Bently Nevada 330130-070-02-00 | Igiyoyin Tsawo na Proximity

Bayani Kan Samfurin

Bently Nevada 330130-070-02-00 igiyar faɗaɗa kusanci ce mai ƙarfin aiki ta jerin 3300 XL wadda aka ƙera a Amurka don ingantattun hanyoyin kariyar injuna. Tana da tsawon daidaitacce na mita 7.0 (ƙafa 22.9), wannan igiyar mai inganci tana haɗa muhimman layukan sadarwa tsakanin na'urorin binciken kusanci na 8 mm da na'urorin Proximitor Sensors na daidaitaccen iri. Wannan tsari yana ƙunshe da masu kare haɗin gwiwa na matakin soja da aka haɗa, waɗanda aka tsara don tabbatar da tsaron haɗin gwiwar haɗa-coupling daga nau'ikan ɗaukar nauyin inji da lahani na bugawa. An ƙera ta don sarrafa bayanan eddy current masu sauƙi a manyan mitoci, tana kiyaye daidaiton impedance sosai domin isar da bayanan tazara (gap), mataki (phase), da rawar shaft ba tare da karkatarwa ba daga manyan injuna masu juyawa.

Muhimman Fa'idodin Fasaha

Iyakokin Juriya na DC da Aka Daidaita

Domin kiyaye cikakkiyar daidaiton calibration a cikin kewayon kusanci, an sarrafa juriya ta zuciyar igiya ta mita 7.0 (RCORE) sosai a 1.54 ± 0.23 Ω. Juriya ta mai rufin jaket ɗinsa (RJACKET) kuma ana kiyaye ta a cikin 0.46 ± 0.09 Ω, wanda ke rage raunin sigina marar so.

Tsarin Rufi na Cibiyar Low-Capacitance

Tare da ƙarfin capacitance na al'ada na 69.9 pF/mita (21.3 pF/ƙafa), igiyar tana rage raguwar sigina a kan dogayen layuka. Wannan ƙirar low-capacitance tana taimakawa wajen kiyaye tsabtataccen martanin siginar dynamic mai ƙarfi a manyan mitoci, wanda ya sa ta dace da tsarin sa ido na injinan turbin na masana'antu masu sauri.

Haɗaɗɗun Majalisun Kariyar Inji

Zaɓi na 02 yana zuwa a daidaitaccen tsari tare da masu kare haɗin gwiwa masu ƙarfi da aka riga aka daidaita su waɗanda ke rufe haɗin plug da jack. Wannan tsarin yana kare zoben tasha masu rauni daga girgizar ƙarfi, bugun kayan aiki, da sauye-sauyen tsarin gini da ke faruwa yayin ayyukan yau da kullum na masana'anta.

Ƙayyadaddun Fasaha

Shigarwa da Kula da Na'ura

Ka'idojin Kafawa na Mai Kare Haɗin Gwiwa (Connector Protector Deployment Guidelines)

Lokacin kulle haɗin coaxial a wurin, ku tabbatar kun ja murfin kariyar mai haɗa na inji ya rufe dukan gefen da aka haɗa. Duk da yake kowace akwati tana ƙunshe da tef na silicone mai zaman kanta, ku guji amfani da shi a matsayin babban rufewa idan wurin “loop” ɗin yana ci gaba da fuskantar man turbine na roba (synthetic turbine oils).

Takunkumin Jimillar Tsawon Tsarin

Da'irar kusanci ta 3300 XL tana buƙatar daidaitaccen daidaitawa (calibration) bisa ga jimillar tsawon lantarki na kayan aiki (yawanci jimillar mita 5 ko 9). Ku haɗa wannan kebul na tsawo na mita 7.0 kawai da “probes” da kuma kayan Proximitor da aka daidaita don aiki da layi mai tsawon mita 7.

Bukatuwar Wutar Aiki a Fage

Cikakken tsarin “loop” na buƙatar wutan wadata mai tsabta tsakanin -17.5 Vdc da -26 Vdc. Idan an saka kariyar tsaro (safety barriers), ku tabbatar wutan shigarwa yana tsakanin -23 Vdc zuwa -26 Vdc. Aiki da “active loop” sama da -23.5 Vdc zai rage daidaiton kewayon bin diddigin layi na 2 mm.

Fa'idodin Injiniya

Tsarin Gina da Aka Kera da Haƙƙin Mallaka

Wannan ƙarnin kebul na amfana kai tsaye daga sabbin ƙirƙire-ƙirƙiren Bently Nevada, yana haɗuwa da tsarin da ke amfani da gyaran TipLoc da kuma matattarar tsakiya mai ƙarfi ta CableLoc domin tallafa wa iyakar tsaron jan ƙarfi na injina har zuwa 330 N (75 lbf).

Ƙaramin Sauyin Fita Idan Wutar Wadata Ta Canja

Makarar kusanci (proximity loop) tana nuna ƙasa da 2 mV na jimillar bambancin fitarwa ga kowane volt na canjin wutan wadata. Wannan tacewar sigina tana kiyaye bayanan kusanci suna tsabta kuma a ware daga rawar ƙarfin wutar DC a layukan wutar panel ɗinku.

Dorewar Muhalli na Dogon Lokaci

An gwada shi a ƙarƙashin ƙa'idodin muhalli masu tsauri na IEC 68-2-3 har tsawon kwanaki 56, kuma tsarin haɗa sassan jikinsa yana hana shigar danshi a hankali, yana tabbatar da cewa matsakaicin “scale factor” ba ya sauyawa sama da 3% a ɗakunan sarrafa kaya masu ɗumi da yawan danshi.

Tambayoyi da Amsoshi na Fasaha

Q1: Zan iya neman takardar shaidar Asalin Kasa (Certificate of Origin, COO) a hukumance don nau'in 330130-070-02-00?

A1: I, za a iya. Tunda wannan kayan yana da cikakken ƙira da kera shi a Amurka (USA), za a iya shirya takardar shaidar Asalin Kasa (Certificate of Origin, COO) a hukumance a ba ku idan kuka nema ta hanyar sashen tallace-tallacen kasuwanci lokacin aiwatar da odar.

Q2: Me ya sa ba a bada shawarar tef na silicone don rufe haɗe-haɗe kusa da turbines?

A2: Man turbine na yau da kullum na iya sa tef na silicone na al'ada ya yi laushi ko ya narke a hankali idan ya daɗe a jikinsa. A wuraren da man turbine ke taruwa, ya zama dole a yi amfani da murfin mai haɗa na inji ko bututun kariya da ba sa barin ruwa/taruwar ruwa su shiga maimakon dogaro da tef na silicone.

Q3: Shin wannan layin kebul yana zuwa da kariyar murfin sulke a waje?

A3: A'a, nau'in 330130-070-02-00 kebul ne na tsawo na yau da kullum ba tare da sulke ba, nauyinsa 34 g/m. Idan sararin aiki ɗinku yana buƙatar murfin kariya na ƙarfen wanka (steel braid armor), ku fayyace cewa kuna buƙatar nau'in samfuri mai sulke.

Imel na Tuntuɓar Kasuwanci: sale@etowonauto.com