Mundarijaga o'tish
Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
Mahsulot ma'lumotlariga o'tish
1 ning 3

SKU:V18345-1010221001

ABB V18345-1010221001 Valve Positioner | Original Stock

Omborda (25 dona), jo'natishga tayyor
  • Manufacturer: ABB

  • Product No.: V18345-1010221001

  • Product Type: Valve Positioner Module

  • Product Origin: Sweden

  • Payment:T/T, Western Union

  • Weight: 1700g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

ABB V18345-1010221001 Valve Positioner

The V18345-1010221001 (also cataloged as the V18345 Valve Positioner) is a TZIDC-120 intelligent positioner in a varnished aluminium case rated IP 65 (NEMA 4X). It accepts a 4-20 mA two-wire input and provides single-acting, fail-freeze output for linear actuators to DIN/IEC 534 / NAMUR or rotary actuators to VDI/VDE 3845. Unit weight is 1.7 kg.

Hardware Specifications

Parameter Specification
Model V18345-1010221001
Brand ABB
Product Type Valve Positioner (TZIDC-120)
Enclosure Aluminium, varnished, IP 65 (NEMA 4X)
Weight 1.7 kg
Input Signal 4-20 mA, two-wire
Input Limit Max. 25 mA / 30 V
Impedance at 20 mA 435 ohms
Output Range 0 to 6 bar (0 to 90 psi)
Air Capacity at 6 bar 13 kg/h = 10 Nm3/h = 6.0 scfm
Output Function Single acting, fail freeze
Pneumatic Connections Air pipe: Thread 1/4-18 NPT
Electrical Connections Cable: Thread 1/2-14 NPT
Position Feedback Plug-in analog module, 4-20 mA
Explosion Protection Without

Electropneumatic Control Characteristics

The V18345 positioner uses two-wire technology with a nominal 4-20 mA range and supports split range configuration between 20 % and 100 % of nominal range. Minimum operating current is 3.4 mA without analog position feedback and 3.5 mA with the feedback module installed; start-up is from 3.8 mA. Load voltage at 20 mA is 8.7 V DC with a 435 ohm input impedance. A digital input accepts 24 V DC (12-30 V DC), with 0-10 V DC interpreted as logical 0 and 12-30 V DC as logical 1, drawing a maximum of 4 mA. The digital output follows the DIN 19234/NAMUR control circuit at 5-11 V DC, with less than 1.0 mA as logical 0 and greater than 2.0 mA as logical 1. Pneumatic output spans 0 to 6 bar (0 to 90 psi); air capacity at a 6 bar supply is 13 kg/h (10 Nm3/h, 6.0 scfm). Shut-off values are adjustable to 0-45 % at end position 0 % and 55-100 % at end position 100 %. The unit weighs 1.7 kg.

Field Installation Guidelines

Mount the positioner to a linear actuator per DIN/IEC 534 / NAMUR or to a rotary actuator per VDI/VDE 3845 using the mechanical kit. Verify the varnished aluminium case remains sealed to maintain IP 65 (NEMA 4X) integrity. Confirm the 1.7 kg unit is supported by the actuator mounting bracket during installation. Connect the 4-20 mA two-wire input through the 1/2-14 NPT cable entry and the air supply through the 1/4-18 NPT air pipe port. Confirm supply air is dry and oil-free at or below 6 bar before pressurizing. Route signal wiring separately from AC power conductors. Set the split range and fail-freeze action in configuration before placing the loop in service. Verify shut-off values at both end positions after commissioning.

Frequently Asked Questions

Q: What is the input signal and impedance of the V18345-1010221001?
A: 4-20 mA two-wire input with 435 ohms impedance at 20 mA.

Q: What is the fail-safe action of this configuration?
A: Single acting, fail freeze.

Q: What are the pneumatic and electrical connection thread sizes?
A: Air pipe: 1/4-18 NPT; cable: 1/2-14 NPT.

Product Resources

📄 Download PDF
  • Kumush

Skalyar (V/f)

Vektor

AC quvvatli

  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.