Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
0
1 3

IC697HSC700

IC697HSC700 GE Fanuc Series 90-70 High-Speed Counter Module

Omborda (21 dona), jo'natishga tayyor

  • Manufacturer: General Electric

  • Product No.: IC697HSC700

  • Product Type: High-Speed Counte Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 220g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

Product Overview

The GE Fanuc IC697HSC700 is a high-performance, single-slot High-Speed Counter (HSC) module designed for the Series 90-70 PLC system. Engineered for real-time motion control, turbine pulse monitoring, and high-speed material handling, it processes input pulse frequencies up to 200 kHz (or up to 800 kHz in Type E Quadrature x4 mode). Featuring 4 integrated positive logic outputs with short-circuit protection, the IC697HSC700 provides rapid direct output response independent of PLC scan times. Weighing approximately 0.22 kg (0.49 lbs), it offers high-density counting performance in a lightweight module footprint.

Technical Specifications

Parameter Specification
Product Model IC697HSC700
PLC Compatibility GE Fanuc Series 90-70 System
Maximum Input Frequency 200 kHz (Types A/D) / 800 kHz (Type E Quad B x4 Mode)
Input Voltage Levels 5 VDC TTL or 10–30 VDC Differential / Single-Ended
Output Channels 4 Positive Logic (Sourcing) Outputs
Output Voltage & Current 10–30 VDC @ up to 20 mA per channel
Backplane Current Draw 0.8 A @ 5 VDC (from PLC backplane)
Output Protection Electronic Short-Circuit & Overcurrent Protection
Operating Temperature 0°C to 60°C (32°F to 140°F)
Net Weight 0.22 kg (0.49 lbs)

Key Design & Hardware Features

  • High-Speed Pulse Input Processing: Accurately tracks high-speed encoder feedback up to 200 kHz for precise position, velocity, and length measurement.
  • Direct Onboard Outputs: Includes 4 fast-responding outputs that trigger based on pre-set counter match values, bypassing PLC CPU scan delay.
  • Flexible Signal Modes: Configurable for multiple counting modes, including Up/Down counting, Pulse/Direction, and Quadrature A/B encoder inputs.
  • Built-In Circuit Diagnostics: Integrated short-circuit protection and front-panel status LEDs enable visual diagnostic feedback during commissioning.

Installation & Engineering Guidelines

1. Encoder Signal Selection: Select the correct input jumpers or field wiring connections depending on whether your rotary encoder provides 5 VDC differential signals or 10–30 VDC single-ended signals.

2. Shielding & Cable Grounding: Always use twisted-pair shielded cables for high-speed input signals and ground the shield at the module terminal block to suppress high-frequency electrical noise.

3. External Field Power: Connect an external 10–30 VDC power supply to the module terminal block to energize the onboard positive logic output channels.

Frequently Asked Questions (FAQs)

Q1: Can the IC693 series PLCs use the IC697HSC700 module?
A1: No. The IC697HSC700 is specifically designed for the GE Fanuc Series 90-70 backplane and is not physically or electrically compatible with Series 90-30 racks.

Q2: What is the maximum counting frequency supported by the IC697HSC700?
A2: The module supports standard input pulse rates up to 200 kHz, which translates to an effective 800 kHz count rate when configured in Quadrature x4 mode.

Q3: How do the onboard outputs operate relative to the PLC scan cycle?
A3: The 4 onboard outputs operate asynchronously to the CPU scan. They trigger instantly when internal counter registers reach target setpoints, providing millisecond-level response times.

🏷️ Tags: High-Speed Counte Module

Skalyar (V/f)

Vektor

AC quvvatli
  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

 Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.

Hozir xarid qiling
Sanoat avtomatizatsiyasi qismlari uchun bosqichma-bosqich texnik maslahatlar va xarid qilish bo'yicha tavsiyalar.

Texnik va Xarid Qollanmasi

Barcha bloglarni ko‘rish