GE Fanuc IC670MDL730 8-Point 24VDC Positive Logic Module

GE Fanuc Field Control 24VDC 2A ESCP Discrete Output Module (IC670MDL730)

The GE Fanuc IC670MDL730 is an 8-point discrete positive logic output module from the Field Control I/O series, designed to drive heavy-duty industrial loads up to 2.0 Amps per channel. Operating on a nominal 24 VDC external supply (10 to 30 VDC operating range), this high-current sourcing module incorporates Electronic Short Circuit Protection (ESCP) and supports Pilot Duty applications. Weighing approximately 0.91 kg (2.0 lbs), it features individual logic-side status LEDs, a dedicated PWR indicator, and 250 VAC user-to-logic isolation for robust system protection.

Key Performance Advantages

Provides high output switching capacity with up to 2.0 A current output per point (or 16 A total per module) for direct actuation of solenoids, contactors, and motor starters. Built-in Electronic Short Circuit Protection (ESCP) automatically safeguards internal output circuitry from field wiring overloads and short circuits, eliminating the need for external fuse maintenance.

Technical Specifications

Installation & Maintenance Guidelines

• Base Plate Installation: Align the IC670MDL730 module with the terminal block base slot and press firmly until the side locking latches click into place against the Field Control backplane.
• Field Wiring & Power Load: Supply 24 VDC external power to the user terminals to drive connected loads up to 2.0 A per point. Ensure field wiring is rated for high-current loads and wired into appropriate box or barrier terminals.
• Diagnostic Monitoring: Observe the front panel "PWR" indicator for valid power supply feed and monitor individual point LEDs to verify active output switching and fast diagnostic fault responses.

Frequently Asked Questions

Q1: Has EMC filter?
A1: N/A (discrete PLC module).

Q2: Key feature vs PF523?
A2: 2A continuous output per point & ESCP protection.

Q3: Drives 3-phase motors?
A3: No, drives discrete DC loads and relays.