Bently Nevada 330101-00-60-10-01-00 3300 XL 8mm Vibration Probe

Product Overview

The Bently Nevada 330101-00-60-10-01-00 is an 8 mm eddy current proximity transducer probe from the industry-standard 3300 XL series. Manufactured in the U.S.A., this non-contact vibration and axial position probe is designed for continuous monitoring of critical industrial rotating machinery, including steam turbines, gas turbines, compressors, and large pumps.

This specific part number configuration (330101-00-60-10-01-00) features an unthreaded 3/8-24 UNF stainless steel case, an overall length option of 6.0 inches case length, a 1.0-meter integrated ClickLoc coaxial cable, miniature coaxial connectors with connector protectors, and multiple agency approvals (ATEX, IECEx, CSA, FM) for hazardous area deployment. Built with a net unit weight of approximately 323 g/m (11.4 oz/ft) for the cable assembly and a total net probe weight of approximately 0.23 kg (0.50 lbs), it is constructed from AISI 303/304 stainless steel with Viton® sealing to operate reliably across extreme temperatures from -52°C to +260°C (-62°F to +500°F).

Core Technical Advantages

• Patented CableLoc Security: Features a ruggedized internal cable anchor capable of withstanding 330 N (75 lbf) pull force—40% stronger than legacy probe designs.
• Linear Signal Integrity: Delivers a standardized 7.87 V/mm (200 mV/mil) incremental scale factor with ±5% accuracy and ±0.025 mm (±1 mil) linearity.
• Hazardous Location Certified: Fully approved under Multiple Agency approvals for intrinsic safety and non-incendive environments globally.
• Extended Mechanical Durability: Solid 8 mm tip provides 25% greater resistance to impact damage, backed by IP67-equivalent ingress protection against fluids and contaminants.

Technical Specifications

Installation & Gap Calibration Guide

• Mechanical Installation: Thread the 3/8-24 UNF probe body into the internal bracket or housing, torqueing properly without twisting the output coaxial cable.
• Gap Adjustment: Adjust mechanical clearance until the Proximitor Sensor output reads -9.00 V DC baseline (corresponding to the mid-scale gap of approximately 1.0 mm / 40 mils).
• ClickLoc Connector Care: Ensure the miniature coaxial connector clicks firmly into the extension cable, then slide the rubber connector protector over the joint to seal out moisture and dirt.

Technical FAQs

Q1: What does model number 330101-00-60-10-01-00 indicate?
A1: Bently Nevada 3300 XL 8mm probe, 3/8-24 UNF thread, 6.0in case, with connector protector & approvals. (98 chars)

Q2: Is the 330101-00-60-10-01-00 probe certified for hazardous locations?
A2: Yes, the 01 agency option includes global hazardous area certifications like ATEX, IECEx, and CSA. (96 chars)

Q3: What is the weight specification of the 330101-00-60-10-01-00 probe?
A3: Total net probe weight is approx. 0.23 kg (0.50 lbs) with a cable weight of 323 g/m (11.4 oz/ft). (95 chars)