Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
  • 330101-00-28-90-02-00
  • 330101-00-28-90-02-00-1
  • 330101-00-28-90-02-00-2
1 3

330101-00-28-90-02-00

Original Bently Nevada 330101-00-28-90-02-00 8mm Probe

A kan haja (21 guda), a shirye don aikawa

  • Manufacturer: Bently Nevada

  • Product No.: 330101-00-28-90-02-00

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 450g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

Product Overview

The Bently Nevada 330101-00-28-90-02-00 is a high-performance 3300 XL Series 8 mm eddy current proximity probe designed for continuous shaft vibration, thrust position, and speed monitoring in critical machinery. Featuring a 3/8-24 UNF fully-threaded body with 0.0 inches unthreaded length and a 2.8-inch (71 mm) overall case length, this sensor is built with an integrated 9.0-meter (29.5 feet) standard coaxial cable terminated with a miniature coaxial ClickLoc™ connector and connector protector. Manufactured with an impact-resistant Polyphenylene sulfide (PPS) tip, TipLoc™ tip-molding, CableLoc™ 330 N cable retention, and an AISI 304 stainless steel case, the assembly has an approximate net hardware weight of 0.45 kg (0.99 lbs). It operates reliably across severe temperature conditions from -51°C to +177°C (-60°F to +351°F) and provides full interchangeability without individual system recalibration.

Technical Specifications

Parameter Specification Details
Manufacturer Bently Nevada
Part Number 330101-00-28-90-02-00
Product Line 3300 XL 8 mm Proximity Transducer System
Thread & Casing Dimensions 3/8-24 UNF thread / 0.0 in unthreaded / 2.8 in overall case length
Total Cable Length 9.0 meters (29.5 feet) nominal
Connector & Approval Profile Miniature coaxial ClickLoc™ connector with protector / No agency approvals
Linear Range & Scale Factor 2.0 mm (80 mils) linear range / 7.87 V/mm (200 mV/mil) ISF
Recommended Target Gap 1.0 mm (40 mils) corresponding to -10 Vdc bias output
Probe DC Resistance 12.6 Ω ± 0.8 Ω (Center to outer conductor for 9.0m cable)
Cable Capacitance & Construction 69.9 pF/m typical / FEP insulated 75 Ω coaxial cable
Operating Temperature Range -51°C to +177°C (-60°F to +351°F)
Component Net Weight Approx. 0.45 kg (0.99 lbs)

Installation & Torque Guidelines

Mechanical Installation: Thread the probe into a tapped 3/8-24 UNF housing opening. Apply the recommended installation torque of 7.3 N•m (65 in•lb), taking care not to exceed the maximum rated torque limit of 12.5 N•m (110 in•lb). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal coaxial conductor fatigue.
Gap Calibration & Connection: Set the initial probe gap to 1.0 mm (40 mils) from the shaft target to establish the nominal -10 Vdc voltage center point. Fasten the ClickLoc connector finger-tight (do not exceed 0.56 N•m / 5 in•lb) and secure the protective sleeve to prevent environmental corrosion and mechanical disengagement.

Technical FAQs

Q1: What does the -90- option code signify in the part number?

A1: The "90" code indicates a 9.0-meter (29.5 feet) total length configuration, allowing direct connection to a 9.0m 3300 XL Proximitor Sensor without an extension cable.

Q2: What is the recommended gap distance for setting probe bias voltage?

A2: The recommended gap is 1.0 mm (40 mils), which yields an approximate -10 Vdc output centered in the 2.0 mm (80 mil) linear operating range.

Q3: What is the maximum field wiring length supported back to the monitoring rack?

A3: Field wiring using 3-conductor shielded triad cable can extend up to 305 meters (1,000 feet) between the 3300 XL Proximitor sensor and the monitor rack.

Commercial Contact Email: sale@etowonauto.com

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Proximity Probe

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog