Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
  • 330104-00-02-20-01-00
  • 330104-00-02-20-01-00-1
  • 330104-00-02-20-01-00-2
1 3

330104-00-02-20-01-00

Bently Nevada 330104-00-02-20-01-00 8mm Probe

A kan haja (23 guda), a shirye don aikawa

  • Manufacturer: Bently Nevada

  • Product No.: 330104-00-02-20-01-00

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 250g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

Product Overview

The Bently Nevada 330104-00-02-20-01-00 is a 3300 XL 8 mm proximity probe with M10×1 thread and armor protection. Its 20 mm case and 2.0-metre cable handle turbine and compressor monitoring where longer cable runs are needed. The probe weighs approximately 0.25 kg (0.55 lb).

Ordering Code Breakdown

330104 – 3300 XL 8 mm Probe, M10 x 1 thread, with armor
00 – Unthreaded Length: 0 mm
02 – Overall Case Length: 20 mm
20 – Total Cable Length: 2.0 metres (6.6 ft)
01 – Connector: Miniature coaxial ClickLoc with connector protector, standard cable
00 – Agency Approval: Not required

Technical Specifications

Manufacturer Bently Nevada
Part Number 330104-00-02-20-01-00
Thread Type M10 × 1
Armor Yes
Overall Case Length 20 mm
Total Cable Length 2.0 m (6.6 ft)
Connector Type Miniature coaxial ClickLoc with protector
Probe DC Resistance 7.88 ± 0.50 Ω
Proximitor Supply -17.5 Vdc to -26 Vdc, 12 mA max
Supply Sensitivity < 2 mV per volt change
Output Resistance 50 Ω
Recommended Gap 1.27 mm (50 mils)
Tip Material Polyphenylene sulfide (PPS)
Case Material AISI 303 or 304 stainless steel
Pressure Seal Viton O-ring
Calibration Temperature +18°C to +27°C (+64°F to +80°F)
Weight 0.25 kg (0.55 lb) approx.
Country of Origin U.S.A.

Engineering Advantages

The 2.0-metre cable supports remote mounting without extension cables, reducing connection points and potential failure sites. The ClickLoc connector protector shields the interface from mechanical damage during installation. Armored M10×1 housing resists abrasion in high-vibration areas. At roughly 0.25 kg, the probe adds minimal mass to the mounting point.

Technical FAQs

Q1: What is the probe DC resistance?
A1: 7.88 ± 0.50 Ω for the 2.0-metre probe length.

Q2: What is the recommended gap setting?
A2: 1.27 mm (50 mils) using an AISI 4140 steel target.

Q3: What connector type does this probe use?
A3: Miniature coaxial ClickLoc with connector protector and standard cable.

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Proximity Probe

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog