Automatiseringsdeler, global levering
0
  • 330101-00-28-90-02-00
  • 330101-00-28-90-02-00-1
  • 330101-00-28-90-02-00-2
1 3

330101-00-28-90-02-00

Original Bently Nevada 330101-00-28-90-02-00 8mm Probe

På lager (21 enheter), klar til å sendes

  • Manufacturer: Bently Nevada

  • Product No.: 330101-00-28-90-02-00

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 450g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 dagers returrett · 12 måneders garanti
  • Rask levering
  • 24/7 kundestøtte
  • Kvalitetssikring

Beskrivelse

Product Overview

The Bently Nevada 330101-00-28-90-02-00 is a high-performance 3300 XL Series 8 mm eddy current proximity probe designed for continuous shaft vibration, thrust position, and speed monitoring in critical machinery. Featuring a 3/8-24 UNF fully-threaded body with 0.0 inches unthreaded length and a 2.8-inch (71 mm) overall case length, this sensor is built with an integrated 9.0-meter (29.5 feet) standard coaxial cable terminated with a miniature coaxial ClickLoc™ connector and connector protector. Manufactured with an impact-resistant Polyphenylene sulfide (PPS) tip, TipLoc™ tip-molding, CableLoc™ 330 N cable retention, and an AISI 304 stainless steel case, the assembly has an approximate net hardware weight of 0.45 kg (0.99 lbs). It operates reliably across severe temperature conditions from -51°C to +177°C (-60°F to +351°F) and provides full interchangeability without individual system recalibration.

Technical Specifications

Parameter Specification Details
Manufacturer Bently Nevada
Part Number 330101-00-28-90-02-00
Product Line 3300 XL 8 mm Proximity Transducer System
Thread & Casing Dimensions 3/8-24 UNF thread / 0.0 in unthreaded / 2.8 in overall case length
Total Cable Length 9.0 meters (29.5 feet) nominal
Connector & Approval Profile Miniature coaxial ClickLoc™ connector with protector / No agency approvals
Linear Range & Scale Factor 2.0 mm (80 mils) linear range / 7.87 V/mm (200 mV/mil) ISF
Recommended Target Gap 1.0 mm (40 mils) corresponding to -10 Vdc bias output
Probe DC Resistance 12.6 Ω ± 0.8 Ω (Center to outer conductor for 9.0m cable)
Cable Capacitance & Construction 69.9 pF/m typical / FEP insulated 75 Ω coaxial cable
Operating Temperature Range -51°C to +177°C (-60°F to +351°F)
Component Net Weight Approx. 0.45 kg (0.99 lbs)

Installation & Torque Guidelines

Mechanical Installation: Thread the probe into a tapped 3/8-24 UNF housing opening. Apply the recommended installation torque of 7.3 N•m (65 in•lb), taking care not to exceed the maximum rated torque limit of 12.5 N•m (110 in•lb). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal coaxial conductor fatigue.
Gap Calibration & Connection: Set the initial probe gap to 1.0 mm (40 mils) from the shaft target to establish the nominal -10 Vdc voltage center point. Fasten the ClickLoc connector finger-tight (do not exceed 0.56 N•m / 5 in•lb) and secure the protective sleeve to prevent environmental corrosion and mechanical disengagement.

Technical FAQs

Q1: What does the -90- option code signify in the part number?

A1: The "90" code indicates a 9.0-meter (29.5 feet) total length configuration, allowing direct connection to a 9.0m 3300 XL Proximitor Sensor without an extension cable.

Q2: What is the recommended gap distance for setting probe bias voltage?

A2: The recommended gap is 1.0 mm (40 mils), which yields an approximate -10 Vdc output centered in the 2.0 mm (80 mil) linear operating range.

Q3: What is the maximum field wiring length supported back to the monitoring rack?

A3: Field wiring using 3-conductor shielded triad cable can extend up to 305 meters (1,000 feet) between the 3300 XL Proximitor sensor and the monitor rack.

Commercial Contact Email: sale@etowonauto.com

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Proximity Probe

Skalar (V/f)

Vektor

AC-drevet
  • Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
  • Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
  • Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
  • Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
  • Følg produsentens instruksjoner og beste praksis under installasjon.

Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.

Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.

For mer informasjon, vennligst se vår Frakt- og returpolicy.

 Vis alle detaljer

SIKRE PÅLITELIG MASKINYTELSE

Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.

Kjøp nå
Trinnvis teknisk rådgivning og kjøpstips for deler til industriell automasjon.

Teknisk og kjøpsguide

Se alle blogger