24701-28-05-20-024-03-02 Bently Nevada 3300 XL Masaukin firikwensin 8mm

Bently Nevada 24701-28-05-20-024-03-02 Ginin Masaukin Binciken Kusanci

Wannan taron yana aiki ne a matsayin akwati mai nauyi na kariyar muhalli da aka ƙera don ajiye da kare binciken kusanci na reverse-mount a cikin mawuyacin yanayin aikin masana’antu. Ta hanyar amfani da tsarin da aka ƙarfafa mai jure fashewa, wannan na’urar injiniya tana ba da damar auna girgizar shaft da matsayi na axial cikin daidaito a kan injinan turbin, compressors, da manyan na’urorin juyawa, yayin da take keɓe haɗin lantarki na cikin gida daga danshi na waje da zubewar iskar gas mai haɗari.

Ƙayyadaddun Fasaha

Jagorar Saurin Sakawa

• Dora tocilin ɗagawa (standoff adapter block) mai inci 2.0 a cikin kwandon injin ta amfani da zaɓuɓɓukan zaren ramin haɗawa 3/4-14 NPT da aka tanada.
• Tabbatar cewa murfin binciken bakin ƙarfe 304 na ciki ya ƙara shiga daidai inci 2.4 cikin akwati don samun madaidaiciyar daidaituwar siffar lissafi a kan burbushin kusanci.
• A hankali ka zare soket ɗin binciken reverse-mount 3300 XL 8mm da aka haɗa ta cikin bututun jagora na ciki, kana tura kebul ɗinsa na coaxial mai tsawon mita 0.5 cikin sauƙi zuwa yankin babban dome na haɗin shugaban na’ura.
• Zaɓi daidai girman ramfar roba ta waya (rubber wire grommet) (daga inci 1/8 zuwa 3/8) a cikin ƙugiyar hatimin kebul (cable seal grip) don ƙirƙirar kulle mai cikakken iska a kusa da layin haɗin tsawaita na waje, sannan ka murɗe murfin dome na waje ƙwarai cikin babban tubalin gidan bakin karfe 303.

Tambayoyin Fasaha (Technical FAQs)

Q1: Waɗanne sassan tsari ne aka haɗa a cikin taron jerin 24701 don kare kayan filin aiki?
A1: Cikakken saitin mai nauyin kilo 1.8 ya ƙunshi murfin dome mai ƙarfi da ke murɗewa kai tsaye cikin babban jikin gidan, ramuka na musamman don haɗin bututun conduit masu ƙarfi, murfin lura da tsawon bincike (probe tracking sleeve) da aka keɓance tsawonsa, zobba na roba na roba na musamman (synthetic O-rings), binciken firikwensin kusanci da aka girka a baya (reverse-mount proximity transducer probe), da hatiman zaren da aka haɗa. Wannan ƙirar na kiyaye daidaiton yanayin iska a kusa da ƙashin na’urar firikwensin a ƙarƙashin manyan matsin lamba.

Q2: Me ya sa aka yiwa lambar sashi da lambar serial lakabi da “Ba a Gani” a ƙarƙashin daidaitattun girma-girma?
A2: Saboda zurfin kutse na inci 2.4 da kuma takamaiman yanayin jikin na’urar firikwensin da aka girka a baya (reverse-mount sensor structure), duk bayanan alamar gane binciken ciki suna kasancewa gaba ɗaya a cikin murfin kariya na bakin karfe 304 bayan an tara. Ba za a iya duba waɗannan bayanan da ido ba sai an cire babban harsashin bakin karfe 303 na gidan daga bakin injin.

Q3: Ta yaya nau’o’in ramukan roba (grommets) daban-daban da ke kunshe a cikin zaɓin haɗin 03 ke taimakawa wajen girka tsarin?
A3: Kayan hatimin kebul na ramuka da yawa (multi-grommet cable seal kit) yana tallafa wa daidaita kayan a filin cikin aminci ta hanyar samar da ƙarfi, hatimi mai jure matsin lamba ga matakan diamita na waje guda uku: inci 1/8 zuwa 3/16, inci 1/4 zuwa 5/16, da inci 5/16 zuwa 3/8. Wannan yana bai wa tawagar masana’anta damar amfani da nau’o’in wayoyin kayan auna coaxial masu sulke ko marasa sulke na kamfanoni dabam-dabam ba tare da rage darajar kariyar fashewar da gidan ya ke da ita ba.