Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.
SKU:25A-B2P5N104
Allen-Bradley 25A-B2P5N104 PowerFlex 523 Drive 0.75kW 2.5A
Manufacturer: Allen-Bradley
Product No.: 25A-B2P5N104
Product Type: AC Drive
Product Origin: USA
Payment:T/T, Western Union
Weight: 1100g
Shipping port: Xiamen
Warranty: 12 months
Del
- Rask levering
- 24/7 kundestøtte
- Kvalitetssikring
Beskrivelse
Allen-Bradley 25A-B2P5N104 PowerFlex 523 AC Drive
The Allen-Bradley 25A-B2P5N104 is a PowerFlex 523 series AC drive delivering 0.75 kW (1 HP) output. Operating on 208-240 VAC three-phase input, this Frame A drive provides 2.5 Amps output current with V/Hz control. Built-in Modbus RTU (RS485) communication enables flexible integration. Weighing approximately 1.2 kg (2.65 lbs), this drive features natural convection cooling and IP20 enclosure for panel mounting applications.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allen-Bradley (Rockwell Automation) |
| Model Number | 25A-B2P5N104 |
| Series | PowerFlex 523 |
| Frame Size | Frame A |
| Cooling | Natural convection cooling |
| Maximum Output Frequency | 60 Hz |
| Control Method | V/Hz Control |
| Nominal Power Output | 0.75 kW (1 HP) |
| Output Current | 2.5 Amps |
| Input Voltage | 208-240 VAC (Three-Phase) |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
| Enclosure Type | IP20 / Open Type |
| Communication Ports | Built-in Modbus RTU (RS485) |
| Interface Module | Standard module |
| Mounting Options | Wall mount or panel mount |
| EMC Filtering | Not included |
| Protection Features | Overload, Overvoltage, Undervoltage, Overcurrent, Short Circuit |
Model Number Breakdown
- 25A – PowerFlex 523 Series
- B – 208-240V AC Input
- 2P5 – 2.5 Amp Output
- N – No EMC Filter
- 104 – Standard Interface Module
Installation & Field Application Guide
- Mount the drive vertically on a flat, non-combustible surface. Allow minimum 50mm clearance above and below for natural convection airflow.
- Size input and output wiring per local electrical codes. Use 14 AWG minimum for power connections.
- Connect RS485 communication wires twisted-pair shielded. Ground the shield at the drive end only.
- Set motor parameters (voltage, current, frequency) during initial commissioning using the integrated keypad or software.
Why Choose the 25A-B2P5N104
- Compact Frame A design saves panel space while delivering 0.75kW output.
- Built-in Modbus RTU enables direct connection to PLCs and SCADA systems.
- Comprehensive protection features safeguard the drive and connected motor.
- Natural convection cooling eliminates fan maintenance and reduces noise.
Field Engineer FAQs
Q1: What is the maximum cable length for Modbus RTU communication?
A1: For RS485 Modbus RTU, maximum cable length is 1200 meters (4000 feet) at baud rates up to 115.2 kbps. Use 120-ohm termination resistors at both ends for long runs.
Q2: Can this drive be used for single-phase input?
A2: No, the 25A-B2P5N104 requires three-phase 208-240V AC input. Single-phase operation will cause under-voltage faults.
Q3: Does this drive support a braking resistor?
A3: Yes, Frame A drives support optional braking resistors for rapid deceleration of high-inertia loads. Use a resistor rated for 5% duty cycle at the drive output.
Inquiries: sale@etowonauto.com
Ytterligere spesifikasjoner
Skalar (V/f)
Vektor
AC-drevet
Kjøpsveiledning
- Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
- Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
- Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
- Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
- Følg produsentens instruksjoner og beste praksis under installasjon.
Frakt og retur
Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.
Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.
For mer informasjon, vennligst se vår Frakt- og returpolicy.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Rask levering
Originale deler til industriell automasjon tilgjengelig for rask levering over hele verden.
-
Enkel retur
30 dagers returrett med 12 måneders garanti for pålitelig etterkjøpsbeskyttelse.
-
24/7 støtte
Responsiv profesjonell støtte for å hjelpe med å opprettholde stabile og effektive operasjoner.
-
Ekte og original
100 % autentisk, hentet direkte fra pålitelige produsenter av industriell automasjon.
Teknisk og kjøpsguide
-
Standardised 3300 Probe Workflow Cuts False Trips by 90%?
Uncalibrated Bently Nevada 3300 probe replacements are responsible for 68% of false turbine trips, costing power plan...
-
Mixed GE Fanuc & ABB Servo Faults? Fix Heavy Lathe Downtime Now?
This guide presents a data-driven Standard Operating Procedure for diagnosing cross-brand motion control faults in he...
-
Why do 68% of steam loop faults trace back to parameter mismatches?
This technical guide addresses the hidden bottleneck of cross-brand DCS and valve positioner integration in thermal p...
-
Is Your Aging GE Fanuc PLC Costing Your Rolling Mill Millions?
This technical article presents a field-validated migration strategy for replacing obsolete GE Fanuc Series 90 PLCs w...
-
Why Do 78% of Petrochemical TSI-DCS Integrations Fail Initially?
This article presents a quantified integration solution for Bently Nevada 3500 vibration systems with ABB DCS in petr...
-
Allen-Bradley vs GE Fanuc: Better PLC ROI?
This data-driven guide compares Allen-Bradley and GE Fanuc PLC controllers for discrete manufacturing Industry 4.0 up...
