Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
  • IC693APU301
  • IC693APU301-1
  • IC693APU301-2
1 3

IC693APU301

GE Fanuc IC693APU301 Positioning Module | Original Stock

A kan haja (21 guda), a shirye don aikawa

  • Manufacturer: General Electric

  • Product No.: IC693APU301

  • Product Type: Axis Positioning Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

GE Fanuc IC693APU301 Single Axis Positioning Module

The IC693APU301 (also cataloged as the APU301 Single Axis Positioning Module) executes motion control within the GE Series 90-30 PLC backplane. It integrates axis positioning with PLC logic solving, providing one axis of servo loop control per module in a single-slot form factor.

Hardware Specifications

Parameter Specification
Model IC693APU301
Brand GE Fanuc
Product Type Single Axis Positioning Module (APM)
Platform Series 90-30 PLC
Number of Axes 1
Servo Loop Update Time 1 millisecond
Control Method Logic-based axis control
Operating Modes Standard mode, Follower mode
Max Modules per CPU 8 in a modular CPU system
Installation Any Series 90-30 CPU, remote baseplate, or expansion baseplate
Configuration Software VersaPro
Weight Approx. 0.5 kg (module only)

Motion Control Modes

The IC693APU301 operates in two selectable modes. Standard mode combines motion control with PLC logic solving, allowing the module to execute positioning programs while the CPU scans ladder logic. Follower mode enables electronic gearing, where the axis follows a master encoder or command source for continuous master/slave operations. Axis control is logic-based, with the servo loop closed every 1 millisecond. Up to 8 modules can reside in a modular CPU system, giving a maximum of 8 axes per rack configuration.

Field Installation Guidelines

Insert the module into any available slot in the Series 90-30 CPU, remote baseplate, or expansion baseplate. Verify the backplane connector is fully seated before applying power. Confirm the total number of APM modules does not exceed 8 in a modular CPU system. Route servo command and encoder feedback cables separately from high-voltage AC conductors to prevent induced noise on the 1 millisecond loop. Use shielded cable for encoder and analog command lines, with the shield terminated at the module end only. Configure axis parameters in VersaPro before enabling the servo. Verify the 1 millisecond servo loop update is stable by monitoring axis following error under load.

Frequently Asked Questions

Q: How many IC693APU301 modules can be installed in one system?
A: Up to 8 modules in a modular CPU system. Each module provides one axis of control.

Q: Can the module be installed in a remote baseplate?
A: Yes. It can be installed in any Series 90-30 CPU, remote baseplate, or expansion baseplate.

Q: What software is used for configuration?
A: VersaPro software is recommended for setup and configuration of motion programs.

🏷️ Tags: Positioning Module

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog