Evinizi ən son çoxfunksiyalı elektronika həlləri ilə dəyişdirin, ağıllı işıqlandırmadan səsə nəzarət olunan cihazlara qədər — hamısı həyatı daha asan, təhlükəsiz və daha əlaqəli etmək üçün hazırlanıb. Əməliyyatlarınızı Bently Nevada 3500 Monitorinq Sistemi ilə optimallaşdırın, bu sistem real vaxtda vibrasiya və maşın vəziyyətinin monitorinqini təmin edərək nasazlıqların qarşısını alır və iş vaxtını maksimuma çatdırır.
SKU:IC670MDL740
IC670MDL740 GE Fanuc 24VDC 0.5A Logic Output Module
Manufacturer: General Electric
Product No.: IC670MDL740
Product Type: Positive Logic Output Module
Product Origin: USA
Payment:T/T, Western Union
Weight: 910g
Shipping port: Xiamen
Warranty: 12 months
Paylaşmaq
- Sürətli Çatdırılma
- 24/7 Dəstək
- Keyfiyyət təminatı
Təsvir
GE Fanuc IC670MDL740 Field Control 16-Point Discrete Output Module
The GE Fanuc IC670MDL740 is a high-reliability 16-point positive logic (sourcing) discrete output module from the Field Control series. Engineered to operate along a Bus Interface Unit (BIU) for versatile expansion I/O setups, it provides 16 discrete channels delivering 12/24 VDC nominal (9.2–29.5 VDC range) at 0.5 Amps per point (4 Amps maximum per module). Weighing approximately 2 pounds (0.91 kg), this module is ideal for powering low-current industrial loads like pilot lamps, solenoids, and relay coils. It features per-point LED status indication, integrated 5A group fuse protection with fault diagnostics, 1500 VAC isolation, and a 25-terminal integrated terminal block.
Technical Specifications
| Brand / Series | GE Fanuc / Field Control |
| Part Number | IC670MDL740 |
| Module Type & Logic | Discrete Output Module | Positive Logic (Sourcing) |
| Outputs & Grouping | 16 Channels | 1 Single Group |
| Output Voltage Range | 10–30 VDC (24 VDC Nominal) | Operational Range: 9.2–29.5 VDC |
| Current Output Rating | 0.5 A per point | 4.0 A maximum per module (1 mA min load) |
| Inrush Current & Voltage Drop | 2.0 A max for 100 ms | Output Drop: 0.5 V maximum |
| BIU Current Draw | 111 mA maximum from BIU Power Supply |
| Isolation Voltage | 1500 VAC for 1 minute (User Input to Logic / Frame Ground) |
| Protection & Diagnostics | 5A Slow-Blow Group Fuse | Low Voltage (<9.8 VDC) & Blown Fuse LEDs |
| Terminal Block & Wire Size | 25 Terminals | AWG #14 to #22 (Single) / AWG #18 (Two wires) |
| Shipping Weight | 2 lbs (approx. 0.91 kg) |
Quick Installation Guide
- Mount the IC670MDL740 directly onto the designated Field Control I/O base connected to the Bus Interface Unit (BIU).
- Wire loads to the 25-position terminal block using AWG #14–#22 field wiring; verify correct 24 VDC polarity to avoid blowing the protective fuse.
- Ensure an appropriately rated 5A, 250 VAC slow-blow fuse is installed in the internal fuse holder for output group protection.
Technical FAQs
Q1: What is the current switching capability of the IC670MDL740 per channel?
A1: Each output point supplies up to 0.5 Amps at 10–30 VDC, with a total module load limit of 4.0 Amps.
Q2: How does the module indicate fuse faults or power errors?
A2: Dedicated LED indicators signal a blown fuse or user supply voltage drop below 9.8 VDC, while diagnostic messages are transmitted to the BIU.
Q3: What type of replacement fuse is recommended for this output module?
A3: Use a 5 Amp, 250 VAC slow-blow type fuse designed for group short-circuit and reverse-polarity protection.
Əlavə Texniki Xüsusiyyətlər
Skalyar (V/f)
Vektor
AC ilə işləyən
Alış Rəhbəri
- Sifariş verməzdən əvvəl dəqiq model, hissə nömrəsi və spesifikasiyaları təsdiqləyin.
- Mövcud maşın və ya idarəetmə sistemlərinizlə uyğunluğu təmin edin.
- Texniki dəstək üçün sale@etowonauto.com ünvanına və ya +8617859788089 nömrəsinə müraciət edin.
- Çatdırılma variantlarını, çatdırılma müddətlərini və göndərmə tələblərini nəzərdən keçirin.
- Quraşdırma zamanı istehsalçı təlimatlarına və ən yaxşı təcrübələrə əməl edin.
Göndərmə və Qaytarma
Anbarda olan məhsullar adətən eyni iş günü göndərilir. Hal-hazırda stokda olmayan məhsullar üçün göndərmə vaxtları mövcudluğa görə dəyişə bilər. Beynəlxalq çatdırılma mövcuddur və çatdırılma xərcləri təyinat, çəki və daşıyıcı seçiminə əsasən hesablanır.
Qaytarma məhsulun qəbulundan etibarən 30 gün ərzində qəbul edilir, məhsullar istifadə olunmamış və orijinal vəziyyətdə olduqda. Qaytarma göndərmə xərcləri müştərinin üzərinə düşür. Hər hansı məhsulu qaytarmazdan əvvəl qaytarma icazəsi almaq üçün bizimlə əlaqə saxlayın.
Ətraflı məlumat üçün zəhmət olmasa Çatdırılma və Qaytarma Siyasətimizi nəzərdən keçirin.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Sürətli Çatdırılma
Orijinal sənaye avtomatlaşdırma hissələri dünya üzrə sürətli çatdırılma üçün mövcuddur.
-
Asan Qaytarma
Etibarlı satış sonrası qoruma üçün 12 aylıq zəmanətlə 30 günlük geri qaytarma dəstəyi.
-
24/7 dəstək
Stabil və səmərəli əməliyyatların davam etdirilməsinə kömək edən çevik peşəkar dəstək.
-
Əsl və Orijinal
100% orijinal, birbaşa etibarlı sənaye avtomatlaşdırma istehsalçılarından əldə olunub.
Texniki və Alış Bələdçisi
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
-
What CFC Rules Cut PCS7 Batch Abort Rates Fast?
This article presents enforceable CFC programming governance rules for Siemens PCS7 DCS batch plants, covering b...
-
What Makes the 1769-L3ER Ideal for Compact Skid Automation?
This guide explains how the Allen-Bradley 1769 CompactLogix L3ER bridges the gap between micro PLCs and large DC...
-
Why Do SIL3 Safety Interlocks Still Trip in Industrial Plants?
This article reviews Honeywell Safety Manager SIL3 SIS architecture, wiring and cabinet installation rules, PFDa...
-
How Does Poor Grounding Cause 4-20mA Signal Drift?
This guide explains how MTL signal isolators fail through distortion, drift and EMI in PLC and DCS loops, then d...
