Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
1 3

6ES7432-1HF00-0AB0

6ES7432-1HF00-0AB0 Siemens S7-400 SM 432 Module

A kan haja (12 guda), a shirye don aikawa

  • Manufacturer: Siemens

  • Product No.: 6ES7432-1HF00-0AB0

  • Product Type: Analog Output Module

  • Product Origin: DE

  • Payment:T/T, Western Union

  • Weight: 650g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

SIEMENS 6ES7432-1HF00-0AB0 SIMATIC S7-400 SM 432 Analog Output Module

The SIEMENS 6ES7432-1HF00-0AB0, also cataloged as the SM 432 Analog Output Module, operates as an isolated 8-channel output module with 13-bit resolution and voltage/current output ranges within SIMATIC S7-400 platforms.

Hardware Specifications

Parameter Specification
Model 6ES7432-1HF00-0AB0
Brand Siemens
Product Type SM 432 Analog Output Module
Series SIMATIC S7-400
Rated Load Voltage 24 VDC
Reverse Polarity Protection Yes
Current from L+ 200 mA max (no load), 400 mA max (rated load)
Current from Backplane Bus 150 mA max at 5 VDC
Power Loss 9 W typ.
Analog Outputs 8
Resolution 13 bit including sign
Conversion Time 420 us per channel; 300 us in all ranges
Voltage Ranges 0 to 10 V, 1 to 5 V, -10 V to +10 V
Current Ranges 0 to 20 mA, -20 mA to +20 mA, 4 to 20 mA
Load Impedance (Voltage) Min 1 kohm; capacitive load max 1 uF
Load Impedance (Current) Max 500 ohm; 600 ohm with common-mode voltage below 1 V
Shielded Cable Length Max 200 m
Dimensions (W x H x D) 25 mm x 290 mm x 210 mm
Weight 650 g (approx.)

Output Ranges and Isolation Characteristics

Unit weight is approximately 650 g with dimensions of 25 mm width, 290 mm height, and 210 mm depth. The SM 432 provides 8 isolated analog outputs with 13-bit resolution including sign. Voltage output ranges are 0 to 10 V, 1 to 5 V, and -10 V to +10 V; current output ranges are 0 to 20 mA, -20 mA to +20 mA, and 4 to 20 mA. Voltage outputs are short-circuit protected with a maximum short-circuit current of 30 mA. Current outputs present a maximum no-load voltage of 19 V. Conversion time is 420 us per channel, with 300 us in all ranges. Settling time is 0.1 ms for resistive load, 3.5 ms for capacitive load, and 0.5 ms for inductive load. Operational error limit over the full temperature range is +/-0.5% for voltage and +/-1% for current. Basic error limit at 25 deg C is +/-0.5% for both voltage and current. Potential separation exists between the channels and the backplane bus, and between the channels and load voltage L+, but not between individual channels. Isolation is tested at 2120 VDC between bus and L+/M. No diagnostics function is provided.

Frequently Asked Questions

Q: What is the weight and physical size of the 6ES7432-1HF00-0AB0?
A: Approximately 650 g, with dimensions of 25 mm width, 290 mm height, and 210 mm depth.

Q: Are the analog output channels isolated from each other?
A: No. Potential separation is provided between the channels and the backplane bus and between the channels and load voltage L+, but not between individual channels.

Q: What load impedance does the module support for current and voltage outputs?
A: Voltage outputs require a minimum of 1 kohm with capacitive load up to 1 uF. Current outputs support a maximum of 500 ohm, or 600 ohm when common-mode voltage is reduced below 1 V.

Field Installation Guidelines

Insert the module into the S7-400 rack and secure the mounting screws. Verify 24 VDC load voltage polarity before energizing; reverse polarity protection is provided. Route shielded analog output cables to a maximum of 200 m, with the shield grounded at one end. Confirm load impedance for voltage outputs is at least 1 kohm and for current outputs does not exceed 500 ohm. Verify conversion time and settling time against the loop response requirements before commissioning. Confirm isolation ratings against the field circuit potential before wiring.

Product Resources

📄 Download PDF
🏷️ Tags: Analog Output Module Siemens

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog