Transformeer je huis met de nieuwste multi-elektronica oplossingen, van intelligente verlichting tot spraakgestuurde apparaten, allemaal ontworpen om het leven gemakkelijker, veiliger en meer verbonden te maken.
SKU:6ES7350-1AH03-0AE0
SIEMENS 6ES7350-1AH03-0AE0 S7-300 Counter Module
Manufacturer: Siemens
Product No.: 6ES7350-1AH03-0AE0
Product Type: Counter Module
Product Origin: DE
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months
Delen
- Snelle levering
- 24/7 Ondersteuning
- Kwaliteitsborging
Beschrijving
SIEMENS 6ES7350-1AH03-0AE0 SIMATIC S7-300 FM 350-1 Counter Module
The SIEMENS 6ES7350-1AH03-0AE0, also cataloged as the FM 350-1 Counter Module, operates as a dedicated single-channel high-speed counter for S7-300 systems, processing incremental encoder signals up to 500 kHz over the backplane bus.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6ES7350-1AH03-0AE0 |
| Brand | SIEMENS |
| Product Type | FM 350-1 Counter Module |
| Series | SIMATIC S7-300 |
| Weight | 250 g (approx.) |
| Dimensions | 40 mm width x 125 mm height x 120 mm depth |
| Rated Supply Voltage | 24 VDC |
| Permissible Voltage Range | 20.4 V to 28.8 VDC (dynamic 18.5 V to 30.2 V) |
| Current from Load Voltage 1L+ | 40 mA max (without load) |
| Current from Backplane Bus | 160 mA max at 5 VDC |
| Power Loss | 4.5 W typ. |
| Counter Inputs | 1 channel, 32 bit or +/-31 bit |
| Counting Frequency | 500 kHz max (5 V), 200 kHz max (24 V) |
| 5 V Encoder Supply | 5.2 V +/-2%, 300 mA max |
| 24 V Encoder Supply | 1L+ (-3 V), 400 mA max |
| Digital Inputs | 3 (gate start, gate stop, counter set) |
| Digital Outputs | 2, short-circuit protected, 0.5 A rated |
| Front Connector | 1x 20-pin |
| Isolation | Tested at 500 V |
Counter Inputs and Encoder Interface
Single 32-bit counter channel accepts symmetrical incremental encoders with two pulse trains offset by 90 deg, asymmetrical incremental encoders, 24 V initiators, and 24 V directional elements with one pulse train and one direction level. The 5 V counter input uses RS 422 differential signaling with a 220 ohm terminating resistor and 1.3 V differential input voltage. The 24 V counter input accepts +11 V to +28.8 V for signal "1" and -28.8 V to +5 V for signal "0" at 9 mA typical input current, with a minimum pulse width of 2.5 us. Potential separation between channels and the backplane bus is provided by optocouplers on digital inputs, digital outputs, and the counter. Isochronous mode is supported for deterministic cycle-synchronized operation. A configuration package is included on CD.
Frequently Asked Questions
Q: What is the maximum counting frequency of the FM 350-1?
A: 500 kHz for the 5 V RS 422 differential input, and 200 kHz for the 24 V input.
Q: What is the weight and physical size of the 6ES7350-1AH03-0AE0?
A: Approximately 250 g, with dimensions of 40 mm width, 125 mm height, and 120 mm depth.
Q: What front connector does the module require?
A: One 20-pin front connector.
Field Installation Guidelines
Insert the module into an S7-300 rack and secure with the mounting screws. Wire the 20-pin front connector per the module pin assignment before energizing. Verify supply voltage at 1L+ and 2L+ is within 20.4 V to 28.8 VDC. Route encoder cables separate from high-current power conductors to preserve signal integrity at 500 kHz. Confirm the 5 V encoder supply load does not exceed 300 mA and the 24 V encoder supply load does not exceed 400 mA. Verify the encoder type and signal format match the configured counting mode before commissioning.
Aanvullende specificaties
Scalar (V/f)
Vector
Op netstroom
Koopgids
- Bevestig het exacte model, onderdeelnummer en specificaties voordat u bestelt.
- Zorg voor compatibiliteit met uw huidige machines of besturingssystemen.
- Neem contact op via sale@etowonauto.com of +8617859788089 voor technische ondersteuning.
- Bekijk de leveringsopties, doorlooptijden en verzendvereisten.
- Volg de instructies van de fabrikant en de beste praktijken tijdens de installatie.
Verzending en Retourneren
Voorraadartikelen worden doorgaans dezelfde werkdag verzonden. Voor producten die momenteel niet op voorraad zijn, kunnen de verzendtijden variëren afhankelijk van de beschikbaarheid. Internationale verzending is mogelijk, en de verzendkosten worden berekend op basis van bestemming, gewicht en gekozen vervoerder.
Retourzendingen worden geaccepteerd binnen 30 dagen na ontvangst, mits de artikelen ongebruikt en in originele staat zijn. De kosten voor retourzending zijn voor rekening van de klant. Neem alstublieft contact met ons op voordat u een artikel retourneert om een retourautorisatie te ontvangen.
Voor meer details kunt u onze Verzend- en Retourbeleid raadplegen.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Snelle verzending
Originele onderdelen voor industriële automatisering beschikbaar voor snelle verzending wereldwijd.
-
Eenvoudige Retourzendingen
30 dagen retourrecht met 12 maanden garantie voor betrouwbare nazorgbescherming.
-
24/7 ondersteuning
Responsieve professionele ondersteuning om stabiele en efficiënte bedrijfsvoering te behouden.
-
Echt & Origineel
100% authentiek, rechtstreeks afkomstig van vertrouwde fabrikanten van industriële automatisering.
Technische & Koopgids
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
-
What CFC Rules Cut PCS7 Batch Abort Rates Fast?
This article presents enforceable CFC programming governance rules for Siemens PCS7 DCS batch plants, covering b...
-
What Makes the 1769-L3ER Ideal for Compact Skid Automation?
This guide explains how the Allen-Bradley 1769 CompactLogix L3ER bridges the gap between micro PLCs and large DC...
-
Why Do SIL3 Safety Interlocks Still Trip in Industrial Plants?
This article reviews Honeywell Safety Manager SIL3 SIS architecture, wiring and cabinet installation rules, PFDa...
-
How Does Poor Grounding Cause 4-20mA Signal Drift?
This guide explains how MTL signal isolators fail through distortion, drift and EMI in PLC and DCS loops, then d...
