Bently Nevada 330104-00-05-10-02-CN ClickLoc Probe 1m

Product Overview

The Bently Nevada 330104-00-05-10-02-CN is a 3300 XL 8 mm proximity probe with M10×1 thread and armor protection. Its 5 mm case and 1.0-metre ClickLoc cable suit compact turbine and compressor installations. The probe carries CN approval for hazardous areas and weighs approximately 0.16 kg (0.35 lb).

Ordering Code Breakdown

330104 – 3300 XL 8 mm Probe, M10 x 1 thread, with armor
00 – Unthreaded Length: 0 mm
05 – Overall Case Length: 5 mm
10 – Total Cable Length: 1.0 metre (3.3 ft)
02 – Connector: Miniature coaxial ClickLoc
CN – Agency Approval: Country specific (China)

Technical Specifications

Engineering Advantages

The 5 mm case fits shallow mounting bosses where standard probes will not seat. Three-layer cable shielding with 85% coverage rejects electromagnetic interference in noisy plants. The Viton O-ring seals 20 bar differential pressure for pressurized bearing housings. CN approval covers ATEX/IECEx hazardous area compliance. At roughly 0.16 kg, the probe adds minimal mass to the mounting point.

Technical FAQs

Q1: What does the CN suffix indicate?
A1: CN indicates country-specific ATEX/IECEx approval for hazardous areas.

Q2: What is the recommended gap setting?
A2: 1.27 mm ±0.1 mm using an AISI 4140 steel target.

Q3: What are the power and pressure ratings?
A3: -24 VDC at 12 mA with a Viton O-ring sealing 20 bar differential.