GE Fanuc IC697PWR710 Series 90-70 Power Supply Module 100W

Product Overview

The GE Fanuc IC697PWR710 is a high-efficiency power supply module designed for the Series 90-70 Programmable Logic Controller (PLC) system architecture. Capable of operating from a wide input range of 85 to 265 VAC (120/240 VAC nominal, 47 to 63 Hz) or 125 VDC, this module supplies steady, regulated power to the IC697 backplane. It delivers a nominal 5.1 VDC output providing up to 11 Amps for CPU, memory, and I/O communication modules. Operating at a minimum efficiency of 90% with low ripple noise (50 mV peak-to-peak), the IC697PWR710 weighs approximately 0.75 kg and ensures stable execution across demanding industrial automation environments.

Technical Specifications

Key Hardware & Performance Features

• Dual AC/DC Input Flexibility: Accepts both standard single-phase AC voltages (85-265 VAC) and direct 125 VDC plant power without requiring manual jumper configuration.
• High Conversion Efficiency: Delivers over 90% power conversion efficiency, minimizing internal rack heat generation and protecting neighboring system modules.
• Precision Backplane Voltage Regulation: Holds output ripple down to 50 mV peak-to-peak at 5.1 VDC to prevent digital bus corruption across heavy I/O loads.
• Industrial Temperature Tolerance: Engineered for operation between -10°C and 50°C in standard industrial control enclosures.

Installation & Field Wiring Guidelines

1. Module Slot Placement: Install the IC697PWR710 into the designated power supply slot on the far left side of the GE Fanuc Series 90-70 backplane rack.

2. Input Power Wiring: Ensure input power lines are de-energized prior to connecting 120/240 VAC or 125 VDC wiring to the front terminal strip. Maintain proper protective earth (PE) grounding connections.

3. Current Budget Verification: Calculate total rack current consumption to confirm total 5 VDC module usage remains within the 11 Amp limit of the IC697PWR710 power supply.

Frequently Asked Questions (FAQs)

Q1: What is the output power capacity of the GE Fanuc IC697PWR710?
A1: The module delivers a nominal 5.1 VDC at up to 11 Amps (55W nominal load capacity) to power Series 90-70 backplane components.

Q2: Can the IC697PWR710 operate on DC input power?
A2: Yes, in addition to standard 85-265 VAC inputs, the IC697PWR710 accepts a nominal 125 VDC supply.

Q3: What PLC system rack is compatible with the IC697PWR710?
A3: The IC697PWR710 is specifically designed for installation in GE Fanuc Series 90-70 VME-based rack systems.