1769-CRL3 Kebul Ƙarin CompactLogix Allen-Bradley

Takaitaccen Bayanin Samfur

Allen-Bradley 1769-CRL3 igiyar faɗaɗa bas ce mai ƙarfi, wadda aka ƙera don faɗaɗa haɗin gwiwar tsarin masu kula da CompactLogix da MicroLogix 1500. Wannan igiyar mita 1 (3.28 ft) tana sauƙaƙa haɗin tsakanin bankuna biyu na kayayyakin I/O, musamman tana haɗa gefen dama na banki na farko da gefen hagu na na gaba. Ta hanyar kiyaye sahihancin sadarwar backplane a nesa mai tsawo, 1769-CRL3 tana ba da damar sassauƙan tsara akwatunan kayan aiki da kuma gina tsarin sarrafawa masu rikitarwa.

Tsarin Fasaha & Tsarin Kayan Aiki

1769-CRL3 tana aiki a matsayin tsawaita jikin bas na ciki na 1769. An ƙera ta don ɗaukar siginar lissafi (logic signals) da rarraba wutar lantarki da ake buƙata domin bankunan I/O da ke nesa su yi aiki a matsayin tsarin guda ɗaya mai hade.

Haɗin Daga Dama Zuwa Hagu

Igiyar tana da na’urorin haɗi na musamman: ƙarshen igiya ɗaya yana haɗuwa da interfes ɗin bas na gefen dama na bankin I/O da yake akwai, yayin da ɗayan ƙarshen yake haɗuwa da interfes ɗin bas na gefen hagu na bankin faɗaɗawa. Wannan takamaiman juyin shugabanci yana tabbatar da cewa gudanawar bayanai tana kasancewa daidaitacciya a dukkan iyakokin kayayyaki na modula.

Garkuwar Masana’antu Mai Ƙarfi

Don yaƙar hayaniya da ke tattare da direbobin motoci da manyan injuna, an gina 1769-CRL3 da yadudduka da dama na rufi (insulation). Wannan tsarin kayan aiki mai ƙarfi yana hana lalacewar sigina, ko da lokacin da aka shimfiɗa igiyar kusa da sassan da ke da babban ƙarfin lantarki a cikin cunkushewar kwamitin kula (control panel).

Ƙayyadaddun Fasaha

Jagorar Shigarwa & Injiniya

Da kyau a tsara igiyoyi yana da matuƙar muhimmanci yayin shigar da 1769-CRL3 domin tabbatar da ingantacciyar amincin tsarin na dogon lokaci.

Hanyar Sanya Igiya (Mechanical Routing)

Lokacin shigar da 1769-CRL3, ka guji lanƙwasa igiyar fiye da ƙaramin diamitan lanƙwasawa da aka halatta gare ta. Ka kulle na’urorin haɗin (connectors) da skurugensu na kullewa da aka haɗa a ciki, don hana igiyar fita ko yagewa saboda rawar injuna.

Buƙatun Rarraba Wuta

Kowane bankin I/O da aka haɗa ta amfani da 1769-CRL3 dole ne ya sami nasa wutar 1769-PA2, -PB2, -PA4, ko -PB4 idan jimillar ƙarfin da ake ja ta wuta ta wuce iyakar wutar tushe. Kullum ka ƙirga kasafin backplane current kafin kammala shigarwa.

Fa’idodin Injiniya

• Tsarawa Mai Sassauci: Yana ba da damar rarraba kayayyakin I/O a kan dogayen DIN rails da yawa ko a cikin akwatuna (enclosures) daban-daban.
• Haɗin Kai Mai Ƙarfi: Yana samar da hanyoyin da ke da ƙaramin juriya (low-impedance) don isar da bayanai da sauri cikin aminci.
• Isar da Wuta Mai Dorewa: Yana kiyaye matakan voltaji a daidaitacce, yana tabbatar da cewa na’urorin da aka haɗa suna aiki cikin iyakokin da aka ƙayyade musu.

Tambayoyin Fasaha Masu Yawan Faruwa (FAQs)

Q1: Zan iya amfani da 1769-CRL3 don haɗa masu kula (controllers) biyu?
A1: A’a. 1769-CRL3 an tanade ta ne kawai don faɗaɗa bankunan I/O. Tana haɗa backplane na banki guda zuwa wani a cikin tsarin mai kula guda ɗaya.

Q2: Shin wannan igiyar za a iya “Hot-Swappable”?
A2: A’a. Dole ne ka cire duk wutar tsarin gaba ɗaya kafin ka haɗa ko ka cire 1769-CRL3. Idan aka kasa yin haka, na iya haifar da lalacewar lantarki ga bus connectors ko ga mai kula.

Q3: Nawa ne igiyoyin faɗaɗawa da zan iya amfani da su a cikin tsarin guda ɗaya?
A3: Tsarukan CompactLogix gabaɗaya suna goyon bayan har zuwa bankuna 3 na I/O (ta amfani da igiyoyi 2), muddin an cika sharuddan nesa da buƙatun wutar lantarki. Ka binciki iyakar yawan bankunan I/O da mai kula naka ke iya ɗauka.