Avtomatlashtirish qismlari, butun dunyo bo‘ylab ta’minot
0
  • IC693APU301
  • IC693APU301-1
  • IC693APU301-2
1 3

IC693APU301

GE Fanuc IC693APU301 Positioning Module | Original Stock

Omborda (21 dona), jo'natishga tayyor

  • Manufacturer: General Electric

  • Product No.: IC693APU301

  • Product Type: Axis Positioning Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 kunlik qaytarish siyosati · 12 oylik kafolat
  • Tez yetkazib berish
  • 24/7 Qo'llab-quvvatlash
  • Sifat nazorati

Tavsif

GE Fanuc IC693APU301 Single Axis Positioning Module

The IC693APU301 (also cataloged as the APU301 Single Axis Positioning Module) executes motion control within the GE Series 90-30 PLC backplane. It integrates axis positioning with PLC logic solving, providing one axis of servo loop control per module in a single-slot form factor.

Hardware Specifications

Parameter Specification
Model IC693APU301
Brand GE Fanuc
Product Type Single Axis Positioning Module (APM)
Platform Series 90-30 PLC
Number of Axes 1
Servo Loop Update Time 1 millisecond
Control Method Logic-based axis control
Operating Modes Standard mode, Follower mode
Max Modules per CPU 8 in a modular CPU system
Installation Any Series 90-30 CPU, remote baseplate, or expansion baseplate
Configuration Software VersaPro
Weight Approx. 0.5 kg (module only)

Motion Control Modes

The IC693APU301 operates in two selectable modes. Standard mode combines motion control with PLC logic solving, allowing the module to execute positioning programs while the CPU scans ladder logic. Follower mode enables electronic gearing, where the axis follows a master encoder or command source for continuous master/slave operations. Axis control is logic-based, with the servo loop closed every 1 millisecond. Up to 8 modules can reside in a modular CPU system, giving a maximum of 8 axes per rack configuration.

Field Installation Guidelines

Insert the module into any available slot in the Series 90-30 CPU, remote baseplate, or expansion baseplate. Verify the backplane connector is fully seated before applying power. Confirm the total number of APM modules does not exceed 8 in a modular CPU system. Route servo command and encoder feedback cables separately from high-voltage AC conductors to prevent induced noise on the 1 millisecond loop. Use shielded cable for encoder and analog command lines, with the shield terminated at the module end only. Configure axis parameters in VersaPro before enabling the servo. Verify the 1 millisecond servo loop update is stable by monitoring axis following error under load.

Frequently Asked Questions

Q: How many IC693APU301 modules can be installed in one system?
A: Up to 8 modules in a modular CPU system. Each module provides one axis of control.

Q: Can the module be installed in a remote baseplate?
A: Yes. It can be installed in any Series 90-30 CPU, remote baseplate, or expansion baseplate.

Q: What software is used for configuration?
A: VersaPro software is recommended for setup and configuration of motion programs.

🏷️ Tags: Positioning Module

Skalyar (V/f)

Vektor

AC quvvatli
  • Buyurtma berishdan oldin aniq model, qism raqami va texnik xususiyatlarni tasdiqlang.
  • Joriy mashinalaringiz yoki boshqaruv tizimlaringiz bilan mosligini ta’minlang.
  • Texnik yordam uchun sale@etowonauto.com manzili yoki +8617859788089 raqamiga murojaat qiling.
  • Yetkazib berish variantlari, yetkazib berish muddati va jo‘natish talablarini ko‘rib chiqing.
  • O‘rnatish paytida ishlab chiqaruvchi ko‘rsatmalariga va eng yaxshi amaliyotlarga rioya qiling.

Omborda mavjud bo‘lgan mahsulotlar odatda shu ish kuni jo‘natiladi. Hozirda omborda mavjud bo‘lmagan mahsulotlar uchun jo‘natish vaqti mavjudlikka qarab o‘zgarishi mumkin. Xalqaro yetkazib berish mavjud bo‘lib, yetkazib berish xarajatlari manzil, vazn va tashuvchi tanloviga ko‘ra hisoblanadi.

Qaytishlar qabul qilingan kundan boshlab 30 kun ichida amalga oshiriladi, agar mahsulotlar ishlatilmagan va asl holatda bo‘lsa. Qaytish xarajatlari mijoz zimmasida bo‘ladi. Iltimos, har qanday mahsulotni qaytarishdan oldin qaytish ruxsatini olish uchun biz bilan bog‘laning.

Batafsil ma’lumot uchun iltimos, Yetkazib berish va Qaytarish Siyosatini ko‘rib chiqing.

 Mahsulot tafsilotlarini ko‘rish

Ishonchli mashina ishlashini ta’minlash

Uyingizni eng so‘nggi ko‘p funksiyali elektronika yechimlari bilan o‘zgartiring, aqlli yoritishdan tortib ovozli boshqariladigan qurilmalargacha — bularning barchasi hayotingizni osonroq, xavfsizroq va yanada bog‘langan qilish uchun mo‘ljallangan.

Hozir xarid qiling
Sanoat avtomatizatsiyasi qismlari uchun bosqichma-bosqich texnik maslahatlar va xarid qilish bo'yicha tavsiyalar.

Texnik va Xarid Qollanmasi

Barcha bloglarni ko‘rish