Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.
SKU:6ES7350-1AH03-0AE0
SIEMENS 6ES7350-1AH03-0AE0 S7-300 Counter Module
Manufacturer: Siemens
Product No.: 6ES7350-1AH03-0AE0
Product Type: Counter Module
Product Origin: DE
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months
Del
- Rask levering
- 24/7 kundestøtte
- Kvalitetssikring
Beskrivelse
SIEMENS 6ES7350-1AH03-0AE0 SIMATIC S7-300 FM 350-1 Counter Module
The SIEMENS 6ES7350-1AH03-0AE0, also cataloged as the FM 350-1 Counter Module, operates as a dedicated single-channel high-speed counter for S7-300 systems, processing incremental encoder signals up to 500 kHz over the backplane bus.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6ES7350-1AH03-0AE0 |
| Brand | SIEMENS |
| Product Type | FM 350-1 Counter Module |
| Series | SIMATIC S7-300 |
| Weight | 250 g (approx.) |
| Dimensions | 40 mm width x 125 mm height x 120 mm depth |
| Rated Supply Voltage | 24 VDC |
| Permissible Voltage Range | 20.4 V to 28.8 VDC (dynamic 18.5 V to 30.2 V) |
| Current from Load Voltage 1L+ | 40 mA max (without load) |
| Current from Backplane Bus | 160 mA max at 5 VDC |
| Power Loss | 4.5 W typ. |
| Counter Inputs | 1 channel, 32 bit or +/-31 bit |
| Counting Frequency | 500 kHz max (5 V), 200 kHz max (24 V) |
| 5 V Encoder Supply | 5.2 V +/-2%, 300 mA max |
| 24 V Encoder Supply | 1L+ (-3 V), 400 mA max |
| Digital Inputs | 3 (gate start, gate stop, counter set) |
| Digital Outputs | 2, short-circuit protected, 0.5 A rated |
| Front Connector | 1x 20-pin |
| Isolation | Tested at 500 V |
Counter Inputs and Encoder Interface
Single 32-bit counter channel accepts symmetrical incremental encoders with two pulse trains offset by 90 deg, asymmetrical incremental encoders, 24 V initiators, and 24 V directional elements with one pulse train and one direction level. The 5 V counter input uses RS 422 differential signaling with a 220 ohm terminating resistor and 1.3 V differential input voltage. The 24 V counter input accepts +11 V to +28.8 V for signal "1" and -28.8 V to +5 V for signal "0" at 9 mA typical input current, with a minimum pulse width of 2.5 us. Potential separation between channels and the backplane bus is provided by optocouplers on digital inputs, digital outputs, and the counter. Isochronous mode is supported for deterministic cycle-synchronized operation. A configuration package is included on CD.
Frequently Asked Questions
Q: What is the maximum counting frequency of the FM 350-1?
A: 500 kHz for the 5 V RS 422 differential input, and 200 kHz for the 24 V input.
Q: What is the weight and physical size of the 6ES7350-1AH03-0AE0?
A: Approximately 250 g, with dimensions of 40 mm width, 125 mm height, and 120 mm depth.
Q: What front connector does the module require?
A: One 20-pin front connector.
Field Installation Guidelines
Insert the module into an S7-300 rack and secure with the mounting screws. Wire the 20-pin front connector per the module pin assignment before energizing. Verify supply voltage at 1L+ and 2L+ is within 20.4 V to 28.8 VDC. Route encoder cables separate from high-current power conductors to preserve signal integrity at 500 kHz. Confirm the 5 V encoder supply load does not exceed 300 mA and the 24 V encoder supply load does not exceed 400 mA. Verify the encoder type and signal format match the configured counting mode before commissioning.
Ytterligere spesifikasjoner
Skalar (V/f)
Vektor
AC-drevet
Kjøpsveiledning
- Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
- Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
- Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
- Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
- Følg produsentens instruksjoner og beste praksis under installasjon.
Frakt og retur
Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.
Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.
For mer informasjon, vennligst se vår Frakt- og returpolicy.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Rask levering
Originale deler til industriell automasjon tilgjengelig for rask levering over hele verden.
-
Enkel retur
30 dagers returrett med 12 måneders garanti for pålitelig etterkjøpsbeskyttelse.
-
24/7 støtte
Responsiv profesjonell støtte for å hjelpe med å opprettholde stabile og effektive operasjoner.
-
Ekte og original
100 % autentisk, hentet direkte fra pålitelige produsenter av industriell automasjon.
Teknisk og kjøpsguide
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
-
What CFC Rules Cut PCS7 Batch Abort Rates Fast?
This article presents enforceable CFC programming governance rules for Siemens PCS7 DCS batch plants, covering b...
-
What Makes the 1769-L3ER Ideal for Compact Skid Automation?
This guide explains how the Allen-Bradley 1769 CompactLogix L3ER bridges the gap between micro PLCs and large DC...
-
Why Do SIL3 Safety Interlocks Still Trip in Industrial Plants?
This article reviews Honeywell Safety Manager SIL3 SIS architecture, wiring and cabinet installation rules, PFDa...
-
How Does Poor Grounding Cause 4-20mA Signal Drift?
This guide explains how MTL signal isolators fail through distortion, drift and EMI in PLC and DCS loops, then d...
