Bently Nevada 330101-29-52-10-02-05 ClickLoc Probe

Bently Nevada 330101-29-52-10-02-05 3300 XL 8 mm Probe

Bently Nevada 330101-29-52-10-02-05 is a 3300 XL series 8 mm probe with 3/8-24 UNF thread. Features PPS tip, patented TipLoc and CableLoc designs, without armor.

Model Configuration

Parameter	Value

Full Model 330101-29-52-10-02-05 Probe Type 3300 XL 8 mm, 3/8-24 UNF thread, no armor Unthreaded Length 29 = 2.9 in Overall Case Length 52 = 5.2 in Total Length 10 = 1.0 m (3.3 ft) Connector & Cable Type 02 = Miniature coaxial ClickLoc, standard cable Agency Approval 05 = CSA, ATEX, IECEx

DC Resistance & Capacitance

Parameter	Value
Probe DC Resistance (1.0m)	7.59 ± 0.50 ohms
Extension Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical

Physical Specifications

Component	Material / Value
Tip Material	PPS (Polyphenylene sulfide)
Case Material	AISI 303 or 304 Stainless Steel
Cable Pull Strength	330 N (75 lbf) - CableLoc design
Weight	323 g/m (11.4 oz/m)

Performance Specifications

Parameter	Value
Linear Range	2 mm (80 mils) from 0.25 to 2.3 mm
Recommended Gap (Radial Vibration)	-9 Vdc (approx 1.27 mm / 50 mils)
Incremental Scale Factor (1/5m System)	7.87 V/mm (200 mV/mil) ±5%
Incremental Scale Factor (9m System)	7.87 V/mm (200 mV/mil) ±6.5%
DSL (1/5m System)	±0.025 mm (±1 mil) @ 0°C to +45°C

Field Wiring

• Wire size: 0.2 to 1.5 mm² (16 to 24 AWG)
• Recommended: 3 conductor shielded triad cable with tinned wiring
• Maximum length: 305 m (1,000 ft) between Proximitor Sensor and monitor

Temperature Range

Condition	Range
Standard Probe Operating	-52°C to +177°C (-62°F to +350°F)
ETR Probe Tip	-52°C to +218°C (-62°F to +425°F)
ETR Cable & Connector	-51°C to +260°C (-60°F to +500°F)

Design Features

• Patented TipLoc molding for robust tip-to-body bond
• Patented CableLoc design with 330 N (75 lbf) pull strength
• Optional FluidLoc cable prevents oil leakage through cable interior
• Thicker PPS encapsulation for rugged durability
• Viton® O-ring pressure seal

Certifications

• CSA, ATEX, IECEx (Approval Option 05)
• FCC Part 15 Compliant
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU

FAQs

Q1: What is the recommended gap setting for radial vibration?
A1: -9 Vdc, approximately 1.27 mm (50 mils) from target.

Q2: What is the linear range of this probe?
A2: 2 mm (80 mils) from 0.25 to 2.3 mm (10 to 90 mils).

Q3: What is the pull strength of the CableLoc design?
A3: 330 N (75 lbf) for secure cable and tip attachment.