Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.
SKU:RTAC-01
64610805 ABB RTAC-01 | RS-232/RS-485 SSI Interface 5V
Manufacturer: ABB
Product No.: RTAC-01
Product Type: Interface Module
Product Origin: SE
Payment:T/T, Western Union
Weight: 120g
Shipping port: Xiamen
Warranty: 12 months
Del
- Rask levering
- 24/7 kundestøtte
- Kvalitetssikring
Beskrivelse
Product Overview
The ABB RTAC-01 (64610805) is an SSI encoder interface module for industrial motion and position feedback systems. It converts Synchronous Serial Interface data into differential signals up to 10 MHz, supporting 16-bit encoding. This compact module weighs just 0.12 kg (0.26 lbs) and mounts on DIN rail or panel for flexible installation.
Core Functionality
The RTAC-01 reads absolute encoder position via the SSI protocol at input frequencies from 0 to 100 kHz. It outputs differential signals for noise-immune transmission to drive controllers and PLC systems. RS-232 and RS-485 interfaces enable configuration and diagnostics. IP40 dust protection and a -10°C to +60°C range suit typical factory environments.
Technical Specifications
| Parameter | Value |
| Product ID | 64610805 |
| Model | RTAC-01 |
| Brand | ABB |
| Power Supply Voltage | 5V DC |
| Interface Protocol | SSI (Synchronous Serial Interface) |
| Interface Type | RS-232 / RS-485 |
| Signal Output | Differential, up to 10 MHz |
| Input Frequency Range | 0 to 100 kHz |
| Resolution | 16-bit encoding |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +85°C |
| Operating Humidity | 0-90% RH (non-condensing) |
| Protection Class | IP40 |
| Mounting Type | DIN Rail or Panel Mount |
| Dimensions (L x W x H) | 115 x 0.4 x 165 mm |
| Weight | Approx. 0.12 kg (0.26 lbs) |
Installation Guide
Mount the RTAC-01 on DIN rail or a flat panel inside the control cabinet. Connect the 5V DC supply to the designated power terminals. Wire the SSI encoder to the input terminals, observing clock and data polarity. Connect RS-232 or RS-485 for configuration. Verify differential output wiring to the drive controller. Maintain humidity below 90% non-condensing.
Engineering Advantages
This module delivers 16-bit encoding for high-precision position feedback. Differential output up to 10 MHz ensures noise-immune signal transmission over long cable runs. Dual RS-232/RS-485 interfaces simplify integration with existing control networks. IP40 dust protection suits factory floor installations. At just 0.12 kg, the slim profile maximizes cabinet space efficiency.
Technical FAQs
Q1: What encoder interface protocol does it support?
A1: SSI (Synchronous Serial Interface). Input frequency 0-100kHz. 16-bit encoding resolution.
Q2: What communication interfaces are available?
A2: RS-232 and RS-485. Differential signal output up to 10 MHz.
Q3: What are the power, weight, and environmental ratings?
A3: 5V DC supply. Weight 0.12 kg. Operating -10°C to +60°C. IP40 protection. Humidity 0-90% non-condensing.
Ytterligere spesifikasjoner
- Grå
Skalar (V/f)
Vektor
AC-drevet
Kjøpsveiledning
- Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
- Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
- Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
- Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
- Følg produsentens instruksjoner og beste praksis under installasjon.
Frakt og retur
Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.
Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.
For mer informasjon, vennligst se vår Frakt- og returpolicy.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Rask levering
Originale deler til industriell automasjon tilgjengelig for rask levering over hele verden.
-
Enkel retur
30 dagers returrett med 12 måneders garanti for pålitelig etterkjøpsbeskyttelse.
-
24/7 støtte
Responsiv profesjonell støtte for å hjelpe med å opprettholde stabile og effektive operasjoner.
-
Ekte og original
100 % autentisk, hentet direkte fra pålitelige produsenter av industriell automasjon.
Teknisk og kjøpsguide
-
How Do You Fix ControlLogix Redundancy Switchover Failures?
This article examines the hidden causes of Allen-Bradley 1756 redundant CPU switchover failures on oil and gas ski...
-
Why Is INFI90 End-of-Life a Growing Risk for Power DCS?
This article examines ABB Bailey INFI90 end-of-life risks in power DCS environments and presents a three-tier moderni...
-
How Do MTL Intrinsic Safety Barriers Protect Petrochemical DCS Loops?
This article explains how industrial automation teams size MTL intrinsic safety barriers for petrochemical DCS a...
-
How Does Bently 3500 TSI Detect Proximity Probe Faults?
This article explains Bently 3500 TSI proximity probe troubleshooting, technical parameters and calibrated insta...
-
How to Diagnose Yokogawa CENTUM VP FCS Redundancy Faults?
This article explains how industrial automation teams can diagnose and debug Yokogawa CENTUM VP FCS controller redund...
-
How Does Siemens S7-1500 PLC Handle PROFINET Real-Time Jitter?
This article examines measurable PROFINET fault modes on Siemens S7-1500 PLC controllers and provides field-prov...
