Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
1 3

IC697HSC700

IC697HSC700 GE Fanuc Series 90-70 High-Speed Counter Module

A kan haja (21 guda), a shirye don aikawa

  • Manufacturer: General Electric

  • Product No.: IC697HSC700

  • Product Type: High-Speed Counte Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 220g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

Product Overview

The GE Fanuc IC697HSC700 is a high-performance, single-slot High-Speed Counter (HSC) module designed for the Series 90-70 PLC system. Engineered for real-time motion control, turbine pulse monitoring, and high-speed material handling, it processes input pulse frequencies up to 200 kHz (or up to 800 kHz in Type E Quadrature x4 mode). Featuring 4 integrated positive logic outputs with short-circuit protection, the IC697HSC700 provides rapid direct output response independent of PLC scan times. Weighing approximately 0.22 kg (0.49 lbs), it offers high-density counting performance in a lightweight module footprint.

Technical Specifications

Parameter Specification
Product Model IC697HSC700
PLC Compatibility GE Fanuc Series 90-70 System
Maximum Input Frequency 200 kHz (Types A/D) / 800 kHz (Type E Quad B x4 Mode)
Input Voltage Levels 5 VDC TTL or 10–30 VDC Differential / Single-Ended
Output Channels 4 Positive Logic (Sourcing) Outputs
Output Voltage & Current 10–30 VDC @ up to 20 mA per channel
Backplane Current Draw 0.8 A @ 5 VDC (from PLC backplane)
Output Protection Electronic Short-Circuit & Overcurrent Protection
Operating Temperature 0°C to 60°C (32°F to 140°F)
Net Weight 0.22 kg (0.49 lbs)

Key Design & Hardware Features

  • High-Speed Pulse Input Processing: Accurately tracks high-speed encoder feedback up to 200 kHz for precise position, velocity, and length measurement.
  • Direct Onboard Outputs: Includes 4 fast-responding outputs that trigger based on pre-set counter match values, bypassing PLC CPU scan delay.
  • Flexible Signal Modes: Configurable for multiple counting modes, including Up/Down counting, Pulse/Direction, and Quadrature A/B encoder inputs.
  • Built-In Circuit Diagnostics: Integrated short-circuit protection and front-panel status LEDs enable visual diagnostic feedback during commissioning.

Installation & Engineering Guidelines

1. Encoder Signal Selection: Select the correct input jumpers or field wiring connections depending on whether your rotary encoder provides 5 VDC differential signals or 10–30 VDC single-ended signals.

2. Shielding & Cable Grounding: Always use twisted-pair shielded cables for high-speed input signals and ground the shield at the module terminal block to suppress high-frequency electrical noise.

3. External Field Power: Connect an external 10–30 VDC power supply to the module terminal block to energize the onboard positive logic output channels.

Frequently Asked Questions (FAQs)

Q1: Can the IC693 series PLCs use the IC697HSC700 module?
A1: No. The IC697HSC700 is specifically designed for the GE Fanuc Series 90-70 backplane and is not physically or electrically compatible with Series 90-30 racks.

Q2: What is the maximum counting frequency supported by the IC697HSC700?
A2: The module supports standard input pulse rates up to 200 kHz, which translates to an effective 800 kHz count rate when configured in Quadrature x4 mode.

Q3: How do the onboard outputs operate relative to the PLC scan cycle?
A3: The 4 onboard outputs operate asynchronously to the CPU scan. They trigger instantly when internal counter registers reach target setpoints, providing millisecond-level response times.

🏷️ Tags: High-Speed Counte Module

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog