330101-00-12-10-01-05 Bently Nevada sanda firikwensin da zaren 3/8-24 UNF

Bently Nevada 330101-00-12-10-01-05 3300 XL Bincike 8mm

Bently Nevada 330101-00-12-10-01-05 bincike ne na 3300 XL 8mm tare da zaren 3/8-24 UNF, ba tare da kariya ta ƙarfe ba. Yana da jimillar tsawon akwati inch 1.2, jimillar tsawo mita 1.0, da ƙaramin haɗin coaxial ClickLoc tare da kariyar haɗi. Ya haɗa da amincewar CSA, ATEX, da IECEx. Nauyi: 0.32 kg (0.71 lbs).

Ƙayyadaddun Fasaha

Ƙayyadaddun Kebul na Ƙarin Tsawo

Muhimman Fasali

• Hanyar guga TipLoc mai lasisi tana ba da haɗin ɗaure mai ƙarfi tsakanin ƙarshen bincike da jiki
• Zane na CableLoc mai lasisi yana ba da ƙarfin jan 330 N (75 lbf)
• Zaɓin kebul na FluidLoc na zaɓi yana hana mai da ruwaye yin ɗiga ta cikin kebul
• Ƙarin kauri na rufin nada na bincike a cikin filastik PPS da aka zubar don ƙarfafa daurin sa
• Jikin na'urar gwaji mai babban diamita yana ba da harsashi mafi ƙarfi, mai ƙarin ɗorewa
• Ana ba da shawarar na'urorin gwaji na 8mm domin babban ƙarfi da juriya ga lalacewar jiki
• An ƙera a U.S.A. tare da Takaddar Asali da ake da ita

Ka'idojin Shigarwa

Karfin Juyawa na Kasan Na'urar Gwaji: Matsakaicin karfin juyawa da aka ƙayyade don ƙasan na'urorin gwaji 3/8-24 UNF shi ne 7.3 N·m (65 in·lb). Ana ba da shawarar karfin juyawa na 5.1 N·m (45 in·lb).

Karfin Juyawa na Mai Haɗawa: Yin matse da yatsan hannu kawai ya isa. Kada a wuce 0.56 N·m (5 in·lb).

Mafi Ƙanƙantar Radius ɗin Lanƙwasawa: 25.4 mm (inci 1.0) tare da ko ba tare da sulke bakin karfe ba.

Saita Gibin: Gibin da ake ba da shawara don girgizar radial shi ne -9 Vdc, kusan 1.27 mm (mil 50). Layin daidaito (linear range) yana farawa kusan 0.25 mm (mil 10) daga abin da ake niyya.

Wayar Filin: Ana ba da shawarar 16 zuwa 24 AWG. Yi amfani da kebul triad mai masu ɗaukar sigina 3 (3 conductor shielded triad cable) tare da wayar filin da aka yi wa tin. Tsawon mafi girma tsakanin Proximitor Sensor da na'urar saka idanu shi ne mita 305 (ƙafa 1,000).

Lura game da Zazzabi: Fallasa na'urar gwaji ga zafin jiki ƙasa da -34°C (-30°F) na iya haifar da lalacewar hatimin matsin lamba tun da wuri.

Tambayoyi da Amsoshi (FAQs)

Q1. Menene fa'ida ta na'urorin gwaji na 8mm idan aka kwatanta da ƙananan girma?
A1. Na'urorin gwaji na 8mm suna ba da ƙarin kauri na ƙyallarar murfin wayar (coil) a cikin filastik PPS da aka zuba, wanda ke haifar da na'urar gwaji mai ƙarfi. Babban diamita na jikin na'urar gwaji kuma yana ba da kariyar harsashi mai ƙarfi da ƙarfi daga lalacewar jiki.

Q2. Menene iyakar nisan wayar filin daga Proximitor Sensor zuwa na'urar saka idanu?
A2. Tsawon igiyar da aka yarda dashi mafi girma shi ne mita 305 (ƙafa 1,000) tsakanin na'urar firikwensin 3300 XL Proximitor da na'urar saka idanu. Martanin mitoci (frequency response) yana canzawa idan an yi amfani da igiyoyi masu tsayi fiye da haka.

Q3. Ana gwada matsewar na'urorin gwaji (probes) ne kafin jigila?
A3. A'a. Ana gwada matsewar na'urorin gwaji ne kafin a tura su? A'a, ba a gwada su da matsin lamba kafin jigila ba. Kayan rufe wurin hatimi yana da zoben Viton O-ring. Tuntuɓi sashen ƙira na musamman idan ana buƙatar gwajin hatimin matsin lamba don aikace-aikacenka.