Kayan aikin sarrafa kansu, isarwa a ko’ina cikin duniya
0
  • 330104-01-08-50-01-05
  • 330104-01-08-50-01-05-1
  • 330104-01-08-50-01-05-2
1 3

330104-01-08-50-01-05

330104-01-08-50-01-05 | Bently Nevada 8mm Proximity Probe

A kan haja (19 guda), a shirye don aikawa

  • Manufacturer: Bently Nevada

  • Product No.: 330104-01-08-50-01-05

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 323g

  • Shipping port: Xiamen

  • Warranty: 12 months

Dokar Mayar da Kaya na Kwanaki 30 · Garantin Watanni 12
  • Isarwa Cikin Gaggawa
  • Tallafi na awa 24 a rana, kwana 7 a mako
  • Tabbacin Inganci

Bayani

Bently Nevada 330104-01-08-50-01-05 8mm Proximity Probe

Bently Nevada 330104-01-08-50-01-05 | 3300 XL 8mm Proximity Probe, M10x1 metric thread, with 5.0 m armored cable. Provides 7.87 V/mm (200 mV/mil) output over a 2 mm (80 mils) linear range. Engineered for radial vibration, axial position, and Keyphasor measurements in turbomachinery, compressors, and pumps. CSA, ATEX, and IECEx certified. Weight: approximately 323 g/m (11.4 oz).

Key Features

2 mm (80 mils) linear measurement range from 0.25 to 2.3 mm. 7.87 V/mm (200 mV/mil) scale factor. Recommended gap -9 Vdc (approx. 1.27 mm / 50 mils). Patented TipLoc and CableLoc designs provide 330 N (75 lbf) pull strength. Miniature coaxial ClickLoc connector with connector protector (Option 01). 5.0 m (16.4 ft) armored cable (Option 50). PPS probe tip material. AISI 303/304 stainless steel case. M10x1 thread, 15 mm maximum thread engagement. Operating temperature -52°C to +177°C. Weight 323 g/m (11.4 oz).

Technical Specifications

Manufacturer Bently Nevada
Part Number 330104-01-08-50-01-05
Product Type 3300 XL 8mm Probe, M10x1, with armor
Unthreaded Length (Option 01) 10 mm
Overall Case Length (Option 08) 80 mm
Total Length (Option 50) 5.0 m (16.4 ft)
Connector Type (Option 01) Miniature ClickLoc with connector protector
Agency Approval (Option 05) CSA / ATEX / IECEx (Multiple Approvals)
Linear Range 2 mm (80 mils) from 0.25 to 2.3 mm
Recommended Gap (Radial Vibration) -9 Vdc (approx. 1.27 mm / 50 mils)
Incremental Scale Factor (ISF) 7.87 V/mm (200 mV/mil)
Probe DC Resistance (5.0m) 8.73 ± 0.50 Ω
Field Wiring Length Max 305 m (1,000 ft), 16-24 AWG shielded triad
Probe Tip Material Polyphenylene sulfide (PPS)
Probe Case Material AISI 303 or 304 stainless steel
Case Thread M10 x 1
Maximum Thread Engagement 15 mm
Pull Strength 330 N (75 lbf)
Operating Temperature (Standard) -52°C to +177°C (-62°F to +350°F)
Storage Temperature (Standard) -52°C to +177°C (-62°F to +350°F)
Pressure Seal Viton O-ring
Relative Humidity 93% for 56 days (<3% ASF change)
Weight 323 g/m (11.4 oz)
Origin Made in U.S.A.

Ordering Code Breakdown

330104-01-08-50-01-05

330104 – 3300 XL 8mm Probe, M10x1 thread, with armor.
01 – Unthreaded Length: 10 mm.
08 – Overall Case Length: 80 mm.
50 – Total Length: 5.0 m (16.4 ft).
01 – Miniature ClickLoc with connector protector.
05 – Multiple approvals (CSA, ATEX, IECEx).

