330101-00-30-10-02-CN Bently Nevada firikwensin girgiza

Bayani Kan Samfurin

Bently Nevada 330101-00-30-10-02-CN bincike ne mai ƙarfi na kusanci 3300 XL 8 mm da aka ƙera don kare injuna masu mahimmanci, nazarin kaurin fim ɗin mai, da sa ido kan girgizar shaft. An kera shi a U.S.A., wannan na’urar auna eddy current tana da madaidaicin zaren 3/8-24 UNF na rabin inci, an tsara ta gaba ɗaya ba tare da sulke mai kariya ba. An ƙera ta da sashe mara zaren na inci 00 da tsawon akwati gaba ɗaya na inci 3.0, tana zuwa da haɗaɗɗen kebul coaxial na tsawon 1.0 meter (ƙafa 3.3) da aka gama da ƙaramin mahaɗin coaxial na ClickLoc ba tare da mai kare mahaɗi ba. Tare da takaddun amincewar hukumomi na ƙasashe daban-daban (zaɓin -CN), wannan ƙarfaffiyar na’urar firikwensin tana da nauyin jigilar kaya na kusan 0.23 kg (0.51 lbs) bisa tsarin ta mara sulke. Dandamalin 3300 XL 8 mm an inganta shi ne don shigarwa na masana’antu da ke buƙatar ƙarfin akwati na sama da talakawa da kuma rufewa mai kauri domin karewa daga lalacewar jiki a cikin injinan turbin tururi, turbin gas, compressors, da famfuna.

Manyan Fa’idodin Fasaha

Injiniyancin TipLoc™ da CableLoc™ mai lasisi

Wannan binciken yana amfani da tsarin gyaran TipLoc mai lasisi wanda ke tabbatar da ɗaurewa mara karyewa tsakanin tip na Polyphenylene Sulfide (PPS) da akwati na bakin karfe. Haɗe da cigaban tsarin ɗaure CableLoc, haɗin kebul yana jure ja har zuwa 330 N (75 lbf) na ƙarfin ja domin hana fitowar kebul yayin shigarwa a yanayin aiki mai tsanani.

Ƙashin Bincike mai ƙarfi na 8 mm

Ta hanyar samun kauri mai yawa na rufaffen kewayen coil ɗin binciken a cikin tip na filastik PPS da aka narka, tsarin jiki na 8 mm yana ba da ƙarin juriya ga bugun inji. Ƙarfaffen akwati na bakin karfe AISI 303/304 yana ba da ƙarfin tsari na ƙarshe kan lalacewar jiki idan aka kwatanta da ƙananan salo na 5 mm.

Ƙwararren Juriya ga Danshi da Muhalli

An gwada shi bisa ga ƙa’idar IEC 68-2-3, binciken 3300 XL yana nuna ƙasa da canji 3% a Matsakaicin Sikelin Factor (ASF) ko da lokacin da aka fallasa shi ga 93% zafin danshi na dangi har tsawon kwanaki 56. Wannan yana tabbatar da daidaitattun siginar wuta marasa karkacewa a muhallin masana’antu masu rigar ruwa ko masu cike da danshi.

Ƙayyadaddun Fasaha

Shigarwa da Kula

Daidaita Gibin Injin da Matsayi

Lokacin shigar da binciken don sa ido kan rawar jiki na radial, ƙungiyoyin injiniya su daidaita ramuwar injin (mechanical gap) zuwa saitin da ake ba da shawara na 1.27 mm (mil 50). Wannan daidaiton jiki yana sanya firikwensin daidai a tsakiyar bangaren taga ta sa ido linzamin, wanda ke fassaruwa zuwa tushe na fitar da lantarki na -9 Vdc.

