Awtomatlaşdyryş bölekleri, bütin dünýä boýunça üpjünçilik
0
  • IC693APU301
  • IC693APU301-1
  • IC693APU301-2
1 3

IC693APU301

GE Fanuc IC693APU301 Positioning Module | Original Stock

Skladda bar (21 sany), ibermek üçin taýýar

  • Manufacturer: General Electric

  • Product No.: IC693APU301

  • Product Type: Axis Positioning Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 günlük yzyna gaýtaryş syýasaty · 12 aýlyk kepillik
  • Çalt eltip berme
  • 24/7 goldaw
  • Hil üpjünçiligi

Düşündiriş

GE Fanuc IC693APU301 Single Axis Positioning Module

The IC693APU301 (also cataloged as the APU301 Single Axis Positioning Module) executes motion control within the GE Series 90-30 PLC backplane. It integrates axis positioning with PLC logic solving, providing one axis of servo loop control per module in a single-slot form factor.

Hardware Specifications

Parameter Specification
Model IC693APU301
Brand GE Fanuc
Product Type Single Axis Positioning Module (APM)
Platform Series 90-30 PLC
Number of Axes 1
Servo Loop Update Time 1 millisecond
Control Method Logic-based axis control
Operating Modes Standard mode, Follower mode
Max Modules per CPU 8 in a modular CPU system
Installation Any Series 90-30 CPU, remote baseplate, or expansion baseplate
Configuration Software VersaPro
Weight Approx. 0.5 kg (module only)

Motion Control Modes

The IC693APU301 operates in two selectable modes. Standard mode combines motion control with PLC logic solving, allowing the module to execute positioning programs while the CPU scans ladder logic. Follower mode enables electronic gearing, where the axis follows a master encoder or command source for continuous master/slave operations. Axis control is logic-based, with the servo loop closed every 1 millisecond. Up to 8 modules can reside in a modular CPU system, giving a maximum of 8 axes per rack configuration.

Field Installation Guidelines

Insert the module into any available slot in the Series 90-30 CPU, remote baseplate, or expansion baseplate. Verify the backplane connector is fully seated before applying power. Confirm the total number of APM modules does not exceed 8 in a modular CPU system. Route servo command and encoder feedback cables separately from high-voltage AC conductors to prevent induced noise on the 1 millisecond loop. Use shielded cable for encoder and analog command lines, with the shield terminated at the module end only. Configure axis parameters in VersaPro before enabling the servo. Verify the 1 millisecond servo loop update is stable by monitoring axis following error under load.

Frequently Asked Questions

Q: How many IC693APU301 modules can be installed in one system?
A: Up to 8 modules in a modular CPU system. Each module provides one axis of control.

Q: Can the module be installed in a remote baseplate?
A: Yes. It can be installed in any Series 90-30 CPU, remote baseplate, or expansion baseplate.

Q: What software is used for configuration?
A: VersaPro software is recommended for setup and configuration of motion programs.

🏷️ Tags: Positioning Module

Skalyar (V/f)

Wektor

AC tok bilen işleýän
  • Sargyt etmezden ozal takyk modeli, bölek belgisini we aýratynlyklary tassyklaň.
  • Bar bolan enjamyňyz ýa-da dolandyryş ulgamlaryňyz bilen laýyklygyny üpjün ediň.
  • Tehniki kömek üçin sale@etowonauto.com ýa-da +8617859788089 arkaly habarlaşyň.
  • Eltip beriş mümkinçiliklerini, öňdebaryş möhletlerini we iberiş talaplaryny gözden geçiriň.
  • Gurnama wagty öndürijiniň görkezmelerine hem-de iň oňat tejribelere eýeriň.

Stokda bar bolan harytlar adatça şol bir iş gününde ugradylýar. Häzir stokda bolmadyk önümler üçin iberiş wagty elýeterliligine görä üýtgäp biler. Halkara eltip bermek mümkindir we eltip bermek tölegleri barýan ýeriňe, agramyna we daşaýjynyň saýlanmagyna görä hasaplanýar.

Harytlar ulanylman we asyl ýagdaýynda bolmak şerti bilen, alnan gününden başlap 30 günüň içinde yzyna gaýtarmak kabul edilýär. Yzyna iberiş üçin eltip bermek çykdajylary müşderiniň jogapkärçiliginde. Yzyna gaýtarmak baradaky rugsaty almak üçin, haýsydyr bir harydy yzyna ugratmazdan öň biziň bilen habarlaşmagyňyzy haýyş edýäris.

Has giňişleýin maglumat üçin, biziň Iberiş we yzyna gaýtarmak syýasatymyzy.

 Önüm jikme-jikliklerini gör

Enjamlaryň ygtybarly işlemegini üpjün ediň

Iň täze köpugurly elektronika çözüwleri bilen öýüňizi özgertmegiňiz mümkin — akylly yşyklandyryşdan başlap, ses arkaly dolandyrylýan enjamlara çenli; bularyň hemmesi durmuşy has aňsat, has howpsuz we has baglanyşykly etmek üçin döredilen. Amallaryňyzy Bently Nevada 3500 Gözegçilik ulgamy bilen optimizirlaň, ol näsazlyklaryň öňüni almak we işleme döwrüni iň ýokary derejede saklamak üçin hakyky wagt režiminde wibrasiýa we enjamyň ýagdaýyna gözegçilik edýär.

Häzir satyn al
Senagat awtomatizasiýa degişli bölekleri üçin ädimme-ädim tehniki maslahatlar we satyn alma boýunça teklipler.

Tehniki we satyn alyş gollanmasy

Ähli blogy gör