330910-00-13-10-02-00 Bently Nevada Probe

Product Overview

The Bently Nevada 330910-00-13-10-02-00 is a high-precision 3300 NSv proximity probe designed for radial vibration and axial position measurements in restricted spaces. It is specifically engineered for centrifugal and reciprocating compressors where mounting space is limited.

This probe features enhanced chemical resistance and superior side-view suppression. It is 100% interchangeable with legacy 3300 RAM proximity probes, ensuring a reliable solution for critical machinery monitoring and protection.

Technical Configuration

• Model: 330910 (3300 NSv Probe, M10X1 thread, with armor)
• Unthreaded Length: 0 mm
• Overall Case Length: 130 mm
• Total Length: 1.0 meter (39 in)
• Connector Type: Miniature coaxial ClickLoc
• Agency Approval: Not required

Technical Specifications

Installation Guide

Gap Setting

Set the installation gap to 1.0 mm (40 mils), which typically outputs -9 Vdc. This ensures the probe operates within the optimal linear range.

Torque Specifications

Recommended torque for M10X1 cases is 11.3 N·m (100 in·lb). Do not exceed the maximum rated 33.9 N·m to avoid sensor case damage.

Cable Handling

Maintain a minimum bend radius of 25.4 mm (1.0 in) for the armored cable to protect the internal coaxial structure and ensure signal integrity.

Engineering Advantages

The 3300 NSv series excels in "Narrow System" targets. Its PPS tip resists corrosive fluids, and its advanced side-view characteristics eliminate interference from surrounding metal, providing clean vibration data for critical TSI systems.

Technical FAQs

Q1: How to verify probe health?

A1: Resistance for this 1.0m probe must be 4.2 ± 0.5 Ω between the center conductor and shield.

Q2: Is it compatible with 3300 RAM?

A2: Yes, it is electrically and mechanically interchangeable with previous 3300 RAM series probes.

Q3: Required Proximitor?

A3: Must be used with a 3300 XL NSv Proximitor for accurate 200 mV/mil scaling.