IC693MDL653 GE Fanuc Series 90-30 32pt Input Module

Product Overview

The IC693MDL653 is a high-density 24 VDC Positive / Negative Logic discrete input module belonging to the legacy Series 90-30 Programmable Logic Controller (PLC) platform, originally produced by GE Fanuc. Engineered to provide versatile operational flexibility, this module features thirty-two (32) discrete input channels organized into four (4) isolated groups of eight (8) channels each. Every group is provisioned with two (2) distinct common terminals, allowing multiple wiring combinations and ensuring partial system runtime protection if an isolated circuit encounters a fault. This high-density architecture has a net hardware weight of approximately 0.31 kg (0.68 lbs) and requires the use of dedicated pre-wired or mating connector cables for secure, error-free terminal block termination, delivering exceptionally stable diagnostic processing across standard 5-slot or 10-slot PLC baseplates.

Technical Specifications

Installation & Wiring Guidelines

Physical Integration: The IC693MDL653 can be safely mounted into any available I/O slots on a standard Series 90-30 5-slot or 10-slot baseplate. Given its compact form factor and light weight of 0.31 kg, ensure the module aligns perfectly with the plastic guide rails before pushing firmly to seat the backplane connectors. Always disconnect the master rack power supply prior to inserting or removing the hardware block.
Field-Side Wiring: Because this is a high-density module interface, standard terminal screws are replaced by a dedicated front-facing multi-pin connector. Use a factory-certified pre-wired mating cable equipped with flying leads on the opposite end. Ensure the negative or positive logic configurations match your external sensor types, and correctly jumper the two common terminals provided within each isolated eight-channel bank to maintain signal symmetry.

Technical FAQs

Q1: Can the IC693MDL653 handle both sourcing and sinking field wiring layouts?

A1: Yes. The module features flexible Positive / Negative Logic capabilities, meaning it seamlessly accommodates either sinking or sourcing inputs depending on how the group common lines are terminated.

Q2: What are the exact voltage parameters required to trigger an On-state signal?

A2: An input channel switches to an active "On" state when it detects a minimum of 15 VDC and draws at least 4.5 mA of loop current. It drops back to an "Off" state if voltage falls below 6 VDC.

Q3: How much internal current does the card consume from the baseplate bus?

A3: The logic-side electronics draw a minimal 5 mA from the 5 VDC backplane bus when a typical workload of 16 input channels are energized simultaneously.

Commercial Contact Email: sale@etowonauto.com