GE Fanuc IC693MDL330 Output Module | 8 Point 120/240V AC

Product Overview

GE Fanuc IC693MDL330 Discrete Output Module is an 8-point AC output module for the Series 90-30 family. It operates at 120/240V AC with an 85-264V AC range at 50/60 Hz. This module delivers 2A maximum per point for controlling solenoids, contactors, and valves.

Module Specifications

Installation Guide

Mount the module in any Series 90-30 rack slot. Connect AC loads between the output terminal and neutral. Each output handles 2A continuous and 20A inrush for one cycle. The 8 outputs are arranged in two groups of 4 with 1500V isolation. Ensure minimum load current of 100mA for reliable switching.

Engineering Advantages

The IC693MDL330 delivers 1ms on response time for rapid actuator control. Off response time of 0.5 cycles maximizes energy efficiency. Output leakage current is just 3mA at 120V AC and 6mA at 240V AC, preventing false load activation. Power consumption is only 160mA from the 5V backplane bus.

FAQs

Q1: Can this module switch DC loads?
A1: No. The IC693MDL330 is designed for AC loads only at 85-264V AC, 50/60 Hz.

Q2: What happens if the minimum load current of 100mA is not met?
A2: The output may not switch reliably or may exhibit false triggering. Add a bleed resistor across the load to increase current.

Q3: How many outputs can operate simultaneously at 40°C?
A3: Each group of 4 outputs handles 4A maximum total at 40°C. Derating applies above 40°C.