Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.
SKU:6ES7350-1AH03-0AE0
SIEMENS 6ES7350-1AH03-0AE0 S7-300 Counter Module
Manufacturer: Siemens
Product No.: 6ES7350-1AH03-0AE0
Product Type: Counter Module
Product Origin: DE
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months
Ulashish
- Tez yetkazib berish
- 24/7 Qo'llab-quvvatlash
- Sifat nazorati
Tavsif
SIEMENS 6ES7350-1AH03-0AE0 SIMATIC S7-300 FM 350-1 Counter Module
The SIEMENS 6ES7350-1AH03-0AE0, also cataloged as the FM 350-1 Counter Module, operates as a dedicated single-channel high-speed counter for S7-300 systems, processing incremental encoder signals up to 500 kHz over the backplane bus.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6ES7350-1AH03-0AE0 |
| Brand | SIEMENS |
| Product Type | FM 350-1 Counter Module |
| Series | SIMATIC S7-300 |
| Weight | 250 g (approx.) |
| Dimensions | 40 mm width x 125 mm height x 120 mm depth |
| Rated Supply Voltage | 24 VDC |
| Permissible Voltage Range | 20.4 V to 28.8 VDC (dynamic 18.5 V to 30.2 V) |
| Current from Load Voltage 1L+ | 40 mA max (without load) |
| Current from Backplane Bus | 160 mA max at 5 VDC |
| Power Loss | 4.5 W typ. |
| Counter Inputs | 1 channel, 32 bit or +/-31 bit |
| Counting Frequency | 500 kHz max (5 V), 200 kHz max (24 V) |
| 5 V Encoder Supply | 5.2 V +/-2%, 300 mA max |
| 24 V Encoder Supply | 1L+ (-3 V), 400 mA max |
| Digital Inputs | 3 (gate start, gate stop, counter set) |
| Digital Outputs | 2, short-circuit protected, 0.5 A rated |
| Front Connector | 1x 20-pin |
| Isolation | Tested at 500 V |
Counter Inputs and Encoder Interface
Single 32-bit counter channel accepts symmetrical incremental encoders with two pulse trains offset by 90 deg, asymmetrical incremental encoders, 24 V initiators, and 24 V directional elements with one pulse train and one direction level. The 5 V counter input uses RS 422 differential signaling with a 220 ohm terminating resistor and 1.3 V differential input voltage. The 24 V counter input accepts +11 V to +28.8 V for signal "1" and -28.8 V to +5 V for signal "0" at 9 mA typical input current, with a minimum pulse width of 2.5 us. Potential separation between channels and the backplane bus is provided by optocouplers on digital inputs, digital outputs, and the counter. Isochronous mode is supported for deterministic cycle-synchronized operation. A configuration package is included on CD.
Frequently Asked Questions
Q: What is the maximum counting frequency of the FM 350-1?
A: 500 kHz for the 5 V RS 422 differential input, and 200 kHz for the 24 V input.
Q: What is the weight and physical size of the 6ES7350-1AH03-0AE0?
A: Approximately 250 g, with dimensions of 40 mm width, 125 mm height, and 120 mm depth.
Q: What front connector does the module require?
A: One 20-pin front connector.
Field Installation Guidelines
Insert the module into an S7-300 rack and secure with the mounting screws. Wire the 20-pin front connector per the module pin assignment before energizing. Verify supply voltage at 1L+ and 2L+ is within 20.4 V to 28.8 VDC. Route encoder cables separate from high-current power conductors to preserve signal integrity at 500 kHz. Confirm the 5 V encoder supply load does not exceed 300 mA and the 24 V encoder supply load does not exceed 400 mA. Verify the encoder type and signal format match the configured counting mode before commissioning.
Qo'shimcha Texnik Tavsiflar
Skalyar (V/f)
Vektor
AC quvvatli
Sotib olish bo‘yicha qo‘llanma
- Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
- Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
- Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
- Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
- O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.
Yuborish va Qaytarish
Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.
Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.
Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Tez yetkazib berish
Dunyoda tez yetkazib berish uchun original sanoat avtomatlashtirish qismlari mavjud.
-
Oson qaytarish
Ishonchli sotuvdan keyingi himoya uchun 12 oylik kafolat bilan 30 kunlik qaytarish qo'llab-quvvatlashi.
-
24/7 qo‘llab-quvvatlash
Barqaror va samarali ish faoliyatini ta'minlash uchun javobgar professional yordam.
-
Haqiqiy va Asl
100% haqiqiy, ishonchli sanoat avtomatlashtirish ishlab chiqaruvchilaridan to‘g‘ridan-to‘g‘ri olingan.
Texnik va Xarid Qollanmasi
-
What Logic Changes Cut SIS False Trips by 94%?
This article examines practical logic modification and parameter tuning methods for ABB 800xA HI SIL3 safety ins...
-
Why Do FTE Redundancy Failovers Lock Up in DCS?
Honeywell FTE delivers sub-500 ms failover for Experion PKS, yet field records show 38% of outages stem from installa...
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
-
What CFC Rules Cut PCS7 Batch Abort Rates Fast?
This article presents enforceable CFC programming governance rules for Siemens PCS7 DCS batch plants, covering b...
-
What Makes the 1769-L3ER Ideal for Compact Skid Automation?
This guide explains how the Allen-Bradley 1769 CompactLogix L3ER bridges the gap between micro PLCs and large DC...
