24701-28-05-00-040-04-02 Taron Firikwensin Bincike 3300 XL na Bently Nevada

Bayani Kan Samfur

Bently Nevada 24701-28-05-00-040-04-02 babban samfur ne mai ƙarfi na akwati da ke ɗauke da na’urar “proximity probe” da aka ƙera musamman don tsarin kare manyan injuna masu muhimmanci. Yana haɗa na’urar auna motsi ta eddy current 3300 XL 8mm da aka shigar a baya (reverse-mount) tare da akwati mai ƙarfi da ke jure yanayi, domin sauƙaƙa daidaitaccen auna girgizar shaft ba tare da taɓa shi ba da kuma sa ido kan matsayinsa. Tana da nauyin kilo 1.8 (4.1 lbs) ba tare da kayan haɗi ba, kuma wannan akwati mai inganci yana ba da damar gyara ko musanya probe cikin sauƙi yayin da injin ke aiki, har a cikin yankunan da ke da haɗari ko kuma ƙarƙashin matsa lamba mai yawa.

Manyan Fa’idodin Fasaha

• Garkuwar Karfe Biyu (Stainless Steel): An ƙera shi da jikin karfe 303 stainless steel da kuma rufin 304 stainless steel domin samar da ƙwararren kariya daga sinadarai, tsananin tsatsa/oxidation, da kuma guguwa ko gogayya ta inji.
• Inganta Gyara daga Waje: Yana amfani da tsarin reverse-mount na musamman wanda ke ba da damar saurin maye gurbin probe ko sake daidaita na’urar auna ta inji daga waje na jikin injin turbin ko compressor.
• Shigarwa Kai‑tsaye na NPT: Yana da zaren 3/4-14 NPT na hawa kai tsaye tare da dutsen murfi guda ɗaya mai 3/4-14 NPT domin samar da haɗin bututun wuta mai tsafta da ƙarfi, da kuma sauƙaƙe haɗawa da daidaitattun tsarin filin aiki.

Ƙayyadaddun Bayanai na Fasaha

Jagorar Shigarwa & Injiniya

• Hawa a Hanyar Tashar Tsari (Process Port): Sanya man shafa ko abin rufewar zaren da aka amince da shi a kan zaren hawa na 3/4-14 NPT. Ka murza akwatinsa mai nauyin kilo 1.8 a hankali cikin ramin jikin injin, tare da kulawa kada ka sare ko lalata rufin karfen stainless steel mai inci 4 yayin shigarwa.
• Daidaita Tazarar Sensing Gap: Murza probe na ciki na reverse-mount 8mm ta cikin rufin sleeve. Haɗa digital voltmeter da madogarar fitarwar Proximitor monitor domin tabbatar da cewa matakin wutar lantarki ta DC na gap ya yi daidai da ƙayyadaddun injiniya kafin ka kulle murfin akwati.
• Haɗawa da Rufe Bututun Conduit: Fitar da kebul mai sassauci na tsawon mita 0.5 ta cikin ramuka masu zaren NPT biyu. Ka matse murfin dome a kan O-rings masu kariya na ciki gaba ɗaya domin kunna katangar kariya mai ƙarfi ta muhalli da kare haɗin sensor daga taruwar mai ko sauran ruwaye.

Tambayoyi na Fasaha (FAQs)

Q1: Wace fa’ida ce zaɓin probe na reverse-mount ke kawowa ga wannan akwati?
A1: Tsarin reverse-mount yana ba ma’aikatan kula da injina damar shigarwa, daidaita gap, da kuma maye gurbin probe sensor 3300 XL 8mm kai tsaye daga waje na jikin injin ba tare da buƙatar cire babban rufin sleeve ɗin ba ko dakatar da babban rufin magudanar ruwa (fluid casing).

Q2: Me ya sa girman tazarar shigarwa na inci 13.5 yake da muhimmanci?
A2: Girman inci 13.5 (34.3 mm) shi ne ke ƙayyade jimillar sararin tazara na jiki da ake buƙata gaba ɗaya domin a iya kwance zaren akwati da probe ɗin ciki gaba ɗaya a fitar da su kai tsaye daga jikin injin yayin zagayen dubawa.

Q3: Waɗanne muhimman sassan tsari ne ake haɗawa da wannan rukuni na majalisar karkata (standard assembly)?
A3: Cikakken kunshin masana’anta ya ƙunshi murfin dome da aka goga da ƙarfi, jiki mai nauyi da ke da ramukan zaren conduit, rufin probe daidaitacce da zaɓi, O-rings masu jure yanayin zafi, probe na proximity da aka shigar a baya (reverse-mount), abin rufewar zaren, da kuma dutsen murfi na 3/4-14 NPT.