Evinizi, akıllı aydınlatmadan ses kontrollü cihazlara kadar hayatı daha kolay, güvenli ve bağlantılı hale getirmek için tasarlanmış en yeni çoklu elektronik çözümlerle dönüştürün. Arızaları önlemek ve çalışma süresini maksimize etmek için gerçek zamanlı titreşim ve makine durumu izleme sunan Bently Nevada 3500 İzleme Sistemi ile operasyonlarınızı optimize edin.
SKU:V18345-1010520001
Valve Positioner ABB V18345-1010520001
Manufacturer: ABB
Product No.: V18345-1010520001
Product Type: Valve Positioner Module
Product Origin: Sweden
Payment:T/T, Western Union
Weight: 1700g
Shipping port: Xiamen
Warranty: 12 months
Paylaş
- Hızlı Teslimat
- 7/24 Destek
- Kalite Güvencesi
Açıklama
Product Overview
ABB V18345-1010520001 is an electro-pneumatic valve positioner from the TZIDC series, built for precise control of pneumatic actuators on large rotary machinery. It converts a 4–20 mA control signal into a proportional air output, achieving 0.5% linearity and ±0.2% repeatability. The non-contact position sensor eliminates mechanical wear, delivering stable performance in turbine, compressor, and process valve applications.
Technical Configuration
Core Hardware
The positioner uses a piezoresistive pressure sensor for air output feedback and a Hall-effect sensor for valve stem position. The HART protocol enables remote calibration and diagnostics without breaking the air loop. A local LCD and push-buttons allow on-site setup, zero/span adjustment, and fault readout.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Signal | 4–20 mA (HART) |
| Air Supply | 1.4–6.0 bar |
| Air Consumption | ≤0.03 kg/h (steady state) |
| Linearity | ±0.5% of span |
| Repeatability | ±0.2% of span |
| Operating Temperature | -40°C to +80°C |
| Protection Class | IP65 |
| Pneumatic Ports | 1/4" NPT |
| Electrical Entry | M20×1.5 |
| Housing Material | Aluminum, powder-coated |
| Weight | Approx. 1.7 kg |
Installation Guide
Mount the positioner rigidly on the actuator yoke and verify the feedback lever travels 0–100% without binding. Set the air supply to 1.4 bar minimum; below this, the output may not reach full stroke. Keep cable bend radius above 50 mm and route signal wiring away from VFD cables. For explosive atmospheres, confirm the certification label matches the zone classification before energizing.
Engineering Advantages
The TZIDC platform tolerates supply air contaminated with oil and dust, reducing downtime in dirty plant environments. The aluminum housing resists corrosion in coastal and chemical plants. HART diagnostics report valve signature data, helping maintenance teams plan repairs before a trip occurs. The unit drops into existing 4–20 mA loops without extra wiring.
Technical FAQs
Q1: How do I verify the positioner is calibrated correctly?
A1: Apply 4 mA and confirm the valve reaches 0% stroke; apply 20 mA and confirm 100%. Check the LCD readout matches the actual stem position within ±0.5%.
Q2: What does the 1010520001 suffix indicate?
A2: It defines the analog HART input, double-acting output, IP65 aluminum housing, and standard temperature range. Confirm against the nameplate before ordering spares.
Q3: Can this unit replace an older TZIDC positioner?
A3: Yes, it shares the same mounting footprint and 4–20 mA interface. Verify the pneumatic port size and cable entry match the existing installation.
Ek Özellikler
- Gümüş
Skaler (V/f)
Vektör
AC ile çalışan
Satın Alma Rehberi
- Sipariş vermeden önce kesin model, parça numarası ve teknik özellikleri doğrulayın.
- Mevcut makine veya kontrol sistemlerinizle uyumluluğu kontrol edin.
- Teknik destek için sale@etowonauto.com adresinden veya +8617859788089 numarasından iletişime geçin.
- Teslimat seçeneklerini, teslim sürelerini ve nakliye gereksinimlerini inceleyin.
- Kurulum sırasında üretici talimatlarını ve en iyi uygulamaları takip edin.
Gönderim ve İade
Stokta bulunan ürünler genellikle aynı iş günü içinde gönderilir. Şu anda stokta olmayan ürünler için gönderim süreleri, ürünün bulunabilirliğine göre değişiklik gösterebilir. Uluslararası gönderim mevcuttur ve gönderim ücretleri varış yeri, ağırlık ve taşıyıcı seçimine göre hesaplanır.
Ürünler kullanılmamış ve orijinal durumda olmak koşuluyla, teslim alındıktan sonraki 30 gün içinde iade kabul edilir. İade gönderim ücretleri müşteriye aittir. Lütfen herhangi bir ürünü iade etmeden önce iade onayı almak için bizimle iletişime geçin.
Daha fazla bilgi için lütfen Gönderim ve İade Politikamızı inceleyin.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Hızlı Gönderim
Orijinal endüstriyel otomasyon parçaları, dünya çapında hızlı gönderim için mevcuttur.
-
Kolay İade
Güvenilir satış sonrası koruma için 12 aylık garanti ile 30 gün iade desteği.
-
7/24 destek
Kararlı ve verimli operasyonların sürdürülmesine yardımcı olmak için duyarlı profesyonel destek.
-
Orijinal ve Gerçek
%100 orijinal, güvenilir endüstriyel otomasyon üreticilerinden doğrudan temin edilmiştir.
Teknik ve Satın Alma Rehberi
-
When Should You Replace a Yokogawa Analog IO Card?
This article breaks down Yokogawa analog AI/AO card calibration tolerances, drift aging benchmarks, and formal replac...
-
What Performance Gains Does S7-1500 Offer Over Legacy S7 PLCs?
Legacy Siemens S7-300 and S7-400 PLCs face spare-part shortages, rising failure rates and limited network capability,...
-
What Logic Changes Cut SIS False Trips by 94%?
This article examines practical logic modification and parameter tuning methods for ABB 800xA HI SIL3 safety ins...
-
Why Do FTE Redundancy Failovers Lock Up in DCS?
Honeywell FTE delivers sub-500 ms failover for Experion PKS, yet field records show 38% of outages stem from installa...
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
