Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
0
  • 330908-00-19-10-02-05
  • 330908-00-19-10-02-05-1
  • 330908-00-19-10-02-05-2
1 3

330908-00-19-10-02-05

Bently Nevada 3300 NSv 330908-00-19-10-02-05 Probe

Omborda (12 dona), jo'natishga tayyor

  • Manufacturer: Bently Nevada

  • Product No.: 330908-00-19-10-02-05

  • Product Type: 3300 NSv Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 150g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

Product Overview

The Bently Nevada 330908-00-19-10-02-05 is a premium 3300 NSv series eddy current proximity probe designed for critical shaft vibration and displacement monitoring in tight mechanical clearances. Featuring a 3/8-24 UNF unarmored thread configuration with a 0-inch unthreaded length and a 1.9-inch overall case length, this transducer is built with a rugged AISI 304 stainless steel case and a high-performance Polyphenylene Sulfide (PPS) probe tip. 

Technical Specifications

Parameter Specification Details
Manufacturer / Series Bently Nevada / 3300 NSv Transducer System
Full Part Number 330908-00-19-10-02-05
Thread & Armor Type 3/8-24 UNF thread / Without armor profile
Case Dimensions 0 in Unthreaded length / 1.9 in Overall case length
Total Probe Length 1.0 meter (39 inches) nominal
Linear Measurement Range 1.5 mm (60 mils) | Recommended gap: 1.0 mm (40 mils)
Incremental Scale Factor 7.87 V/mm (200 mV/mil) nominal
Probe DC Resistance 4.2 Ω ± 0.5 Ω (center conductor to outer shield)
Operating Temperature -52°C to +177°C (-62°F to +351°F)
Agency Approvals -05 Option (Multiple Approvals / Hazardous Area Rated)
Component Net Weight 14g to 150g (0.5oz to 5.3oz) baseline mass range

Installation & Handling Guidelines

Torque Limits: For the 3/8-24 probe case installation, the recommended tightening torque is 11.3 N·m (100 in·lb), with a maximum rated limit of 33.9 N·m (300 in·lb). Ensure maximum thread engagement does not exceed 0.563 inches. For connector-to-connector setup, use finger-tight or a maximum of 0.56 N·m (5 in·lb).
Physical Constraints: Maintain a minimum cable bend radius of 25.4 mm (1.0 inch) to prevent internal short circuits. The target area diameter must meet a absolute minimum of 8.9 mm (0.35 in), though 13 mm (0.5 in) is highly recommended to protect the integrity of the scale factor.

Technical FAQs

Q1: Is this probe compatible with older Bently Nevada proximity systems?

A1: Yes. The 3300 NSv probe is mechanically and electrically compatible and interchangeable with the legacy 3300 RAM proximity probe series, while offering superior chemical resistance.

Q2: What are the exact voltage parameters across its linear range?

A2: The 1.5 mm (60 mils) linear range spans from approximately 0.25 mm to 1.75 mm (10 to 70 mils) away from the target, translating to an electrical output of roughly -1 to -13 Vdc.

Q3: What type of environment is the pressure seal designed for?

A3: The integrated Viton O-ring seals differential pressure between the probe tip and case. However, please note that these standard probes are not custom pressure-tested prior to factory shipment.

Commercial Contact Email: sale@etowonauto.com

Product Resources

📄 Download PDF
🏷️ Tags: 3300 NSv Probe Proximity Probe

Skalyar (V/f)

Vektor

AC quvvatli
  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

 Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.

Hozir xarid qiling
Sanoat avtomatizatsiyasi qismlari uchun bosqichma-bosqich texnik maslahatlar va xarid qilish bo'yicha tavsiyalar.

Texnik va Xarid Qollanmasi

Barcha bloglarni ko‘rish