Automatiseringsdeler, global levering
0
1 3

330104-00-04-10-02-05

330104-00-04-10-02-05 Bently Nevada Proximity Probe

Kun 10 enheter igjen

  • Manufacturer: Bently Nevada

  • Product No.: 330104-00-04-10-02-05

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 320g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 dagers returrett · 12 måneders garanti
  • Rask levering
  • 24/7 kundestøtte
  • Kvalitetssikring

Beskrivelse

Product Overview

The Bently Nevada 330104-00-04-10-02-05 is a high-precision 3300 XL 8 mm Proximity Probe designed for critical industrial machinery monitoring. Engineered and manufactured in the U.S.A., this eddy current sensor provides exceptional accuracy in measuring vibration and position. It is built to operate reliably in harsh environments, featuring a PPS tip and stainless steel housing that maintains performance integrity even under high differential pressure and extreme temperatures.

Core Technical Advantages

Superior Mechanical Durability

The probe tip is constructed from Polyphenylene Sulfide (PPS) and reinforced with a Viton® O-ring, allowing the unit to withstand differential pressures up to 20 bar. The AISI 303/304 Stainless Steel case ensures long-term corrosion resistance in demanding chemical or offshore applications.

Precision Electrical Performance

Designed for zero-drift stability (less than 0.05% over 1000 hours), the sensor offers a linearity deviation of only ±0.5%. The 50 Ω output resistance and optimized supply sensitivity ensure clean signal transmission to the Proximitor® Sensor even over extended cable runs.

Global Compliance & Safety

This probe is fully certified for hazardous locations with ATEX, IECEx, and CSA approvals. It meets Class I, II, and III Division 1 requirements, ensuring safe operation in Zone 0 and Zone 1 explosive atmospheres.

Technical Specifications

Model Configuration 330104-00-04-10-02-05
Thread & Case M10 x 1 Thread | 40 mm Case Length
Operating Voltage -17.5 Vdc to -26 Vdc
Cable System 1.0 Meter with ClickLoc Connector
Pressure Rating 20 Bar Differential Pressure
Approximate Weight 0.32 Kg (Package weight may vary)
Calibration Target AISI 4140 Steel

Engineering Installation Notes

  • Gap Calibration: The probe is optimized for a 1.27 mm (50 mils) static gap setting for linear displacement measurements.
  • Connector Protection: The miniature coaxial ClickLoc connector is IP67-rated. Always ensure the connector is dry and free of debris before mating.
  • Mounting Torque: Avoid over-tightening the M10 threads; use a calibrated torque wrench to ensure the stainless steel case is not deformed during installation.

Technical FAQs

Q1: Can this probe be used with non-steel targets?

A1: While factory-calibrated for AISI 4140 steel, it can measure other conductive materials. However, a custom scale factor will be required to maintain accuracy.

Q2: What is the maximum temperature the probe tip can handle?

A2: The stainless steel housing and PPS tip are designed for high-heat industrial environments, maintaining structural integrity up to 400°C for the housing.

Q3: How does the ClickLoc connector benefit field maintenance?

A3: The ClickLoc system provides an audible click when fully seated and features a specialized seal to prevent oil or moisture ingress, which is the most common cause of signal failure.

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Proximity Probe Proximity Probe
  • Sølv

Skalar (V/f)

Vektor

AC-drevet
  • Bekreft nøyaktig modell, delenummer og spesifikasjoner før bestilling.
  • Sørg for kompatibilitet med ditt nåværende maskineri eller kontrollsystemer.
  • Ta kontakt via sale@etowonauto.com eller +8617859788089 for teknisk assistanse.
  • Gå gjennom leveringsalternativer, leveringstider og fraktkrav.
  • Følg produsentens instruksjoner og beste praksis under installasjon.

Varer på lager sendes vanligvis samme virkedag. For produkter som ikke er på lager for øyeblikket, kan leveringstiden variere basert på tilgjengelighet. Internasjonal frakt er tilgjengelig, og fraktkostnader beregnes ut fra destinasjon, vekt og valgt transportør.

Returer godtas innen 30 dager etter mottak, forutsatt at varene er ubrukte og i original stand. Returfraktkostnader dekkes av kunden. Vennligst kontakt oss før du returnerer en vare for å få returautorisasjon.

For mer informasjon, vennligst se vår Frakt- og returpolicy.

 Vis alle detaljer

SIKRE PÅLITELIG MASKINYTELSE

Forvandle hjemmet ditt med de nyeste multi-elektroniske løsningene, fra intelligent belysning til stemmestyrte enheter – alle designet for å gjøre livet enklere, tryggere og mer tilkoblet. Optimaliser driften med Bently Nevada 3500 overvåkingssystem, som tilbyr sanntids vibrasjons- og maskintilstandsovervåking for å forhindre feil og maksimere oppetid.

Kjøp nå
Trinnvis teknisk rådgivning og kjøpstips for deler til industriell automasjon.

Teknisk og kjøpsguide

Se alle blogger