Proximity Probe Bently Nevada 330101-00-14-10-02-CN

Bently Nevada 3300 XL Proximity Probe 330101-00-14-10-02-CN

The Bently Nevada 330101-00-14-10-02-CN is an eddy current proximity probe from the 3300 XL monitoring system. It is designed for precise measurement of shaft vibration and position in critical rotating machinery under extreme environmental conditions.

Technical Specifications

• Brand & Model: Bently Nevada 330101-00-14-10-02-CN
• Series: 3300 XL Monitoring System
• Probe Type: Eddy Current Proximity
• Case Length: 1.4 inches
• Cable Length: 3.3 feet (1 meter standard)
• Mounting Thread: 3/8-24 UNF
• Measurement Range: -17V to +2V output range
• Sensitivity: 7.87 V/mm (±5%)
• Accuracy: ±0.025 mm
• Response Time: 0.08 ms rise time (0-90%)
• Probe Tip Material: PPS (Polyphenylene Sulfide) with high chemical resistance
• Sealing: Viton® O-Ring (300 PSI static test pressure)
• Cable Pull Strength: 75 lbf (MIL-STD-810G certified)
• Operating Temperature: -62°F to +425°F (-52°C to +218°C)
• Humidity Rating: 93% RH for 56 days (IEC 68-2-3)
• Probe Weight: Approx. 0.32 kg (11.4 oz)
• Shipping Weight: Approx. 0.5 kg

Key Features

• High-accuracy shaft vibration and position measurement
• Rugged construction for harsh industrial environments
• Wide operating temperature range for extreme applications
• Fast response time for capturing dynamic machinery events
• Chemical-resistant PPS tip for longevity in contaminated oils or atmospheres
• MIL-STD certified for mechanical durability

Installation & Compatibility

• Designed for use with Bently Nevada 3300 XL monitor frames
• Mounts in standard 3/8-24 UNF threaded holes
• Requires proper gap setting and calibration with a compatible driver/conditioner
• Integral cable with connector for reliable signal transmission

Shipping Information

• 1x Proximity Probe (330101-00-14-10-02-CN)
• Typically includes protective tip cap
• Secure protective packaging
• Shipped via FedEx, UPS, or DHL

FAQ

• What does this probe measure?
  It measures the relative distance (gap) between the probe tip and a conductive metal surface, typically used for monitoring radial shaft vibration, axial position (thrust), and eccentricity.
• What is the standard target material?AISI 4140 steel is the standard calibration material. Performance varies with other materials; compensation may be required.
• Can the cable be repaired or extended?No, the cable is integral to the probe. Damaged cables typically require probe replacement. Use approved extension cables if needed.