GE Fanuc IC693CBL329 Expansion Cable 1 Meter 24 Pin

Product Overview

The GE Fanuc IC693CBL329 is a high-quality 1-meter I/O expansion cable specifically designed for the Series 90-30 PLC system. This cable is essential for interconnecting expansion racks to the main CPU rack, enabling the distribution of control signals across multiple chassis. Featuring a space-saving 90-degree left-angle 24-pin connector, the IC693CBL329 is engineered for clean cable management in tight industrial enclosures where depth is restricted.

Technical Configuration

Robust construction for reliable PLC rack communication:

• Cable Type: Series 90-30 I/O Expansion Bus Cable
• Connector A/B: 24-Pin High-Density Connectors
• Orientation: 90-degree left-angle (2-inch connector depth)
• Conductor Build: 24 AWG high-purity copper
• Conductor Count: 24 individual conductors
• Environmental Shielding: Industrial-grade black PVC jacket

Technical Specifications

Engineering Advantages

The IC693CBL329 stands out due to its 90-degree left-angle connector, which significantly reduces the footprint required in front of the PLC rack, allowing for shallower cabinet designs. The use of 24 AWG copper conductors ensures low signal attenuation over the 1-meter span, maintaining bus integrity for high-speed I/O data. Additionally, the 50mm minimum bend radius and 8mm overall cable diameter provide the flexibility needed for intricate routing through wire ducts without compromising the internal 24-conductor matrix.

Technical FAQs

Q1: Can this cable be used for rack-to-rack power distribution?
A1: No. This cable is strictly intended for I/O bus signals. While it has a 1.5A current rating per conductor, it is not designed to replace the specialized power cables required for the expansion power supply modules.

Q2: How does the "left-angle" orientation affect installation?
A2: "Left-angle" refers to the direction the cable exits the connector when plugged into the rack. This is particularly useful when the cable needs to route toward a wire duct located on the left side of the chassis, minimizing strain on the port.

Q3: Is the IC693CBL329 compatible with the Series 90-70?
A3: No. This cable is specifically designed for the pinout and physical connector style of the Series 90-30 PLC expansion ports. For Series 90-70, you would require an IC600 or IC697 series expansion cable.