Iň täze köpugurly elektronika çözüwleri bilen öýüňizi özgertmegiňiz mümkin — akylly yşyklandyryşdan başlap, ses arkaly dolandyrylýan enjamlara çenli; bularyň hemmesi durmuşy has aňsat, has howpsuz we has baglanyşykly etmek üçin döredilen. Amallaryňyzy Bently Nevada 3500 Gözegçilik ulgamy bilen optimizirlaň, ol näsazlyklaryň öňüni almak we işleme döwrüni iň ýokary derejede saklamak üçin hakyky wagt režiminde wibrasiýa we enjamyň ýagdaýyna gözegçilik edýär.
Haryt kody:129478-01
Bently Nevada 3500/15 129478-01 HV DC PIM 88-140V 2.5A
Manufacturer: Bently Nevada
Product No.: 129478-01
Product Type: Power Supply Module
Product Origin: USA
Payment:T/T, Western Union
Weight: 340g
Shipping port: Xiamen
Warranty: 12 months
Paýlaş
- Çalt eltip berme
- 24/7 goldaw
- Hil üpjünçiligi
Düşündiriş
Bently Nevada 3500/15 129478-01 High Voltage DC Power Input Module
Product Overview
Bently Nevada 3500/15 129478-01 is a high voltage DC power input module (PIM) for 3500 rack systems. Input voltage 88 to 140 V DC. Full rack current draw 2.5 A maximum. Used with High Voltage DC Power Supply. Module weight 0.34 kg.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Bently Nevada |
| Product Number | 3500/15 129478-01 |
| Product Type | High Voltage DC Power Input Module |
| Input Voltage | 88 to 140 V DC |
| Full Rack Current Draw | 2.5 A maximum |
| Minimum Loading | No minimum rack load required |
| Operating Temperature | -30°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 95% non-condensing |
| Dimensions (H x W x D) | 120.7 x 25.4 x 114.3 mm |
| Weight | 0.34 kg |
Key Features
- High voltage DC input 88 to 140 V DC
- 2.5 A maximum full rack current draw
- Half-height module directly behind power supply
- No minimum rack load required
- Under-voltage does not harm supply or PIM
- Over-voltage causes fuse to open on PIM
- Supply OK front panel LED indicator
Rack Configuration
- Two half-height slots on left side of rack
- Each slot accommodates one power supply
- Both slots can hold power supplies simultaneously for redundancy
Installation & Wiring Guide
Wiring Checklist: Verify DC source voltage between 88-140V before connection. Use appropriately rated DC circuit breaker. Connect positive to + terminal, negative to - terminal. Torque terminal screws to 0.56 Nm. Install PIM directly behind associated power supply slot. Under-voltage does not damage module. Over-voltage opens internal PIM fuse.
Grounding: Connect rack ground terminal to plant earth ground using #10 AWG wire. Keep DC power cables away from signal wiring. Rack must have proper earth ground before power application.
Redundancy: Install two PIMs with two power supplies for redundant DC feed. Each PIM occupies one slot. Both can operate simultaneously. During replacement, remove failed unit after isolating DC source. Spare PIM slides directly in without rack power removal.
FAQs
Q1: What voltage range does 129478-01 accept?
A1: 88 to 140 V DC. Verify voltage at source terminals before connecting module. Over-voltage opens internal PIM fuse.
Q2: What torque for terminal connections?
A2: Torque terminal screws to 0.56 Nm. Loose connections cause voltage drop and heating. Use ring terminals for stranded wire.
Q3: Can I hot-swap the PIM?
A3: No. Isolate DC source before removal. Rack does not need power down. Replace failed PIM by sliding new unit into same slot.
Goşmaça spesifikasiýalar
Skalyar (V/f)
Wektor
AC tok bilen işleýän
Satyn alyş gollanmasy
- Sargyt etmezden ozal takyk modeli, bölek belgisini we aýratynlyklary tassyklaň.
- Bar bolan enjamyňyz ýa-da dolandyryş ulgamlaryňyz bilen laýyklygyny üpjün ediň.
- Tehniki kömek üçin sale@etowonauto.com ýa-da +8617859788089 arkaly habarlaşyň.
- Eltip beriş mümkinçiliklerini, öňdebaryş möhletlerini we iberiş talaplaryny gözden geçiriň.
- Gurnama wagty öndürijiniň görkezmelerine hem-de iň oňat tejribelere eýeriň.
Eltip bermek we gaýtarmak
Stokda bar bolan harytlar adatça şol bir iş gününde ugradylýar. Häzir stokda bolmadyk önümler üçin iberiş wagty elýeterliligine görä üýtgäp biler. Halkara eltip bermek mümkindir we eltip bermek tölegleri barýan ýeriňe, agramyna we daşaýjynyň saýlanmagyna görä hasaplanýar.
Harytlar ulanylman we asyl ýagdaýynda bolmak şerti bilen, alnan gününden başlap 30 günüň içinde yzyna gaýtarmak kabul edilýär. Yzyna iberiş üçin eltip bermek çykdajylary müşderiniň jogapkärçiliginde. Yzyna gaýtarmak baradaky rugsaty almak üçin, haýsydyr bir harydy yzyna ugratmazdan öň biziň bilen habarlaşmagyňyzy haýyş edýäris.
Has giňişleýin maglumat üçin, biziň Iberiş we yzyna gaýtarmak syýasatymyzy.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Çalt eltip bermek
Asyl senagat awtomatizasiýa şaýlary gyssagly iberiliş üçin bütin dünýä boýunça elýeterlidir.
-
Aňsat gaýtaryşlar
Ygtybarly satuwdan soňky gorag üçin 30 günlük yzyna gaýtarmak goldawy we 12 aýlyk kepilnama.
-
24/7 goldaw
Durnukly we netijeli işleýşi saklamaga ýardam edýän çeýe, professional goldaw.
-
Hakyky we Asyl
100% hakyky, ygtybarly senagat awtomatizasiýasy öndürijilerinden gönüden-göni üpjün edilýär.
Tehniki we satyn alyş gollanmasy
-
Can Eddy-Current Probes Prevent LNG Compressor Shutdowns?
This technical article examines how Bently Nevada eddy-current proximity probes provide high-precision vibration...
-
Can SIL 3 PLCs Really Slash $1M in Annual Offshore Maintenance?
This technical article examines how Allen‑Bradley GuardPLC SIL 3 safety controllers reduce unplanned offshore downtim...
-
Can Emerson DeltaV DCS Cards Optimize Chemical Safety Loops?
This technical article examines how Emerson DeltaV DCS card upgrades address legacy control limitations in chemical p...
-
Is Partial CNC Board Replacement Better Than a Full System Upgrade?
This technical article examines the dominance of GE Fanuc CNC hardware in heavy-duty automation, supported by field d...
-
Can Genuine PLC Modules Cut DCS Downtime 60%?
This article examines how genuine Allen-Bradley PLC module replacement strategies directly reduce unplanned DCS downt...
-
Is Your GE Fanuc PLC Talking to ABB DCS?
This article reveals how cross-system data silos between GE Fanuc PLC and ABB DCS cause 8–15% production losses in pr...
