Bently Nevada 330877-080-36-00 Extension Cable 8.0m

Product Overview

The 330877-080-36-00 is an authentic, high-performance 3300 XL 50 mm Extension Cable engineered by Bently Nevada (a Baker Hughes business). This industrial-grade component is an essential part of the premium 3300 XL proximity transducer system, universally deployed to monitor critical machinery health metrics such as axial thrust, fluid-film bearing vibration, and shaft position. Built with a robust FluidLoc triaxial jacket, this 8.0-meter unarmored cable serves as the vital electrical link transferring high-frequency eddy-current signals from the 50 mm proximity probe to the remote Proximitor sensor module. Safely stored in its original factory packaging, this brand-new unit features a comprehensive 12-month factory warranty and carries a net hardware shipping weight of approximately 1.35 lbs (approx. 0.61 kg) per extended assembly.

The visual highlights the lightweight, highly flexible construction of the unarmored 3300 XL extension line. The protective caps shield the high-precision miniature coaxial connectors from dust and mechanical contact during transit and installation, while the specialized light-blue jacket houses the advanced FluidLoc internal sealing barriers.

Core Technical Advantages

• FluidLoc Cable Technology: Utilizes an advanced internal block barrier design that prevents process fluids, lubrication oils, or chemical vapors from wicking through the cable interior into the control panel if the outer jacket is punctured or exposed.
• High-Tier Triaxial Shielding: Built with a 75 Ω triaxial structure insulated with Perfluoroalkoxyethylene (PFA). This multi-layered architecture guarantees exceptional cross-talk isolation and guards low-amplitude signals against severe industrial electromagnetic interference (EMI).
• Extended 8.0-Meter Reach: Provides a longer baseline distance layout, allowing junction boxes to be installed further away from harsh, high-vibration machine casings while maintaining pristine signal transmission.
• Extreme Thermal Operating Resilience: Specifically rated to operate flawlessly in ambient environments spanning from -51°C up to +200°C (-31°F to +392°F), making it ideal for the extreme temperatures found inside steam turbine housings, gas compressors, and industrial pump skids.

Technical Specifications

Model Number Breakdown

The part number 330877-080-36-00 conforms to standard Bently Nevada engineering matrix definitions:

• 330877: Core product platform code for the high-precision 3300 XL 50 mm Extension Cable system.
• 080: Specifies a baseline linear length of precisely 8.0 meters of active, raw signal line.
• 36: Selects the proprietary FluidLoc Cable layout, providing high chemical resistance and fluid-wicking barriers without an external interlocking metal conduit.
• 00: Standard electrical configuration with **No Agency Approvals** attached to the factory shipping block.

Installation & Loop Tuning Guide

• Total Tuning Length Balancing Rule: Crucial to system accuracy: the combined length of your extension cable and the proximity probe's integrated lead must exactly equal the total calibrated length required by your 3300 XL Proximitor Sensor (typically 9.0 meters total loop system). For example, pairing this 8.0-meter extension cable with a 1.0-meter probe creates a perfect 9.0-meter matched loop. Mixing lengths will alter the system's impedance and cause significant calibration drift or system errors.
• Coaxial Connector Mechanical Protection: Use care when connecting the miniature coaxial interfaces. Avoid over-tightening or twisting the center conductor pin, which can degrade signal clarity. Because the unarmored 8.0m cable has a lightweight mass profile of 1.35 lbs, it should be anchored along its routing path with soft clamps to avoid mechanical whipping or connector tension in turbulent machine areas. Bently Nevada recommends wrapping the final connection in silicone self-fusing tape to shield the junction from oil contamination.
• Minimum Bend Radius Constraints: When routing the 8.0-meter FluidLoc cable through conduit lines or cable trays, maintain the factory-recommended minimum bend radius. Tight kinks or sharp corners can distort the internal PFA insulation geometries, changing the 75 Ω line impedance and introducing unwanted measurement ripple.

Technical FAQs

Q1: Why are the DC resistance values higher for this model compared to shorter configurations?
A1: Cable DC resistance increases proportionally with length. Because this is an 8.0-meter assembly, the center conductor resistance is naturally higher (2.0 ± 0.5 Ω) than a standard 4.0-meter cable (1.0 ± 0.25 Ω). Field technicians should reference these length-specific values during loop checkouts to accurately verify line integrity.

Q2: What is the main advantage of the FluidLoc design (Option 36) over a standard extension cable?
A2: Standard cables can act like a straw if the outer jacket is cut, allowing pressurized oil, moisture, or chemicals to travel down the internal braid. FluidLoc cables feature internal blockages that stop gases and liquids from migrating through the cable, protecting your junction boxes and control room panels from hazardous process fluids.

Q3: Does the unarmored version offer high structural durability given its light 1.35 lbs design?
A3: Yes. The PFA jacket is highly resilient against mechanical abrasion, slicing, and harsh machine oils. However, if your installation path is directly exposed to flying metal debris, worker foot traffic, or heavy environmental impacts, an armored variation (such as option -37 with stainless steel armor) is recommended for enhanced physical defense.