Hazardous Area Approvals

Intrinsic Safety (ia) Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga; Class I, Groups A-D; Class II, Groups E-G; Class III
Non-Sparking (nA, ec) Class I, Zone 2: AEx/Ex nA IIC T5...T1 Gc; Class I, Division 2, Groups A-D; Class I, Zone 2: AEx/Ex ec IIC T5...T1 Gc

Installation Notes

Mount probe using M10x1 metric thread. Maximum thread engagement 15 mm. Set initial gap to -9 Vdc (approx. 1.27 mm / 50 mils) for radial vibration monitoring. Use 3-conductor shielded triad cable for field wiring (16-24 AWG), max length 305 m (1,000 ft). The 5-meter probe is designed for use with the 5-meter Proximitor Sensor only. Ensure temperature does not drop below -34°C (-30°F) to prevent pressure seal failure. For hazardous area installation, use intrinsic safety barriers per drawing 141092 or non-incendive circuit per drawing 140979.

Engineering Advantages

M10x1 metric thread simplifies installation in metric-dimensioned machinery. 5.0 m armored cable extends reach and protects against mechanical damage in harsh environments. Connector protector enhances durability in humid or contaminated areas. 8mm probe design delivers thicker PPS encapsulation for superior durability. TipLoc and CableLoc technologies prevent common failure modes. CSA, ATEX, and IECEx certifications enable global hazardous area installation.

FAQs

Q1: What is the cable length?
A1: 5.0 m (16.4 ft) armored cable (Option 50).

Q2: What does Option 01 provide for the connector?
A2: Miniature ClickLoc connector with connector protector for enhanced environmental durability.

Q3: What hazardous area approvals are included?
A3: CSA, ATEX, and IECEx multiple approvals (Option 05).

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Bently Nevada Proximity Probe
  • Azurfa

Sikeli (V/f)

Vector

mai amfani da wutar AC
  • Tabbatar da ainihin samfurin, lambar ɓangare, da ƙayyadaddun bayanai kafin yin oda.
  • Tabbatar da jituwa da injin ko tsarin kula da kake amfani da su a yanzu.
  • Tuntuɓe mu ta sale@etowonauto.com ko +8617859788089 don taimakon fasaha.
  • Duba zaɓuɓɓukan isarwa, lokacin jagora, da buƙatun jigilar kaya.
  • Bi umarnin masana’anta da mafi kyawun hanyoyin aiki yayin girkawa.

Kayayyakin da ke cikin sito yawanci ana tura su a cikin wannan ranar aikin. Ga kayayyakin da ba sa cikin sito a yanzu, lokacin tura su na iya bambanta bisa ga samuwa. Ana ba da jigilar kaya zuwa ƙasashen waje, kuma ana ƙididdige kuɗin jigila bisa wurin da ake aikawa, nauyi, da kamfanin sufuri da aka zaɓa.

Ana karɓar mayar da kaya cikin kwanaki 30 bayan karɓa, muddin kayan ba a yi amfani da su ba kuma suna cikin yanayin da suka fito daga masana’anta. Kuɗin jigilar mayar da kaya nauyi ne a kan abokin ciniki. Da fatan za a tuntube mu kafin ku mayar da duk wani kaya domin samun izinin mayarwa.

Don ƙarin bayani, don Allah ku duba Manufar Jigila & Mayar da Kaya.

 Duba bayanin samfur

TABBTAR DA INGANTACCEN AIKIN NA'URORI

Canza gidanka da sabbin hanyoyin na’urorin lantarki masu yawa, daga hasken wuta mai hankali zuwa inganta ayyukanka da Bently Nevada 3500 Monitoring System, wanda ke ba da sa ido a ainihin lokaci kan girgiza da yanayin na’urorin injina don hana gazawa da ƙara lokacin aiki, da na’urorin da ake sarrafa su da murya duk an ƙera su ne don sauƙaƙa rayuwa, ƙara tsaro, da ƙarfafa haɗin kai.

Sayi yanzu
Shawarwari na fasaha mataki-mataki da shawarwarin saye don sassan na’urorin sarrafa kansu na masana’antu.

Jagorar Fasaha da Siyarwa

Duba dukkan blog