Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.
SKU:FC-PSUNI2424
Honeywell FC-PSUNI2424 600W Power Supply SIL3
Manufacturer: Honeywell
Product No.: FC-PSUNI2424
Product Type: Power Supply
Product Origin: USA
Payment:T/T, Western Union
Weight: 2900g
Shipping port: Xiamen
Warranty: 12 months
Del
- Rask levering
- 24/7 kundestøtte
- Kvalitetssikring
Beskrivelse
Industrial Power Supply for Safety Systems
Honeywell FC-PSUNI2424 delivers 600W for process and safety controllers. This PSUNI2424 supports SIL3 applications with dual over-voltage protection.
Key Features
- SIL3 Protection: Dual over-voltage protection per IEC 61508.
- Wide Range: 85-265VAC input, -40°C to 70°C operation.
- Parallel Operation: Connect up to eight units for higher current.
- Peak Current: 50A for 200ms clears branch fuses.
- Inrush Limiting: <60A supports 10A type C breakers.
- Hot Swap: ON/OFF switch enables online replacement.
- FAN Alarm: Reduced speed monitoring minimizes wear.
- Hold-Up Time: >50ms meets EN61000-4-11 level 3.
Technical Specifications
- Model: Honeywell FC-PSUNI2424 (PSUNI2424).
- Output Power: 600W continuous, 24V at 0-24A.
- Efficiency: 87% typical at 230VAC, 12-24A load.
- Power Factor: >0.99 at 100VAC, >0.98 at 230VAC/24A.
- Approvals: CE, cUL, SIL3 OVP, CID2 pending.
- Weight: 2.9 kg (6.4 lb).
Input Specifications
- Voltage Range: 85-265VAC operational, 45-66Hz.
- Input Current: 6.2A at 115VAC, 3.1A at 230VAC.
- Inrush Current: <60A, supports 10A type C MCB.
- Internal Fusing: 10A fuse per AC leg line.
- EMI Filter: 2uF between input lines.
Output Specifications
- Output Voltage: 25.7V no load, 25.1V at 24A static load.
- Current Range: 0-24A continuous, 50A peak for 200ms.
- Current Limiter: 34A typical (27-42A) after 200ms.
- Ripple & Noise: 20-40mV ripple, HART compliant.
- Short Circuit: Trips within 1 second at 0.5A, self-restoring.
- Load Sharing: <10% difference at full load between units.
Alarm Specifications
- Type: Solid-state Opto-FET output, isolated to 500VAC.
- Activation: OK when FAN speed normal and output >23.5V.
- Under-Voltage Alarms: DC <23.5V, AC <80V.
- Maximum Voltage: 31V (33V TVS protected).
- Current: 40mA max, non-inductive load only.
- Voltage Drop: <0.2V at 7mA.
Isolation Ratings
- Input to Output: 3750VAC/1min, 8mm creepage.
- Input to Case: 2210VAC/1min with transient protection.
- Output to Case: 1500VDC/1min, <50M Ohm at 250VDC.
Physical Dimensions
- Width: 370 mm (14.6 in).
- Height: 159 mm (6.3 in).
- Depth: 67.3 mm (2.65 in).
- Weight: 2.9 kg (6.4 lb).
Environmental Ratings
- Operating Temp: -40°C to 70°C.
- Storage Temp: -40°C to 85°C.
- Humidity: 5% to 95% RH non-condensing.
- Altitude: 0-2000m above sea level.
- Pollution Degree: PD2 maximum (IEC60664-1).
FAQ
-
Q: Can I parallel PSUNI2424 units for redundancy?
A: Yes. Connect up to eight units in parallel. Load sharing maintains <10% difference at full load. This supports both redundancy and higher current applications. -
Q: What causes the alarm output to activate?
A: Alarm activates when power supply status is OK. This requires FAN speed normal and output voltage above 23.5V. Under-voltage below these thresholds triggers alarm. -
Q: Does FC-PSUNI2424 support HART communication devices?
A: Yes. Output ripple is 20-40mV typical, which meets HART requirements. Clean power ensures reliable communication with HART field devices.
Ytterligere spesifikasjoner
- Sølv
- Hvit
- Svart
Skalar (V/f)
Vektor
AC-drevet
Kjøpsveiledning
- Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
- Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
- Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
- Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
- Følg produsentens instruksjoner og beste praksis under installasjon.
Frakt og retur
Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.
Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.
For mer informasjon, vennligst se vår Frakt- og returpolicy.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Rask levering
Originale deler til industriell automasjon tilgjengelig for rask levering over hele verden.
-
Enkel retur
30 dagers returrett med 12 måneders garanti for pålitelig etterkjøpsbeskyttelse.
-
24/7 støtte
Responsiv profesjonell støtte for å hjelpe med å opprettholde stabile og effektive operasjoner.
-
Ekte og original
100 % autentisk, hentet direkte fra pålitelige produsenter av industriell automasjon.
Teknisk og kjøpsguide
-
Cut Migration Engineering Hours by 60% – How Does It Work?
This technical guide examines the operational risks and engineering overhead of maintaining separate GE Proficy HMI a...
-
Is Your 1756 Supply Chain Risking Production?
Counterfeit 1756 modules cause 68% of unplanned PLC downtime. This guide covers a four-step verification method, real...
-
Why Do 72% of Analog Loop Failures Trace Back to Wiring Errors?
This technical guide presents field-verified wiring protocols for integrating Emerson Rosemount 4–20mA HART transmitt...
-
GE Fanuc VersaMax: Did It Replace Obsolete ABB AC500-ECO?
This technical case study details a complete control system retrofit for a 1200m³/day municipal water plant. Our team...
-
Standardised 3300 Probe Workflow Cuts False Trips by 90%?
Uncalibrated Bently Nevada 3300 probe replacements are responsible for 68% of false turbine trips, costing power plan...
-
Mixed GE Fanuc & ABB Servo Faults? Fix Heavy Lathe Downtime Now?
This guide presents a data-driven Standard Operating Procedure for diagnosing cross-brand motion control faults in he...