Wayoyin Filin da Tsarin Igiyoyi

Haɗin filin yana buƙatar wayoyi masu girman 0.2 zuwa 1.5 mm² (16 zuwa 24 AWG). Ana ba da shawara sosai a yi amfani da igiyar triad mai masu ɗauke da uku tare da garkuwar kariya da wayoyi na tinned don kare sigina. Ka tabbatar cewa tsayin igiyar da ke tsakanin 3300 XL Proximitor Sensor da rak ɗin na’urar sa ido bai wuce mita 305 (ƙafa 1,000) ba don hana raguwar siginar manyan mitoci.

Yanayin Zafi da Kariya ga Hatimin

Binciken daidaitacce yana iya jure babban kewayon aiki daga -52°C zuwa +177°C (-62°F zuwa +350°F). Duk da haka, ƙungiyoyin kiyayewa na musamman dole ne su lura cewa bayyana haɗin ga matsanancin sanyi ƙasa da -34°C (-30°F) na iya haifar da takurar tsarin da wuri da karyewar zoben matsin lamba na Viton da aka gina a ciki.

Manyan Fa’idodin Injiniya

Kyakkyawan Bin Daidaituwar Layi

Tsarin firikwensin mai tsawon mita 1 yana tabbatar da karkacewar Deviation from Best Fit Straight Line (DSL) ƙasa da ±0.025 mm (±1 mil) a ƙarƙashin yanayin zafin jiki na aiki na yau da kullum tsakanin 0°C zuwa +45°C. Wannan ƙaramin kuskuren aunawa sosai yana samar da bayanan motsi (displacement logs) masu santsi kuma masu maimaituwa sosai don madaukai na kariya masu matuƙar muhimmanci.

Kare Zubewar Viton®

Kowane binciken 3300 XL 8 mm yana da zoben O na Viton da aka haɗa wanda aka tsara musamman don toshewa da rufe bambancin matsin lamba tsakanin tip ɗin binciken da akwati na ƙarfe na waje. Don sa ido a kan matsin man fetur mai tsanani ko takaddun shaidar kullewa ta musamman, za a iya neman gwajin dakin gwaje-gwaje na musamman kafin a kaddamar da tsarin.

Juriya na Ciki na Daidaitacce

Tare da daidaitaccen tushe na juriya DC da aka auna a 7.59 ± 0.50 ohms daga mai ɗaukar ciki zuwa garkuwar waje, ƙungiyoyin tabbatarwa na iya yin gwaje-gwajen lafiyar aiki cikin sauri ta amfani da ma’aunin lantarki na dijital na yau da kullum kai tsaye a akwatin haɗin.

Tambayoyin Fasaha na Yawan Lokaci (FAQs)

Q1: Menene cikakken tsayin layin Bently Nevada 3300 XL na bincike 8 mm?

A1: Tsayin layi gabaɗaya yana da 2 mm (mil 80). Wannan taga na sa ido yana farawa kusan 0.25 mm (mil 10) daga fuskar abin da ake niyya, yana faɗaɗa zuwa 2.3 mm (mil 90), yana samar da fitar da siginar lantarki wanda ke tsakanin kusan -1 zuwa -17 Vdc.

Q2: Menene ainihin girman aikin kwandon kayan 330101-00-30-10-02-CN?

A2: Wannan takamaiman samfurin yana da tsawon ganga mara zare na inci 0.0 da jimillar tsawon akwati bakin karfe na inci 3.0, wanda ya dace da daidaitattun kusurwoyin fractional masu zaren 3/8-24 UNF.

Q3: Nawa nauyi kebul ɗin bincike na FEP da aka haɗa yake ƙara wa shigarwar?

A3: Kebul na bincike coaxial mara sulke na 75-ohm yana da ƙayyadadden nauyin tsari da aka daidaita na gram 323 a kowane mita (ouns 11.4 a kowane mita), wanda ke tabbatar da kebul mai sauƙin nauyi amma mai matuƙar kwanciyar martabar hanya.

Imel na Tuntuɓar Kasuwanci: sale@etowonauto.com