Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
  • IC755ACC12GAS
1 3

IC755ACC12GAS

GE Fanuc IC755ACC12GAS Sealing Gasket and Brackets

Ragowar raka'a 7 kaɗai

  • Manufacturer: General Electric

  • Product No.: IC755ACC12GAS

  • Product Type: Operator Interface

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 1360g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

Product Overview

The GE Fanuc IC755ACC12GAS is a replacement sealing gasket and mounting kit designed for 12-inch QuickPanel+ operator interface terminals. Manufactured for GE Fanuc / Emerson automation systems, this kit ensures an environmental seal between the HMI bezel and panel cutout, maintaining IP/NEMA protection ratings while securing the display unit to various mounting surfaces.

Core Features

  • Environmental Protection: Creates a tight barrier against airborne contaminants and moisture to safeguard internal HMI electronics.
  • Complete Mounting Hardware: Includes dedicated mounting clips and brackets for uniform clamping pressure around the panel cutout.
  • Natural Convection Compatible: Maintains structural seal integrity under natural convection cooling environments up to 50°C.
  • Field Replacement Accessory: Designed as a direct OEM replacement for worn or degraded original panel seals during system retrofits.

Technical Specifications

Parameter Data
Part Number IC755ACC12GAS
Product Line GE QuickPanel+ Series (Emerson Automation)
Target Compatibility 12-inch QuickPanel+ Operator Interface Modules
Accessory Type Replacement Gasket & Mounting Kit
Recommended Torque 0.3 N·m to 0.5 N·m (2.6 to 4.4 in·lbs)
Required Installation Tool Standard Phillips head screwdriver
Operating Temperature 0°C to +50°C (32°F to 122°F)
Humidity Resistance 85% RH (non-condensing) @ 30°C
Kit Net Weight 1.36 kg (3.00 lbs)

Engineering & Installation Guide

  • Preparation: Disconnect all power inputs and field wiring before attempting to seat or remove the QuickPanel+ module from the enclosure cutout.
  • Cutout Alignment: Ensure the panel cutout precisely matches the 12-inch unit dimensions to avoid localized over-compression or uneven gaps along the gasket edge.
  • Torque Control: Tighten mounting clips using a Phillips screwdriver to 0.3–0.5 N·m. Avoid over-torquing to prevent gasket deformation and mounting clip fracture.
  • Maintenance Tip: Replace the gasket whenever the HMI terminal is relocated or re-installed in a new panel cutout to guarantee full environmental sealing.

Technical FAQs

Q1: What display size is the IC755ACC12GAS gasket designed for?
A1: It is engineered specifically for 12-inch GE Fanuc / Emerson QuickPanel+ HMI units.

Q2: What torque should be applied when securing the mounting clips?
A2: Tighten the mounting clamps to a recommended torque of 0.3 N·m to 0.5 N·m using a Phillips screwdriver.

Q3: When should the IC755ACC12GAS gasket be replaced?
A3: Replace the gasket whenever installing the panel in a new location or after frequent removals, as compression fatigue degrades sealing capability over time.

Product Resources

📄 Download PDF
🏷️ Tags: HMI Panel Operator Interface
  • Goge

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog