IC670MDL330 16-Point AC Output Module | GE Fanuc

GE Fanuc IC670MDL330 Output Module

The IC670MDL330 is a versatile alternating current output module for industrial control. This GE Fanuc component provides 16 isolated switching points for AC loads. It integrates directly with Series 90-30 PLC systems for reliable actuator and device control.

Electrical Specifications

• Module Designation: IC670MDL330
• Standard Voltage: 12 to 120 Volts AC
• Functional Range: 10 to 132 Volts AC
• Current per Channel: 1.0 Ampere maximum
• Total Module Current: 4.0 Amperes maximum combined
• Surge Current: 10 Amps peak (20 milliseconds duration)
• Minimum Load Requirement: 10 milliamps per output point
• Forward Voltage Drop: 2.0 Volts maximum across the output
• Off-State Leakage: Less than 2 mA at 120 VAC

Performance and Protection Features

• Output Configuration: One bank of 16 output points
• Switching Speed: Responds within one-half AC cycle
• Isolation Test Voltage: Withstands 1500 VAC for one minute
• Continuous Isolation Rating: 250 Volts AC continuous operation
• Output Protection: Each point includes an integrated RC snubber circuit
• Fuse Protection: One user-replaceable 5A slow-blow fuse (5x20 mm)

Design and Operational Benefits

• Broad Voltage Compatibility: Operates with a wide range of AC voltages from 10 to 132 VAC.
• High-Density Control: Sixteen output points in a single module optimize cabinet space.
• Robust Electrical Protection: Integrated snubbers and a group fuse safeguard against transients and overloads.

Installation and Safety Guidelines

• Ensure the connected load per point does not exceed the 1.0 Amp rating.
• The total combined current for all 16 points must stay under 4.0 Amps.
• Verify the supply voltage remains within the 10-132 VAC operating window.
• Use the specified 5A slow-blow fuse for group protection; do not substitute.
• Observe all local electrical codes for wiring and enclosure safety.

Frequently Asked Questions

What is the maximum load I can connect to a single output?

Each output point can safely switch a load drawing up to 1.0 Ampere at the applied AC voltage.

How are the output points protected from electrical damage?

Each output has a built-in RC snubber, and the entire group is protected by a user-replaceable 5A slow-blow fuse.

What does the module's isolation rating mean?

It means the internal logic circuits are electrically isolated from the output AC power circuits, tested to withstand 1500 VAC for safety.