Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
0
  • 330104-00-06-20-01-00
  • 330104-00-06-20-01-00-1
  • 330104-00-06-20-01-00-2
1 3

330104-00-06-20-01-00

M10 Eddy Current Probe | Bently Nevada Part 330104-00-06-20-01-00

Faqat 6 dona qoldi

  • Manufacturer: Bently Nevada

  • Product No.: 330104-00-06-20-01-00

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 150g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

Bently Nevada 3300 XL 8mm Proximity Transducer Probe (330104-00-06-20-01-00)

The Bently Nevada 330104-00-06-20-01-00 is a high-precision 3300 XL 8mm eddy current proximity probe designed for continuous non-contact shaft vibration and axial position measurement on industrial rotating equipment. Made in the USA, this transducer features an M10x1 thread, protective cable armor, a 2.0-meter (6.6 feet) total length, an approximate weight of 0.150 kg, and a ClickLoc™ coaxial connector equipped with an integrated connector protector.

Key Mechanical & Construction Features

Engineered with an approximate weight of 0.150 kg, AISI 303/304 stainless steel housing, and a durable Polyphenylene Sulfide (PPS) tip, this probe utilizes a Viton® O-ring to seal differential pressure between the tip and case. The factory-installed connector protector shields the ClickLoc™ terminal from environmental contamination and moisture, while armored cabling guards against mechanical impact and abrasion.

Part Number Breakdown (330104-00-06-20-01-00)

Unthreaded Length Option (-00) 00 = 0 mm Unthreaded Length (Fully Threaded Case)
Overall Case Length Option (-06) 06 = 60 mm Overall Case Length (M10 x 1 Thread)
Total Length Option (-20) 20 = 2.0 meters (6.6 feet) Total Cable Length
Connector & Cable Option (-01) 01 = Miniature ClickLoc™ coaxial connector with connector protector, armored cable
Agency Approval Option (-00) 00 = Not required (Standard Uncertified Version)

Technical & System Specifications

Manufacturer & Origin Bently Nevada (Made in U.S.A.)
Product Series & Model 3300 XL 8 mm Series (330104)
Approximate Weight 0.150 kg (Approx. 0.33 lbs)
Case & Tip Materials AISI 303/304 Stainless Steel / Polyphenylene Sulfide (PPS)
Proximitor Power Requirements -17.5 Vdc to -26 Vdc (12 mA max) / -23 Vdc to -26 Vdc (with barriers)
Supply Sensitivity & Output Resistance < 2 mV change per volt change / 50 Ω output resistance
Standard Target Calibration AISI 4140 Steel Target, gapped at 1.27 mm (50 mils)

Installation & System Compatibility Guidelines

  • Target Material: Accuracy and interchangeability standards rely on calibration to an AISI 4140 steel target. Alternate target materials require system recalibration.
  • Gap Adjustment: Mechanically set the baseline gap to 1.27 mm (50 mils) within standard operating ambient temperatures (+18°C to +27°C) for optimal linear performance.
  • Connector Protection: Slide the connector protector securely over the coaxial joint after tightening to prevent liquid ingress and particulate accumulation.

Frequently Asked Questions

Q1: What does the connector protector option (-01) do?
A1: Provides extra rubber or composite weatherproofing over the coaxial connection to prevent shorting or corrosion from fluid spray.

Q2: Is a 2.0m probe usable directly with a Proximitor sensor?
A2: Yes, when paired with the corresponding 3.0m or 7.0m extension cable to complete a standard 5m or 9m total system length.

Q3: How does supply voltage influence measurement stability?
A3: Operating at voltages more positive than -23.5 Vdc can degrade linearity across the full measuring dynamic range.

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Proximity Probe

Skalyar (V/f)

Vektor

AC quvvatli
  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

 Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.

Hozir xarid qiling
Sanoat avtomatizatsiyasi qismlari uchun bosqichma-bosqich texnik maslahatlar va xarid qilish bo'yicha tavsiyalar.

Texnik va Xarid Qollanmasi

Barcha bloglarni ko‘rish