Automatiseringsdeler, global levering
0
1 3

IC697HSC700

IC697HSC700 GE Fanuc Series 90-70 High-Speed Counter Module

På lager (21 enheter), klar til å sendes

  • Manufacturer: General Electric

  • Product No.: IC697HSC700

  • Product Type: High-Speed Counte Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 220g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 dagers returrett · 12 måneders garanti
  • Rask levering
  • 24/7 kundestøtte
  • Kvalitetssikring

Beskrivelse

Product Overview

The GE Fanuc IC697HSC700 is a high-performance, single-slot High-Speed Counter (HSC) module designed for the Series 90-70 PLC system. Engineered for real-time motion control, turbine pulse monitoring, and high-speed material handling, it processes input pulse frequencies up to 200 kHz (or up to 800 kHz in Type E Quadrature x4 mode). Featuring 4 integrated positive logic outputs with short-circuit protection, the IC697HSC700 provides rapid direct output response independent of PLC scan times. Weighing approximately 0.22 kg (0.49 lbs), it offers high-density counting performance in a lightweight module footprint.

Technical Specifications

Parameter Specification
Product Model IC697HSC700
PLC Compatibility GE Fanuc Series 90-70 System
Maximum Input Frequency 200 kHz (Types A/D) / 800 kHz (Type E Quad B x4 Mode)
Input Voltage Levels 5 VDC TTL or 10–30 VDC Differential / Single-Ended
Output Channels 4 Positive Logic (Sourcing) Outputs
Output Voltage & Current 10–30 VDC @ up to 20 mA per channel
Backplane Current Draw 0.8 A @ 5 VDC (from PLC backplane)
Output Protection Electronic Short-Circuit & Overcurrent Protection
Operating Temperature 0°C to 60°C (32°F to 140°F)
Net Weight 0.22 kg (0.49 lbs)

Key Design & Hardware Features

  • High-Speed Pulse Input Processing: Accurately tracks high-speed encoder feedback up to 200 kHz for precise position, velocity, and length measurement.
  • Direct Onboard Outputs: Includes 4 fast-responding outputs that trigger based on pre-set counter match values, bypassing PLC CPU scan delay.
  • Flexible Signal Modes: Configurable for multiple counting modes, including Up/Down counting, Pulse/Direction, and Quadrature A/B encoder inputs.
  • Built-In Circuit Diagnostics: Integrated short-circuit protection and front-panel status LEDs enable visual diagnostic feedback during commissioning.

Installation & Engineering Guidelines

1. Encoder Signal Selection: Select the correct input jumpers or field wiring connections depending on whether your rotary encoder provides 5 VDC differential signals or 10–30 VDC single-ended signals.

2. Shielding & Cable Grounding: Always use twisted-pair shielded cables for high-speed input signals and ground the shield at the module terminal block to suppress high-frequency electrical noise.

3. External Field Power: Connect an external 10–30 VDC power supply to the module terminal block to energize the onboard positive logic output channels.

Frequently Asked Questions (FAQs)

Q1: Can the IC693 series PLCs use the IC697HSC700 module?
A1: No. The IC697HSC700 is specifically designed for the GE Fanuc Series 90-70 backplane and is not physically or electrically compatible with Series 90-30 racks.

Q2: What is the maximum counting frequency supported by the IC697HSC700?
A2: The module supports standard input pulse rates up to 200 kHz, which translates to an effective 800 kHz count rate when configured in Quadrature x4 mode.

Q3: How do the onboard outputs operate relative to the PLC scan cycle?
A3: The 4 onboard outputs operate asynchronously to the CPU scan. They trigger instantly when internal counter registers reach target setpoints, providing millisecond-level response times.

🏷️ Tags: High-Speed Counte Module

Skalar (V/f)

Vektor

AC-drevet
  • Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
  • Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
  • Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
  • Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
  • Følg produsentens instruksjoner og beste praksis under installasjon.

Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.

Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.

For mer informasjon, vennligst se vår Frakt- og returpolicy.

 Vis alle detaljer

SIKRE PÅLITELIG MASKINYTELSE

Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.

Kjøp nå
Trinnvis teknisk rådgivning og kjøpstips for deler til industriell automasjon.

Teknisk og kjøpsguide

Se alle blogger