Delta VFD900CP43A-00 90kW AC Drive 460V Light Duty 180A

Delta VFD900CP43A-00 CP2000 Series Drive

The Delta VFD900CP43A-00 is a powerful industrial AC drive. It is part of the efficient CP2000 series. This model provides 125 HP (90 kW) output. It operates on 460V three-phase power. The drive features a built-in DC reactor for better power quality. It has a compact D frame design. This drive suits various industrial motor control applications.

Key Features and Benefits

• High Power Output: 125 HP (90 kW) for demanding motor control.
• Built-in DC Reactor: Reduces harmonics and improves power factor.
• Compact Design: D frame size saves valuable panel space.
• Dual Current Ratings: Supports both light duty (180A) and normal duty (150A) operation.
• Energy Efficient: CP2000 series designed for optimal energy savings.

Complete Technical Specifications

• Manufacturer: Delta
• Model: VFD900CP43A-00
• Series: CP2000
• Input Voltage: 460V - 3 Phase
• Rated Power: 125 HP (90 kW)
• Light Duty Current: 180 A
• Normal Duty Current: 150 A
• Frame Size: D
• IP Rating: IP00 (Open Frame)
• Built-in EMC Filter: No
• Built-in Braking Chopper: No
• Built-in DC Reactor: Yes
• Weight: 84.7 lbs (38.4 kg)
• Dimensions: 10.83" x 12.99" x 21.65" (275mm x 330mm x 550mm)
• Cooling Method: Forced air cooling
• Control Method: Advanced vector control technology
• Carrier Frequency: Adjustable range 1-16 kHz
• Efficiency: >97% typical
• Ambient Temperature: -10°C to 50°C (14°F to 122°F) for operation
• Storage Temperature: -20°C to 65°C (-4°F to 149°F)
• Humidity: 0-90% RH (non-condensing)
• Overload Capacity: 110% for 60 seconds (normal duty)
• Control Interface: Standard digital and analog I/O

Installation and Setup

• Mount in a clean, dry, well-ventilated enclosure (IP00 rating requires full enclosure protection).
• Maintain proper clearance for airflow around the drive.
• Use appropriate wire gauges for 150-180A current ratings.
• Install external EMC filter if required by application.
• Add external braking unit and resistor for dynamic braking needs.
• Ensure proper grounding according to electrical standards.

Typical Applications

• Centrifugal pumps and water supply systems.
• Industrial fans and air handling units.
• Conveyor systems and material handling equipment.
• Mixers and agitators in processing industries.
• HVAC systems in large buildings.

Frequently Asked Questions (FAQ)

Q: What is the difference between light duty and normal duty current ratings?

• A: Light duty (180A) allows higher current for lighter loads with frequent starts/stops. Normal duty (150A) is for continuous heavy loads with fewer start/stop cycles.

Q: Does this drive have built-in braking capability?

• A: No. You need to add an external braking chopper and resistor for applications requiring rapid deceleration or braking.

Q: Can this drive be used outdoors?

• A: No. With IP00 rating, it must be installed inside a protective enclosure that provides appropriate environmental protection.