Na'urar watsawa Bently Nevada 990-04-XX-01-05 MOD 165335-01

Takaitaccen Bayanin Samfur

Bently Nevada 990-04-XX-01-05 MOD 165335-01 ƙaramin na’urar watsawa ce ta kusa (proximity vibration transmitter) mai amfani da madauki, igiyoyi 2, don kariyar injina. Tana haɗuwa kai tsaye da tsarin binciken eddy current probe, tana mai da rawar jikin shaft mara taɓa jiki zuwa siginar analog 4-20 mA mai daidaitaccen masana’antu. Gyaran MOD 165335-01 yana ba ma’aikata damar watsa muhimman bayanan rawar jiki na radial ko matsin turawa na axial kai tsaye zuwa kowane tsarin DCS, PLC, ko SCADA ba tare da buƙatar ɗakunan na’urar kulawa a tsakiya ba.

Tsarin Fasaha

Manyan Fa’idodin Fasaha

Wannan na’urar watsawa tana da ginanniyar ƙirar Proximitor wadda ke daidaita sigina a wurin don rage girman filin allon da kuma rage kuɗin igiyoyin filin. Bayanin gyaran MOD 165335-01 yana tabbatar da daidaiton daidaito mai girma da keɓewa daga hayaniya a cikin muhallan da ke da wahala. Klam na dogon DIN 35 mm da aka riga aka shigar suna ba da damar daura kayan da yawa a juna a cikin akwatunan haɗin gwiwa na gida, yayin da da’irar Not OK/Signal Defeat da ke jikin na’urar ke hana ƙararrawa na karya daga haɗin da ya yi sako-sako.

Takamaiman Bayanai na Fasaha

Jagorar Shigarwa

Daurin Inji da Muhalli

Danna mazaunin ya kama a kan dogon DIN 35 mm a cikin rufaffen muhalli. Ka kiyaye yanayin zafi na iska a cikin iyakar aiki na -40°C zuwa +85°C. Haɗa na’urar a nesa da bututun da ke ɗaukar babban ƙarfi don hana shigar lantarki ta hanyar ƙwayar maganadisu.

Saita Filin da Tazarar Gibba

Haɗa proximity probe da igiyar tsawo zuwa mashigin shigar coaxial. Haɗa multimeter zuwa mahaɗin PROX OUT BNC don sa ido kan wutar gibi na DC. Daidaita tazarar jikin proben har sai ya nuna kusan -10 V DC kafin a matse wurin da aka daure shi.

Ka’idojin Wayar Madauki

Yi amfani da igiyoyi masu juyewa (twisted pairs) masu inganci tare da garkuwa (shielded) don madauki. A daure wayar zubar garkuwa ne kaɗai a sandar ƙasa ta babban kabad ɗin kulawa (bangaren DCS/PLC). A bar garkuwar ba a haɗa ta da ƙasa a kan kan mai watsawar don kawar da madaukai na ƙasa (ground loops).

Fa’idodin Injiniya

Haɗa Tsarin da Aka Kiyasta Don Rage Kuɗi

990-04-XX-01-05 MOD 165335-01 yana rage kuɗin kayan aiki ta hanyar turawa bayanai kai tsaye zuwa tsarin kula da ake da su. Yana kawar da buƙatar matsakaitan racks na kariyar injina yayin da yake ci gaba da bayar da binciken lokaci-na-gaskiya ta hanyar ginanniyar dynamic BNC tap.

Tsarin Daidaiton Ƙa’ida Mai Ƙarfi

Tare da takardar shaida ta ATEX Zone 0/2, CSA Class I Division 2, da amincewar jiragen ruwa ta ABS, wannan mai watsawa yana aiki cikin aminci a cikin yanayin sinadarai masu haɗari, dandamalin teku, da muhallin teku masu matuƙar lalata ƙarfe.

Tambayoyin Fasaha (Technical FAQs)

Q1: Menene alamar MOD 165335-01 ke wakilta a wannan samfurin?

A1: MOD 165335-01 yana nuna takamaiman gyaran masana’anta wanda ke inganta tacewa ko ƙirar ɗaurewar ƙasa ta cikin mai watsawar domin biyan buƙatun musamman na tsarin gine-ginen tsarin kula.

Q2: Ta yaya injiniyoyin filɗi za su gudanar da bincike ta amfani da ginanniyar tashar BNC?

A2: Mashigin dynamic PROX OUT BNC yana fitar da siginar igiyar ruwa ta asali, ba tare da tacewa ba, kai tsaye. Masu fasaha na iya haɗa na’urorin nazari masu ɗaukuwa don duba zane-zanen jujjuyawar shaft na ainihi da kuma tsarukan mitoci.

Q3: Ta yaya mai watsawar ke magance batun karyewar igiyar filɗin kwatsam?

A3: Mai watsawar yana amfani da ginanniyar hanyar binciken matsala ta Not OK. Idan igiya ta karye ko ta yi gajeriyar hanya, ƙarfin halin madauki zai sauka ƙasa da 3.6 mA, wanda ke tayar da faɗakarwar kuskuren transducer a kan PLC ko DCS da aka haɗa.