Katin haɗin bas ɗin ISA 8-bit IC693PIF300 GE Fanuc, 1Mbps

Taƙaitaccen Bayanin Samfur

GE Fanuc IC693PIF300 katin PC Interface ne na musamman da aka ƙera don cike gibin sadarwa tsakanin kwamfutocin masana’antu da tsarin Series 90-30 PLC. Tare da tsohuwar fasahar ISA 8-bit bus, wannan kati yana ba da damar musayar bayanai cikin sauri da sa ido a ainihin lokaci kai tsaye daga PC backplane. Yana da nauyin kusan 0.28 kg, wannan ƙaramin kati muhimmin sashi ne don haɗa tsofaffin tsarin masana’antu da kuma samun bayanan masana’antu (industrial data acquisition).

Sadarwar Bayanai Mai Saurin Gaske

Injin Ginuwar ISA Bus Mai Inganci

IC693PIF300 yana aiki a kan ISA bus mai 8-bit, yana samar da ingantaccen hanyar sadarwa da saurin da zai iya kaiwa har zuwa 1 Mbps. Yana sarrafa girman tubalin bayanai na 1280 Bytes, wanda ke tabbatar da cewa rikodin PLC masu rikitarwa da yanayin I/O suna daidaituwa da PC ɗin mai masauki cikin cikakken daidaito (± 0.5%). Duk da ginin sa mai nauyin 0.28 kg kawai, an gina katin ne don aiki ba tare da yankewa ba a muhallan da zafin jiki yake tsakanin 0°C zuwa 55°C.

Faɗaɗɗen Zango na Haɗin Sadarwa

An ƙera wannan katin interface ne don ya dace da nau’o’in tsari na masana’antu daban-daban, yana tallafawa mafi girman tazarar sadarwa na 213 m (700 ft) idan aka yi amfani da igiyoyi masu inganci. Wannan yana ba da damar a sanya PC ɗin mai masauki a ɗakin kula (control room) mai nisa da ainihin rack ɗin PLC da ke bene na masana’anta. Ana ɗaukar wutar lantarki 5 V DC da ake buƙata don katin kai tsaye daga ramin ISA na PC, wanda ke sauƙaƙa buƙatun wutar waje.

Ƙayyadaddun Fasaha

Jagorar Shigarwa & Haɗawa

An ƙera IC693PIF300 ne don sauƙaƙan shigarwa ta jiki. Kafin ka fara, tabbatar an kashe PC ɗin mai masauki. Saka katin a cikin kowane ISA 8-bit slot da ke samuwa sannan ka matse bracket ɗin da dunƙulen da aka bayar. Ana kafa haɗin zuwa rack ɗin Series 90-30 PLC ta hanyar igiyar 25-pin D-shell na daidaitaccen salo. Da zarar an kulle komai, kunna PC ɗin domin farawa da haɗin, sannan a fara watsawar bayanai tsakanin kwamfuta da tsarin sarrafa masana’antu.

Amincin Aiki

Tare da nauyin 0.28 kg kawai, IC693PIF300 mafita ce mai sauƙin ɗauka amma mai ƙarfi ga sadarwar masana’antu. Ana yawan amfani da shi a aikace-aikacen SCADA, haɓaka HMI na musamman, da ayyukan gano matsala na zurfi. Daidaiton sa na ± 0.5% yana tabbatar da cewa bayanan da ake gani a fuskar PC suna nuna ainihin yanayin I/O na na’urar jiki, yana kiyaye matakin inganci mai tsauri da ake buƙata a gine-ginen sarrafa kansa na GE Fanuc.

Tambayoyi na Fasaha (FAQs)

Q1: Shin wannan kati yana aiki da ramin PCI ko PCIe na zamani?
A1: A’a, IC697PIF300 kati ne mai dogaro da ISA. Yana buƙatar industrial motherboard ko tsohuwar PC da ke musamman da ramin faɗaɗa ISA 8-bit ko 16-bit.

Q2: Me ke cikin daidaitaccen jerin abubuwan da ake turowa a cikin akwati?
A2: Akwati yawanci yana ƙunshe da katin interface IC693PIF300, jagorar mai amfani, igiyar interface 25-pin D-shell, da dunƙulen ɗaurewa da ake buƙata.

Q3: Shin nauyin 0.28 kg ya haɗa da igiyar 25-pin?
A3: 0.28 kg yana nufin nauyin katin interface kaɗai. Igiyar 25-pin D-shell mai ƙarfi za ta ƙara wani nauyi ga jimillar nauyin da za a tura.