Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
0
  • IC200ALG262
  • IC200ALG262-1
  • IC200ALG262-2
1 3

IC200ALG262

GE Fanuc IC200ALG262 8-Channel Analog Current Module

Faqat 10 dona qoldi

  • Manufacturer: General Electric

  • Product No.: IC200ALG262

  • Product Type: Analog Input Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 130g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

Product Overview

The IC200ALG262 is a high-precision 15-Bit Differential Analog Current Input Module from the GE VersaMax PLC series. This module features 8 isolated differential input channels designed to interface with industrial current transmitters, such as flow meters, pressure sensors, and temperature links. By providing superior noise rejection across balanced signal lines, it delivers stable, high-resolution telemetry data directly to the core automation controller.

Core Features

  • 15-Bit High Resolution: Provides extreme measurement sensitivity down to 0.5 µA for precise process loop control.
  • Isolated Differential Inputs: Features 8 differential channels that reject common-mode noise and eliminate ground loop interference.
  • Smart Diagnostics: Offers active loss-of-field-side power monitoring and open-wire fault detection.
  • Flexible Current Ranges: Supports standard industrial signal matching via hardware jumper selection.

Technical Specifications

Parameter Data
Model Number IC200ALG262
Input Configurations 8 Isolated Differential Channels
Selectable Current Ranges 4 to 20 mA or 0 to 20 mA (Jumper Selectable)
Measurement Resolution 15 bits (0.5 µA for 4–20 mA / 0.625 µA for 0–20 mA)
Module Net Weight Approx. 0.13 kg (4.6 oz)
Channel Update Rate 7.5 milliseconds per channel
Input Impedance / CMRR 100 Ω / 70 dB typical Common Mode Rejection Ratio
Common Mode Range −10V to +10V
Internal Power Draw 200 mA maximum from the +5V PLC backplane
Status Indicators Green "OK" LED confirms backplane power and active module health

Engineering & Installation Guide

  • Shielded Wiring Standards: Always route analog input signals using high-quality Shielded Twisted Pair (STP) cable to block electromagnetic interference (EMI).
  • Proper Shield Grounding: Terminate cable shields at the signal source end. If the source is ungrounded, connect the shield drain wire to the VersaMax I/O auxiliary terminal strip.
  • Open Wire Detection Limits: Note that open-wire fault monitoring only functions when the channel jumper is explicitly configured for the 4 to 20 mA operational range.
  • Weight and Vibration Support: At a lightweight 0.13 kg, ensure the module snaps firmly into its carrier base to avoid contact oxidation during industrial machine vibrations.

Technical FAQs

Q1: How do I switch between 0–20 mA and 4–20 mA current input ranges on the IC200ALG262?
A1: The current range configuration is managed via physical wiring jumpers on the terminal carrier block. Adding or removing specific channel jumper links scales the internal 15-bit analog-to-digital converter to match the desired instrument output span.

Q2: What happens if field-side loop power drops during operation?
A2: The module instantly triggers a "loss of field-side power" diagnostic flag. This system alert reports up through the VersaMax CPU PLC hardware diagnostics table while the onboard "OK" LED provides visual status confirmation of backplane health.

Q3: Why are differential inputs preferred over single-ended inputs for current loops?
A3: Differential inputs look at the voltage difference between two separate signal lines rather than measuring against system ground. This approach successfully cancels out common-mode noise and cross-talk voltages, which is vital when routing analog wires over long industrial distances.

🏷️ Tags: Analog Input Module

Skalyar (V/f)

Vektor

AC quvvatli
  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

 Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.

Hozir xarid qiling
Sanoat avtomatizatsiyasi qismlari uchun bosqichma-bosqich texnik maslahatlar va xarid qilish bo'yicha tavsiyalar.

Texnik va Xarid Qollanmasi

Barcha bloglarni ko‘rish