Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
1 3

3ADT314100R1001

ABB SDCS-PIN-4 3ADT314100R1001 Power Interface Module 4A

A kan haja (11 guda), a shirye don aikawa

  • Manufacturer: ABB

  • Product No.: 3ADT314100R1001

  • Product Type: Interface Board

  • Product Origin: Sweden

  • Payment:T/T, Western Union

  • Weight: 910g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

ABB SDCS-PIN-4 3ADT314100R1001 Power Interface Module

ABB SDCS-PIN-4 3ADT314100R1001 is a power interface module with 3 x 400V AC input and 0-400V DC output. Delivers 4A output current with open-loop or closed-loop control modes. Features RS-485 communication interface for flexible integration. Weight: 0.91 kg (2.0 lbs).

Technical Specifications

Parameter Specification
Manufacturer ABB
Model SDCS-PIN-4 3ADT314100R1001
Product Type Power Interface Module
Input Voltage 3 x 400V AC, ±10%
Output Voltage 0-400V DC
Output Current 4A
Frequency 50/60 Hz
Control Mode Open-loop or closed-loop
Communication Interface RS-485
Weight 0.91 kg (2.0 lbs)

Key Features

  • 3 x 400V AC input with ±10% tolerance
  • Adjustable 0-400V DC output
  • 4A continuous output current capacity
  • Selectable open-loop or closed-loop control
  • RS-485 communication for remote monitoring and control
  • Compact design for panel installation
  • Wide frequency support 50/60 Hz

Applications

  • Material handling systems
  • Robotics and automation
  • Machine tools
  • Packaging machinery
  • Printing machinery
  • Conveyor systems
  • HVAC systems

Installation Guidelines (Field Engineer Notes)

Power Wiring: Connect 3-phase 400V AC input to L1, L2, L3 terminals. Use 2.5 mm² minimum wire gauge. Torque terminals to 0.8 N·m. Verify phase rotation before energizing.

Control Mode Selection: For open-loop operation, DIP switch 1 must be OFF. For closed-loop, switch 1 ON and connect external feedback signal to terminals 5-6. Do not change mode while powered.

RS-485 Wiring: Use shielded twisted pair cable. Connect A to terminal 8, B to terminal 9. Ground the shield at the master device only. Terminate last device on the network with 120Ω resistor.

Output Protection: Install an external fast-acting fuse (4A, 500V DC rated) in series with the output. The module does not have internal output short-circuit protection.

FAQs

Q1. Can I run this module on single-phase input?
A1. No. The SDCS-PIN-4 3ADT314100R1001 requires 3-phase 400V AC input. Running on single-phase will cause unstable output and may damage the internal rectifier.

Q2. What wire gauge for RS-485 communication?
A2. Use 22-24 AWG shielded twisted pair. Maximum cable length is 1200 meters. Terminate both ends with 120Ω resistors for longer runs to prevent signal reflection.

Q3. How do I reset the module after an overcurrent fault?
A3. Cycle input power off for 10 seconds, then re-energize. Check load for shorts before restart. The module does not have a front-panel reset button.

🏷️ Tags: ABB Interface Board

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog