Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
0
  • 330101-00-28-90-02-00
  • 330101-00-28-90-02-00-1
  • 330101-00-28-90-02-00-2
1 3

330101-00-28-90-02-00

Original Bently Nevada 330101-00-28-90-02-00 8mm Probe

Omborda (21 dona), jo'natishga tayyor

  • Manufacturer: Bently Nevada

  • Product No.: 330101-00-28-90-02-00

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 450g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

Product Overview

The Bently Nevada 330101-00-28-90-02-00 is a high-performance 3300 XL Series 8 mm eddy current proximity probe designed for continuous shaft vibration, thrust position, and speed monitoring in critical machinery. Featuring a 3/8-24 UNF fully-threaded body with 0.0 inches unthreaded length and a 2.8-inch (71 mm) overall case length, this sensor is built with an integrated 9.0-meter (29.5 feet) standard coaxial cable terminated with a miniature coaxial ClickLoc™ connector and connector protector. Manufactured with an impact-resistant Polyphenylene sulfide (PPS) tip, TipLoc™ tip-molding, CableLoc™ 330 N cable retention, and an AISI 304 stainless steel case, the assembly has an approximate net hardware weight of 0.45 kg (0.99 lbs). It operates reliably across severe temperature conditions from -51°C to +177°C (-60°F to +351°F) and provides full interchangeability without individual system recalibration.

Technical Specifications

Parameter Specification Details
Manufacturer Bently Nevada
Part Number 330101-00-28-90-02-00
Product Line 3300 XL 8 mm Proximity Transducer System
Thread & Casing Dimensions 3/8-24 UNF thread / 0.0 in unthreaded / 2.8 in overall case length
Total Cable Length 9.0 meters (29.5 feet) nominal
Connector & Approval Profile Miniature coaxial ClickLoc™ connector with protector / No agency approvals
Linear Range & Scale Factor 2.0 mm (80 mils) linear range / 7.87 V/mm (200 mV/mil) ISF
Recommended Target Gap 1.0 mm (40 mils) corresponding to -10 Vdc bias output
Probe DC Resistance 12.6 Ω ± 0.8 Ω (Center to outer conductor for 9.0m cable)
Cable Capacitance & Construction 69.9 pF/m typical / FEP insulated 75 Ω coaxial cable
Operating Temperature Range -51°C to +177°C (-60°F to +351°F)
Component Net Weight Approx. 0.45 kg (0.99 lbs)

Installation & Torque Guidelines

Mechanical Installation: Thread the probe into a tapped 3/8-24 UNF housing opening. Apply the recommended installation torque of 7.3 N•m (65 in•lb), taking care not to exceed the maximum rated torque limit of 12.5 N•m (110 in•lb). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal coaxial conductor fatigue.
Gap Calibration & Connection: Set the initial probe gap to 1.0 mm (40 mils) from the shaft target to establish the nominal -10 Vdc voltage center point. Fasten the ClickLoc connector finger-tight (do not exceed 0.56 N•m / 5 in•lb) and secure the protective sleeve to prevent environmental corrosion and mechanical disengagement.

Technical FAQs

Q1: What does the -90- option code signify in the part number?

A1: The "90" code indicates a 9.0-meter (29.5 feet) total length configuration, allowing direct connection to a 9.0m 3300 XL Proximitor Sensor without an extension cable.

Q2: What is the recommended gap distance for setting probe bias voltage?

A2: The recommended gap is 1.0 mm (40 mils), which yields an approximate -10 Vdc output centered in the 2.0 mm (80 mil) linear operating range.

Q3: What is the maximum field wiring length supported back to the monitoring rack?

A3: Field wiring using 3-conductor shielded triad cable can extend up to 305 meters (1,000 feet) between the 3300 XL Proximitor sensor and the monitor rack.

Commercial Contact Email: sale@etowonauto.com

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Proximity Probe

Skalyar (V/f)

Vektor

AC quvvatli
  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

 Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.

Hozir xarid qiling
Sanoat avtomatizatsiyasi qismlari uchun bosqichma-bosqich texnik maslahatlar va xarid qilish bo'yicha tavsiyalar.

Texnik va Xarid Qollanmasi

Barcha bloglarni ko‘rish