Məzmunu keçin
Avtomatlaşdırma hissələri, dünya üzrə təchizat
Məhsul məlumatına keçin
1 -nın, -nin, -nun, -nün (context-dependent possessive suffix) 3

SKU:V18345-1010221001

ABB V18345-1010221001 Valve Positioner | Original Stock

Anbarda (25 ədəd), göndərilməyə hazırdır
  • Manufacturer: ABB

  • Product No.: V18345-1010221001

  • Product Type: Valve Positioner Module

  • Product Origin: Sweden

  • Payment:T/T, Western Union

  • Weight: 1700g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 Günlük Qaytarma Siyasəti · 12 Aylıq Zəmanət
  • Sürətli Çatdırılma
  • 24/7 Dəstək
  • Keyfiyyət təminatı

Təsvir

ABB V18345-1010221001 Valve Positioner

The V18345-1010221001 (also cataloged as the V18345 Valve Positioner) is a TZIDC-120 intelligent positioner in a varnished aluminium case rated IP 65 (NEMA 4X). It accepts a 4-20 mA two-wire input and provides single-acting, fail-freeze output for linear actuators to DIN/IEC 534 / NAMUR or rotary actuators to VDI/VDE 3845. Unit weight is 1.7 kg.

Hardware Specifications

Parameter Specification
Model V18345-1010221001
Brand ABB
Product Type Valve Positioner (TZIDC-120)
Enclosure Aluminium, varnished, IP 65 (NEMA 4X)
Weight 1.7 kg
Input Signal 4-20 mA, two-wire
Input Limit Max. 25 mA / 30 V
Impedance at 20 mA 435 ohms
Output Range 0 to 6 bar (0 to 90 psi)
Air Capacity at 6 bar 13 kg/h = 10 Nm3/h = 6.0 scfm
Output Function Single acting, fail freeze
Pneumatic Connections Air pipe: Thread 1/4-18 NPT
Electrical Connections Cable: Thread 1/2-14 NPT
Position Feedback Plug-in analog module, 4-20 mA
Explosion Protection Without

Electropneumatic Control Characteristics

The V18345 positioner uses two-wire technology with a nominal 4-20 mA range and supports split range configuration between 20 % and 100 % of nominal range. Minimum operating current is 3.4 mA without analog position feedback and 3.5 mA with the feedback module installed; start-up is from 3.8 mA. Load voltage at 20 mA is 8.7 V DC with a 435 ohm input impedance. A digital input accepts 24 V DC (12-30 V DC), with 0-10 V DC interpreted as logical 0 and 12-30 V DC as logical 1, drawing a maximum of 4 mA. The digital output follows the DIN 19234/NAMUR control circuit at 5-11 V DC, with less than 1.0 mA as logical 0 and greater than 2.0 mA as logical 1. Pneumatic output spans 0 to 6 bar (0 to 90 psi); air capacity at a 6 bar supply is 13 kg/h (10 Nm3/h, 6.0 scfm). Shut-off values are adjustable to 0-45 % at end position 0 % and 55-100 % at end position 100 %. The unit weighs 1.7 kg.

Field Installation Guidelines

Mount the positioner to a linear actuator per DIN/IEC 534 / NAMUR or to a rotary actuator per VDI/VDE 3845 using the mechanical kit. Verify the varnished aluminium case remains sealed to maintain IP 65 (NEMA 4X) integrity. Confirm the 1.7 kg unit is supported by the actuator mounting bracket during installation. Connect the 4-20 mA two-wire input through the 1/2-14 NPT cable entry and the air supply through the 1/4-18 NPT air pipe port. Confirm supply air is dry and oil-free at or below 6 bar before pressurizing. Route signal wiring separately from AC power conductors. Set the split range and fail-freeze action in configuration before placing the loop in service. Verify shut-off values at both end positions after commissioning.

Frequently Asked Questions

Q: What is the input signal and impedance of the V18345-1010221001?
A: 4-20 mA two-wire input with 435 ohms impedance at 20 mA.

Q: What is the fail-safe action of this configuration?
A: Single acting, fail freeze.

Q: What are the pneumatic and electrical connection thread sizes?
A: Air pipe: 1/4-18 NPT; cable: 1/2-14 NPT.

Product Resources

📄 Download PDF
  • Gümüş

Skalyar (V/f)

Vektor

AC ilə işləyən

  • Sifariş verməzdən əvvəl dəqiq model, hissə nömrəsi və spesifikasiyaları təsdiqləyin.
  • Mövcud maşın və ya idarəetmə sistemlərinizlə uyğunluğu təmin edin.
  • Texniki dəstək üçün sale@etowonauto.com ünvanına və ya +8617859788089 nömrəsinə müraciət edin.
  • Çatdırılma variantlarını, çatdırılma müddətlərini və göndərmə tələblərini nəzərdən keçirin.
  • Quraşdırma zamanı istehsalçı təlimatlarına və ən yaxşı təcrübələrə əməl edin.

Anbarda olan məhsullar adətən eyni iş günü göndərilir. Hal-hazırda stokda olmayan məhsullar üçün göndərmə vaxtları mövcudluğa görə dəyişə bilər. Beynəlxalq çatdırılma mövcuddur və çatdırılma xərcləri təyinat, çəki və daşıyıcı seçiminə əsasən hesablanır.

Qaytarma məhsulun qəbulundan etibarən 30 gün ərzində qəbul edilir, məhsullar istifadə olunmamış və orijinal vəziyyətdə olduqda. Qaytarma göndərmə xərcləri müştərinin üzərinə düşür. Hər hansı məhsulu qaytarmazdan əvvəl qaytarma icazəsi almaq üçün bizimlə əlaqə saxlayın.

Ətraflı məlumat üçün zəhmət olmasa Çatdırılma və Qaytarma Siyasətimizi nəzərdən keçirin.

Məhsul Təfərrüatlarına Baxın

ETIBARLI MAŞIN PERFORMANSINI TƏMİN EDİN

Evinizi ən son çoxfunksiyalı elektronika həlləri ilə dəyişdirin, ağıllı işıqlandırmadan səsə nəzarət olunan cihazlara qədər — hamısı həyatı daha asan, təhlükəsiz və daha əlaqəli etmək üçün hazırlanıb. Əməliyyatlarınızı Bently Nevada 3500 Monitorinq Sistemi ilə optimallaşdırın, bu sistem real vaxtda vibrasiya və maşın vəziyyətinin monitorinqini təmin edərək nasazlıqların qarşısını alır və iş vaxtını maksimuma çatdırır.